← Vörulisti
Bentu á myndina til að stækka
6717
Kevlar end mill CR 100
Kevlar end mill CR 100. Designation: Kevlar end mill CR 100, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844102965, Cutting material: Solid carbide, Surface: Cristall F, Product family: CR 100, Back rake angle: 10, Length picto milling: long, Type of machine interface: HA, Feed direction: lateral
Tæknilegar upplýsingar
- EAN
- 4049844102965
- Surface
- Cristall F
- Designation
- Kevlar end mill CR 100
- Diameter range
- 4.000 mm – 16.000 mm
- Feed direction
- lateral
- Product family
- CR 100
- Back rake angle
- 10
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HA
Mál og pöntunarnúmer
| Pöntunarnúmer | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Fáanleiki | Óska eftir verði |
|---|---|---|---|---|---|---|---|
| 6717 8.000 | 30.00 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | Samkvæmt beiðni | |
| 6717 10.000 | 39.00 mm | 40.00 mm | 80.00 mm | 10.00 mm | 10.00 mm | Samkvæmt beiðni | |
| 6717 16.000 | 49.00 mm | 48.00 mm | 108.00 mm | 16.00 mm | 16.00 mm | Samkvæmt beiðni | |
| 6717 4.000 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Samkvæmt beiðni | |
| 6717 12.000 | 46.00 mm | 45.00 mm | 93.00 mm | 12.00 mm | 12.00 mm | Samkvæmt beiðni | |
| 6717 6.000 | 26.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | Samkvæmt beiðni |