HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844394773, Cutting material: Solid carbide, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling

Diti gari beká

EAN: 4049844394773
Type: N
Designation: HPC end mills (4-fluted)
Helix angle: 35/38
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Bogo a namba kosa

Namba oda	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Reko mitia
19941 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Benunu da
19941 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Benunu da
19941 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Benunu da
19941 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Benunu da
19941 14.000	35.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Benunu da
19941 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Benunu da
19941 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Benunu da
19941 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Benunu da
19941 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Benunu da
19941 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Benunu da