Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093779807, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling

Diti gari beká

EAN: 4031093779807
Type: N
Designation: Ball nose slot drill (2-fluted)
Helix angle: 30
Diameter range: 0.500 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Bogo a namba kosa

Namba oda	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Reko mitia
5585 3.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Benunu da
5585 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Benunu da
5585 0.500	1.70 mm	28.00 mm	38.00 mm	3.00 mm	0.50 mm	Benunu da
5585 1.000	3.25 mm	28.00 mm	38.00 mm	3.00 mm	1.00 mm	Benunu da
5585 1.500	5.50 mm	28.00 mm	38.00 mm	3.00 mm	1.50 mm	Benunu da
5585 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Benunu da
5585 5.000	15.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Benunu da
5585 12.000	35.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Benunu da
5585 2.000	8.50 mm	36.00 mm	57.00 mm	6.00 mm	2.00 mm	Benunu da
5585 10.000	29.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Benunu da
5585 4.000	12.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Benunu da
5585 6.000	17.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Benunu da