Vörulisti

Tæknilýsingar, mál og birgðastaða fyrir hvert verkfæri.

3387 / 3387

1974

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

3 vörur

1973

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

3 vörur

1975

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

1 vörur

1583

Fluteless machine tap for UNC-threads

2 vörur

2274

Fluteless machine tap for UNC-threads

5 vörur

2845

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

7 vörur

2841

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

Machine tap for UN-threads. Designation: Machine tap for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 vörur

940

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 vörur

933

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

5 vörur

934

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 vörur

881

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

7 vörur

4719

Shrink fit extension

Shrink fit extension. Designation: Shrink fit extension, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

51 vörur

4401

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M5 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 vörur

4204

PCD cartridge

PCD cartridge. Designation: PCD cartridge, Diameter range: 30.000 mm – 30.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

3 vörur

5699

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M5 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 vörur

4753

Induction shrink fit system

Induction shrink fit system. Designation: Induction shrink fit system, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 vörur

4730

Induction shrink fit system

Induction shrink fit system. Designation: Induction shrink fit system, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

1 vörur

4742

Induction shrink fit system

Induction shrink fit system. Designation: Induction shrink fit system, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 vörur

4752

Induction shrink fit system

Induction shrink fit system. Designation: Induction shrink fit system, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 vörur

7726

Indexable insert

Indexable insert. Designation: Indexable insert, Diameter range: 1.000 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

2 vörur

1947

Round indexable insert

Round indexable insert. Designation: Round indexable insert, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

4 vörur

1437

Woodruff keys

Woodruff keys. Designation: Woodruff keys, Diameter range: 13.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

6 vörur

25609

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

1 vörur

25907

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

1 vörur

25923

Lubricating paste for clamping screws

Lubricating paste for clamping screws. Designation: Lubricating paste for clamping screws, Total length: 1.00 mm, EAN: 4049844372696

1 vörur

25232

Cutting insert for internal square

Cutting insert for internal square. Designation: Cutting insert for internal square, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

5 vörur

25906

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

1 vörur

25090

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

13 vörur

25075

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

27 vörur

25901

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

9 vörur

25902

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

2 vörur

25749

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 vörur

4664

MAS/BT hydro expansion chuck

MAS/BT hydro expansion chuck. Designation: MAS/BT hydro expansion chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

1 vörur

4327

Synchro tapping chuck HSK-A

Synchro tapping chuck HSK-A. Designation: Synchro tapping chuck HSK-A, Diameter range: 4.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

5 vörur

4604

MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A

4 vörur

4939

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 vörur

4663

SK hydro expansion chuck

SK hydro expansion chuck. Designation: SK hydro expansion chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

1 vörur

4350

Extension HSK-A / HSK-C

Extension HSK-A / HSK-C. Designation: Extension HSK-A / HSK-C, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

9 vörur

4619

SK hydro expansion chuck

SK hydro expansion chuck. Designation: SK hydro expansion chuck, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

3 vörur

4298

MQL synchro tapping chuck HSK-A for manual tool change

MQL synchro tapping chuck HSK-A for manual tool change. Designation: MQL synchro tapping chuck HSK-A for manual tool change, Diameter range: 4.5 - 20.0, TA

2 vörur

4343

HSK-A adaptor for tapping chucks

HSK-A adaptor for tapping chucks. Designation: HSK-A adaptor for tapping chucks, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

4 vörur

4241

Threaded pin for hydro clamping chucks

Threaded pin for hydro clamping chucks. Designation: Threaded pin for hydro clamping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

6 vörur

4367

Hydraulic chuck

Hydraulic chuck. Designation: Hydraulic chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","

1 vörur

4328

Quick change tapping chuck HSK-A

Quick change tapping chuck HSK-A. Designation: Quick change tapping chuck HSK-A, Diameter range: M3.5 - M20, Internal diameter: 19.00 mm, TABLE_INFO_PASSON

2 vörur

4946

Tool setting fixture

Tool setting fixture. Designation: Tool setting fixture, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

