← Buka sarama
Kosa gari domo tatara etoto
3111
End mill with corner radius (4-fluted)
End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093717878, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling
Diti gari beká
- EAN
- 4031093717878
- Type
- N
- Surface
- bright
- Designation
- End mill with corner radius (4-fluted)
- Helix angle
- 30
- Diameter range
- 6.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
Bogo a namba kosa
| Namba oda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Reko mitia | Omene benunu |
|---|---|---|---|---|---|---|---|
| 3111 6.005 | 19.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Benunu da | |
| 3111 20.010 | 56.40 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Benunu da | |
| 3111 16.020 | 46.72 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Benunu da | |
| 3111 12.015 | 37.04 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Benunu da | |
| 3111 10.010 | 32.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Benunu da | |
| 3111 8.005 | 27.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Benunu da | |
| 3111 16.015 | 46.72 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Benunu da | |
| 3111 12.005 | 37.04 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Benunu da | |
| 3111 10.015 | 32.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Benunu da | |
| 3111 16.010 | 46.72 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Benunu da | |
| 3111 20.020 | 56.40 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Benunu da | |
| 3111 10.008 | 32.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Benunu da | |
| 3111 12.020 | 37.04 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Benunu da | |
| 3111 8.015 | 27.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Benunu da | |
| 3111 8.020 | 27.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Benunu da | |
| 3111 12.008 | 37.04 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Benunu da | |
| 3111 20.015 | 56.40 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Benunu da | |
| 3111 8.010 | 27.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Benunu da | |
| 3111 10.005 | 32.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Benunu da | |
| 3111 10.020 | 32.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Benunu da | |
| 3111 6.010 | 19.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Benunu da | |
| 3111 12.010 | 37.04 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Benunu da |