4 vörur

4602

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for automatic tool change cycle

4 vörur

4351

Extension HSK-C

Extension HSK-C. Designation: Extension HSK-C, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

5 vörur

4662

HSK-A hydro expansion chuck

HSK-A hydro expansion chuck. Designation: HSK-A hydro expansion chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

1 vörur

4244

HPC chuck MAS/BT

HPC chuck MAS/BT. Designation: HPC chuck MAS/BT, Diameter range: 16.0 - 32.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

9 vörur

4790

MAS/BT DC shrink fit chuck with axial plane

MAS/BT DC shrink fit chuck with axial plane. Designation: MAS/BT DC shrink fit chuck with axial plane, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"a

11 vörur

4300

HPC chuck HSK-A

HPC chuck HSK-A. Designation: HPC chuck HSK-A, Diameter range: 3.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

6 vörur

4603

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for automatic tool change cycle

4 vörur

4596

HSK-A hydro expansion chuck slim design 3°

HSK-A hydro expansion chuck slim design 3°. Designation: HSK-A hydro expansion chuck slim design 3°, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr

16 vörur

4296

HSK-A hydro expansion chuck with radial length adjustment

HSK-A hydro expansion chuck with radial length adjustment. Designation: HSK-A hydro expansion chuck with radial length adjustment, Internal diameter: 12.00

38 vörur

4513

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 3.60 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

10 vörur

4206

Quick change tapping chuck adaptor

Quick change tapping chuck adaptor. Designation: Quick change tapping chuck adaptor, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

21 vörur

4231

ISO taper milling arbor

ISO taper milling arbor. Designation: ISO taper milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

9 vörur

4666

Hydraulic chucks set

Hydraulic chucks set. Designation: Hydraulic chucks set, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

4 vörur

4243

HPC chuck CAT

HPC chuck CAT. Designation: HPC chuck CAT, Diameter range: 16.0 - 32.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val"

4 vörur

4741

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 20.

82 vörur

4729

ISO taper shrink fit chucks

ISO taper shrink fit chucks. Designation: ISO taper shrink fit chucks, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

18 vörur

4788

ISO taper shrink fit chuck, slim design 3°

ISO taper shrink fit chuck, slim design 3°. Designation: ISO taper shrink fit chuck, slim design 3°, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"att

33 vörur

4213

SK hydro expansion chuck with increased clamping force

SK hydro expansion chuck with increased clamping force. Designation: SK hydro expansion chuck with increased clamping force, Internal diameter: 10.00 mm, T

16 vörur

4764

Shrink fit chuck

Shrink fit chuck. Designation: Shrink fit chuck, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

34 vörur

4800

ISO taper milling arbor

ISO taper milling arbor. Designation: ISO taper milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

36 vörur

4787

HSK-A shrink fit chuck, slim design 3°

HSK-A shrink fit chuck, slim design 3°. Designation: HSK-A shrink fit chuck, slim design 3°, Internal diameter: 5.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

33 vörur

4618

HSK-A hydro expansion chuck

HSK-A hydro expansion chuck. Designation: HSK-A hydro expansion chuck, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

15 vörur

4622

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Diameter range: 6 - 16, Internal diameter: 1.60 mm, TABLE_INFO_PASSON: [{"attr":"P

83 vörur

4728

MAS/BT shrink fit chuck

MAS/BT shrink fit chuck. Designation: MAS/BT shrink fit chuck, Internal diameter: 32.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-

10 vörur

4295

HSK-C hydro expansion chuck with radial length adjustment

HSK-C hydro expansion chuck with radial length adjustment. Designation: HSK-C hydro expansion chuck with radial length adjustment, Internal diameter: 32.00

22 vörur

4727

ISO taper shrink fit chucks

ISO taper shrink fit chucks. Designation: ISO taper shrink fit chucks, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

10 vörur

4726

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

20 vörur

4735

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

82 vörur

4739

MAS/BT shrink fit chuck

MAS/BT shrink fit chuck. Designation: MAS/BT shrink fit chuck, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

52 vörur

4620

MAS/BT hydro expansion chuck

MAS/BT hydro expansion chuck. Designation: MAS/BT hydro expansion chuck, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 vörur

4554

Clamping set PowerClamp

Clamping set PowerClamp. Designation: Clamping set PowerClamp, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

7 vörur

4209

MQL hydro expansion chuck for manual tool change cylce HSK-A

MQL hydro expansion chuck for manual tool change cylce HSK-A. Designation: MQL hydro expansion chuck for manual tool change cylce HSK-A, Internal diameter:

46 vörur

4613

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 18.00 mm, TABLE_INFO_

200 vörur

4940

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 vörur

4301

HPC chuck SK

HPC chuck SK. Designation: HPC chuck SK, Diameter range: 3.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

6 vörur

4789

HSK-E shrink fit chuck, slim design 3°

HSK-E shrink fit chuck, slim design 3°. Designation: HSK-E shrink fit chuck, slim design 3°, Internal diameter: 5.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

23 vörur

4930

MQL clamping set

MQL clamping set. Designation: MQL clamping set, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

9 vörur

4915

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 390.00 mm, EAN: 4031093391610, Standard: Company std.

10 vörur

4341

MQL synchro tapping chuck HSK-A for automatic tool change cycle

MQL synchro tapping chuck HSK-A for automatic tool change cycle. Designation: MQL synchro tapping chuck HSK-A for automatic tool change cycle, Diameter ran

4 vörur

4755

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

40 vörur

4330

MQL synchro tapping chuck HSK-A for automatic tool change cycle

MQL synchro tapping chuck HSK-A for automatic tool change cycle. Designation: MQL synchro tapping chuck HSK-A for automatic tool change cycle, Diameter ran

5 vörur

4758

HSK-C shrink fit chuck

HSK-C shrink fit chuck. Designation: HSK-C shrink fit chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

48 vörur

4299

Hydro expansion chuck with increased clamping force

Hydro expansion chuck with increased clamping force. Designation: Hydro expansion chuck with increased clamping force, Internal diameter: 14.00 mm, TABLE_I

82 vörur

4612

MQL hydro expansion chuck for automatic tool change cycle HSK-A

MQL hydro expansion chuck for automatic tool change cycle HSK-A. Designation: MQL hydro expansion chuck for automatic tool change cycle HSK-A, Internal dia

119 vörur

4738

ISO taper shrink fit chucks

ISO taper shrink fit chucks. Designation: ISO taper shrink fit chucks, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

79 vörur

4267

HSK-C hydro expansion chuck with increased clamping force

HSK-C hydro expansion chuck with increased clamping force. Designation: HSK-C hydro expansion chuck with increased clamping force, Internal diameter: 10.00

26 vörur

4511

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 vörur

4361

Shell milling arbor

Shell milling arbor. Designation: Shell milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

22 vörur

4736

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

132 vörur

4737

HSK-E shrink fit chuck

HSK-E shrink fit chuck. Designation: HSK-E shrink fit chuck, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

37 vörur

4923

Feather key

Feather key. Designation: Feather key, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"at

6 vörur

4611

MQL hydro expansion chuck for manual tool change cylce HSK-A

MQL hydro expansion chuck for manual tool change cylce HSK-A. Designation: MQL hydro expansion chuck for manual tool change cylce HSK-A, Internal diameter:

119 vörur

4924

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

112 vörur

4508

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 vörur

4623

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Diameter range: 20, Internal diameter: 3.40 mm, TABLE_INFO_PASSON: [{"attr":"P","v

83 vörur

4210

MQL hydro expansion chuck for automatic tool change cycle HSK-A

MQL hydro expansion chuck for automatic tool change cycle HSK-A. Designation: MQL hydro expansion chuck for automatic tool change cycle HSK-A, Internal dia

46 vörur

4221

MAS/BT hydro expansion chuck with increased clamping force

MAS/BT hydro expansion chuck with increased clamping force. Designation: MAS/BT hydro expansion chuck with increased clamping force, Internal diameter: 20.

25 vörur

4549

Extension HSK-A / HSK-C

Extension HSK-A / HSK-C. Designation: Extension HSK-A / HSK-C, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

10 vörur

4216

Hydraulic chuck

Hydraulic chuck. Designation: Hydraulic chuck, Internal diameter: 6.35 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

34 vörur

4614

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 16.

200 vörur

4981

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 273.00 mm, EAN: 4049844495418, Standard: Company std.

1 vörur

4988

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 200.00 mm, EAN: 4049844300897, Standard: Company std., Form: E

1 vörur

4966

Torque wrench set

Torque wrench set. Designation: Torque wrench set, EAN: 4049844227118, Standard: Company std.

2 vörur

4987

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 100.00 mm, EAN: 4049844300903

1 vörur

4989

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 514.00 mm, EAN: 4049844300873, Standard: Company std.

2 vörur

4972

Mounting adapter

Mounting adapter. Designation: Mounting adapter, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

3 vörur

4990

Tool setting fixture

Tool setting fixture. Designation: Tool setting fixture, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

8 vörur

4983

HSK-A blanks

HSK-A blanks. Designation: HSK-A blanks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

7 vörur

4982

HSK-C blanks

HSK-C blanks. Designation: HSK-C blanks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

9 vörur

6126

Indexable insert base

Indexable insert base. Designation: Indexable insert base, Total length: 15.53 mm, EAN: 4031093393201

12 vörur

3168

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

3177

Slot drill GA 200 A (3-fluted)

Slot drill GA 200 A (3-fluted). Designation: Slot drill GA 200 A (3-fluted), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

6 vörur

3086

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.590 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

8 vörur

3171

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 vörur

3192

Hard profile cutter with Torus grind GF 300 T

Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 4.763 mm – 15.875 mm, TABLE_INFO

6 vörur

3149

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 vörur

19955

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 vörur

3088

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

19954

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

19953

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 vörur

3173

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 vörur

3170

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

3172

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 vörur

3087

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 vörur

3148

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 vörur

3147

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 vörur

3092

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 vörur

19958

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 vörur

3169

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 vörur

19952

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

3146

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 vörur

4240

MAS/BT NC drilling chuck with internal cooling

MAS/BT NC drilling chuck with internal cooling. Designation: MAS/BT NC drilling chuck with internal cooling, Diameter range: 1.0 - 16, TABLE_INFO_PASSON: [

3 vörur

4087

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

2 vörur

4233

Whistle Notch side lock holder MAS/BT

Whistle Notch side lock holder MAS/BT. Designation: Whistle Notch side lock holder MAS/BT, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val

20 vörur

4346

HSK-A NC drilling chuck with internal cooling

HSK-A NC drilling chuck with internal cooling. Designation: HSK-A NC drilling chuck with internal cooling, Diameter range: 1.0 - 16, TABLE_INFO_PASSON: [{"

4 vörur

4242

ISO taper NC drilling chuck with internal cooling

ISO taper NC drilling chuck with internal cooling. Designation: ISO taper NC drilling chuck with internal cooling, Diameter range: 1.0 - 16, TABLE_INFO_PAS

2 vörur

4317

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

31 vörur

4329

Weldon side lock holders HSK-A

Weldon side lock holders HSK-A. Designation: Weldon side lock holders HSK-A, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

58 vörur

4232

Weldon side lock holders HSK-A

Weldon side lock holders HSK-A. Designation: Weldon side lock holders HSK-A, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

58 vörur

4322

Whistle Notch side lock holders ISO taper

Whistle Notch side lock holders ISO taper. Designation: Whistle Notch side lock holders ISO taper, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr"

20 vörur

4334

Whistle Notch side lock holders HSK-A

Whistle Notch side lock holders HSK-A. Designation: Whistle Notch side lock holders HSK-A, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","va

48 vörur

4234

Weldon side lock holders MAS/BT

Weldon side lock holders MAS/BT. Designation: Weldon side lock holders MAS/BT, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

29 vörur

4497

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

80 vörur

4333

Whistle Notch side lock holders HSK-C

Whistle Notch side lock holders HSK-C. Designation: Whistle Notch side lock holders HSK-C, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","va

29 vörur

5496

PCD slot drill (3-fluted)

PCD slot drill (3-fluted). Designation: PCD slot drill (3-fluted), Diameter range: 14.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

8 vörur

5493

PCD slot drill (2-fluted)

PCD slot drill (2-fluted). Designation: PCD slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

19 vörur

4824

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

88 vörur

4853

Whistle Notch side lock holders ISO taper

Whistle Notch side lock holders ISO taper. Designation: Whistle Notch side lock holders ISO taper, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr"

30 vörur

6843

Hard profile cutter GF 300 T

Hard profile cutter GF 300 T. Designation: Hard profile cutter GF 300 T, Diameter range: 4.763 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

10 vörur

4745

HSK holder

HSK holder. Designation: HSK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

6 vörur

4761

HSK holder

HSK holder. Designation: HSK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

6 vörur

4763

Swivel compartments

Swivel compartments. Designation: Swivel compartments, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

Mounting key for parting off blade. Designation: Mounting key for parting off blade, Total length: 120.00 mm, EAN: 4049844372719, Standard: Company std.

1 vörur

25922

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 58.00 mm, EAN: 4049844372702, Standard: Company std.

1 vörur

25904

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 90.60 mm, EAN: 4049844209961, Standard: Company std.

2 vörur

25900

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

1 vörur

3003

Milling arbor

Milling arbor. Designation: Milling arbor, Diameter range: 63.000 mm – 250.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},

2 vörur

28901

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 70.00 mm, EAN: 4049844933378, Standard: Company std.

4 vörur

3002

Milling arbor

Milling arbor. Designation: Milling arbor, Diameter range: 100.000 mm – 250.000 mm, Internal diameter: 40.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

5 vörur

4099

Extraction key for reduction bushes

Extraction key for reduction bushes. Designation: Extraction key for reduction bushes, EAN: 4031093736732, Standard: Company std.

1 vörur

4060

Threaded pin

Threaded pin. Designation: Threaded pin, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

2 vörur

4573

Retaining nut

Retaining nut. Designation: Retaining nut, Diameter range: 1.0 - 7.0, Total length: 16.20 mm, EAN: 4049844478770, Standard: Company std.

1 vörur

4744

SK holder

SK holder. Designation: SK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

3 vörur

4747

SpeedCooler cooling system

SpeedCooler cooling system. Designation: SpeedCooler cooling system, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

3 vörur

4762

SK holder

SK holder. Designation: SK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

3 vörur

4926

Pull stud SK

Pull stud SK. Designation: Pull stud SK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

3 vörur

4927

Pull stud BT

Pull stud BT. Designation: Pull stud BT, Internal diameter: 8.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

7 vörur

4947

HSK cleaning cap

HSK cleaning cap. Designation: HSK cleaning cap, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

5 vörur

4925

Pull stud SK

Pull stud SK. Designation: Pull stud SK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

3 vörur

4774

Holder carriers

Holder carriers. Designation: Holder carriers, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

6 vörur

4916

Hexagon insert

Hexagon insert. Designation: Hexagon insert, Total length: 90.00 mm, EAN: 4031093391719, Standard: Company std., Form: A

16 vörur

4919

MQL adjusting screw

MQL adjusting screw. Designation: MQL adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

15 vörur

4917

Torx socket set

Torx socket set. Designation: Torx socket set, Total length: 25.00 mm, EAN: 4031093647816, Standard: Company std.

11 vörur

4928

Pull stud BT

Pull stud BT. Designation: Pull stud BT, Internal diameter: 2.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

8 vörur

4910

Socket

Socket. Designation: Socket, Total length: 60.00 mm, EAN: 4031093574693, Standard: Company std.

6 vörur

4912

Hexagon key

Hexagon key. Designation: Hexagon key, Total length: 125.00 mm, EAN: 4049844099357, Standard: Company std.

25 vörur

4937

MQL HSK-A adjusting screw

MQL HSK-A adjusting screw. Designation: MQL HSK-A adjusting screw, Diameter range: 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

34 vörur

4555

Threaded spindle

Threaded spindle. Designation: Threaded spindle, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

7 vörur

4911

Socket

Socket. Designation: Socket, Total length: 171.00 mm, Internal diameter: 14.00 mm, EAN: 4031093554312, Standard: Company std.

6 vörur

4932

Ejector for MQL clamping sets

Ejector for MQL clamping sets. Designation: Ejector for MQL clamping sets, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

12 vörur

4909

Socket

Socket. Designation: Socket, Total length: 280.00 mm, EAN: 4031093391443, Standard: DIN 6368

7 vörur

4306

Retaining nut

Retaining nut. Designation: Retaining nut, Total length: 24.00 mm, EAN: 4031093659550, Standard: DIN ISO 15488, Form: D

32 vörur

4960

Torx Plus interchangeable blade

Torx Plus interchangeable blade. Designation: Torx Plus interchangeable blade, Total length: 175.00 mm, EAN: 4049844225275, Standard: Company std.

5 vörur

4994

Roller spanner for precision collet holders

Roller spanner for precision collet holders. Designation: Roller spanner for precision collet holders, Total length: 185.00 mm, Internal diameter: 16.00 mm

1 vörur

4995

Roller spanner insert for torque wrench

Roller spanner insert for torque wrench. Designation: Roller spanner insert for torque wrench, Total length: 45.00 mm, Internal diameter: 16.00 mm, EAN: 40

1 vörur

4992

Taper insert

Taper insert. Designation: Taper insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

7 vörur

6009

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 3.3 - 11.8, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

1 vörur

6153

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 31.500 mm – 31.500 mm, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

8 vörur

25909

Locking screw for parting off blade

Locking screw for parting off blade. Designation: Locking screw for parting off blade, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 vörur

4102

DIN 6798

Round shank holder, clamping screw above, four clamping surfaces. Designation: Round shank holder, clamping screw above, four clamping surfaces, TABLE_INFO

8 vörur

1257

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

1 vörur

1003

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 vörur

1085

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

5 vörur

1271

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

1067

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 vörur

1082

Tap with coolant ducts for UNF threads

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

10 vörur

1064

Machine tap for UNJF-threads

Machine tap for UNJF-threads. Designation: Machine tap for UNJF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 vörur

1272

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

1071

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

6 vörur

1256

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

5 vörur

1267

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

4 vörur

1060

Machine tap for UNJF-threads

Machine tap for UNJF-threads. Designation: Machine tap for UNJF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 vörur

1156

VBMX indexable insert

VBMX indexable insert. Designation: VBMX indexable insert, Diameter range: 12.001 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

2 vörur

1002

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 vörur

1258

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

8 vörur

1201

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 vörur

1255

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 vörur

1270

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

1058

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 vörur

1266

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 vörur

1059

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 vörur

1063

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 vörur

1098

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

4 vörur

1061

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 vörur

1066

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

7 vörur

1004

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

8 vörur

1269

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

7 vörur

1273

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

12 vörur

1068

Machine tap for UNJF-threads

Machine tap for UNJF-threads. Designation: Machine tap for UNJF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 vörur

1062

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 vörur

1268

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

3 vörur

1057

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 vörur

1100

Machine tap for ISO metric fine threads

1 vörur

1722

Fluteless machine tap for ISO metric fine threads

2 vörur

1597

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 vörur

1723

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

8 vörur

1926

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

2 vörur

1720

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

1286

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 vörur

1285

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 vörur

1732

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 vörur

1710

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

1 vörur

1347

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 vörur

1568

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 vörur

1713

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

1 vörur

1284

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

2 vörur

1289

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 vörur

1718

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

1712

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

5 vörur

1716

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 vörur

1715

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 vörur

1818

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

7 vörur

1719

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

1599

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 vörur

1727

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 vörur

1569

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 vörur

1596

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 vörur

1708

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 vörur

1707

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 vörur

1595

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 vörur

1288

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 vörur

1580

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

6 vörur

1821

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

9 vörur

1820

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

9 vörur

1565

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 vörur

1721

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 vörur

1287

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 vörur

1567

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 vörur

1717

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

1292

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 vörur

1691

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

6 vörur

1819

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

8 vörur

1725

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 vörur

1577

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

1726

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

5 vörur

1291

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 vörur

25910

Locking screw for tool holder

Locking screw for tool holder. Designation: Locking screw for tool holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 vörur

25908

Locking screw for parting off blade

Locking screw for parting off blade. Designation: Locking screw for parting off blade, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 vörur

2904

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

5 vörur

2902

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 vörur

2918

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

7 vörur

28400

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 vörur

3079

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

17 vörur

2917

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

9 vörur

2923

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 vörur

2920

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 vörur

2900

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 vörur

2919

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

7 vörur

2906

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

6 vörur

323

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

4 vörur

3908

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 vörur

3996

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 vörur

375

Twist drill with coolant duct, flute length DIN 1870

Twist drill with coolant duct, flute length DIN 1870. Designation: Twist drill with coolant duct, flute length DIN 1870, Diameter range: 11.110 mm – 34.130

18 vörur

342

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 vörur

3911

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 vörur

3999

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 vörur

3907

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 vörur

339

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 vörur

333

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

7 vörur

4070

PCD HSC face milling cutter

PCD HSC face milling cutter. Designation: PCD HSC face milling cutter, Diameter range: 32.000 mm – 80.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

5 vörur

3997

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 vörur

3910

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 vörur

322

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 vörur

3994

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 vörur

371

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 11.000 mm – 26.990 mm,

19 vörur

3906

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

12 vörur

3993

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 vörur

4071

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

26 vörur

3995

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 vörur

376

Twist drill with coolant duct, flute length DIN 1870

Twist drill with coolant duct, flute length DIN 1870. Designation: Twist drill with coolant duct, flute length DIN 1870, Diameter range: 13.000 mm – 29.000

6 vörur

4059

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

6 vörur

3909

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

12 vörur

370

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 11.000 mm – 34.920 mm,

32 vörur

338

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 vörur

3992

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 vörur

3998

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 vörur

4380

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

4379

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

4207

Washer

Washer. Designation: Washer, Total length: 2.00 mm, EAN: 4049844229761, Standard: Company std.

1 vörur

4388

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 vörur

4777

Guide ring

Guide ring. Designation: Guide ring, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

1 vörur

4373

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

5 vörur

4776

Guide ring

Guide ring. Designation: Guide ring, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

2 vörur

4376

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 vörur

4124

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 vörur

4375

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 vörur

4484

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

9 vörur

4879

Torx Plus bit insert

Torx Plus bit insert. Designation: Torx Plus bit insert, Total length: 25.00 mm, EAN: 4049844710856, Standard: Company std.

5 vörur

4492

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

13 vörur

4493

Fluteless machine tap for BSP-threads

Fluteless machine tap for BSP-threads. Designation: Fluteless machine tap for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 vörur

4161

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

9 vörur

4646

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 vörur

4121

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 vörur

4491

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

13 vörur

4488

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 vörur

4486

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

9 vörur

4485

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

8 vörur

4575

ER precision collet

ER precision collet. Designation: ER precision collet, Diameter range: 3.0 - 2.5, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

4 vörur

4389

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 vörur

4143

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

9 vörur

4374

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

5 vörur

4574

ER precision collet

ER precision collet. Designation: ER precision collet, Internal diameter: 6.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

13 vörur

4437

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 vörur

4320

HSK-A morse taper holder

HSK-A morse taper holder. Designation: HSK-A morse taper holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{

16 vörur

4391

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 vörur

4467

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 vörur

4953

Lock ring

Lock ring. Designation: Lock ring, Internal diameter: 125.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{

14 vörur

4382

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

4466

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 vörur

4446

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 vörur

4635

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 vörur

4394

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 vörur

4377

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

18 vörur

4159

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K"

5 vörur

4166

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

2 vörur

4378

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

18 vörur

4908

Milling cutter retaining screw

Milling cutter retaining screw. Designation: Milling cutter retaining screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

7 vörur

4383

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

4175

ER collet holder

ER collet holder. Designation: ER collet holder, Diameter range: 8.00 - 7.50, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

25 vörur

4651

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 vörur

4941

Length adjusting screw for conventional cooling

Length adjusting screw for conventional cooling. Designation: Length adjusting screw for conventional cooling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

16 vörur

4607

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

4 vörur

4425

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

4469

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 vörur

4431

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

4125

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 vörur

4120

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 vörur

4650

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 vörur

4935

Fastening screw

Fastening screw. Designation: Fastening screw, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","

13 vörur

4238

ISO taper morse taper holder

ISO taper morse taper holder. Designation: ISO taper morse taper holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

9 vörur

4104

Locking washer

Locking washer. Designation: Locking washer, Total length: 1.80 mm, Internal diameter: 4.40 mm, EAN: 4031093745741, Standard: Company std.

4 vörur

4495

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

9 vörur

4494

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 vörur

4145

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

7 vörur

4483

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

8 vörur

4456

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

4468

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 vörur

4647

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 vörur

4487

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

23 vörur

4430

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

4634

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 vörur

4921

Hexagon-socket offset screw keys

Hexagon-socket offset screw keys. Designation: Hexagon-socket offset screw keys, Total length: 41.30 mm, EAN: 4031093648868

11 vörur

4621

MQL HSK-A adjusting screw

MQL HSK-A adjusting screw. Designation: MQL HSK-A adjusting screw, Internal diameter: 4.10 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

71 vörur

4307

ER collet holder

ER collet holder. Designation: ER collet holder, Diameter range: 19.0 - 18.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

97 vörur

4436

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 vörur

4683

Machine tap for Rc (BSPT) threads

Machine tap for Rc (BSPT) threads. Designation: Machine tap for Rc (BSPT) threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"a

6 vörur

4458

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 vörur

4308

ER thread tap collet chuck

ER thread tap collet chuck. Designation: ER thread tap collet chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

48 vörur

4933

Fastening screw

Fastening screw. Designation: Fastening screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

13 vörur

4123

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 vörur

4122

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 vörur

4440

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 vörur

4489

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

33 vörur

4775

Guide ring

Guide ring. Designation: Guide ring, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

4 vörur

4993

Plug insert

Plug insert. Designation: Plug insert, Total length: 1.00 mm, EAN: 4031093567183, Standard: Company std.

3 vörur

4985

HSK-C sealing plug

HSK-C sealing plug. Designation: HSK-C sealing plug, Total length: 66.00 mm, Shank length: 50.00 mm, EAN: 4031093566742, Standard: Company std., Type of ma

6 vörur

4961

Pressure ball screw

Pressure ball screw. Designation: Pressure ball screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

8 vörur

515

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

208 vörur

5497

Machine tap for UN-threads set

Machine tap for UN-threads set. Designation: Machine tap for UN-threads set, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

1 vörur

5521

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

119 vörur

530

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

203 vörur

5522

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

119 vörur

5559

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 vörur

5567

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 vörur

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 vörur

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 vörur

6127

Threaded ring

Threaded ring. Designation: Threaded ring, Diameter range: 5.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"

3 vörur

5722

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 vörur

6128

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

27 vörur

5740

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

15 vörur

5766

Sealing plug

Sealing plug. Designation: Sealing plug, Diameter range: 13.0 - 20.0, Total length: 37.00 mm, Shank length: 20.00 mm, EAN: 4049844349605, Standard: Company

36 vörur

6007

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSO

170 vörur

5751

Moulded steady rest bushing for two-fluted drills

Moulded steady rest bushing for two-fluted drills. Designation: Moulded steady rest bushing for two-fluted drills, Diameter range: 11.980 - 12.499, TABLE_I

84 vörur

5747

Drill bush

Drill bush. Designation: Drill bush, Diameter range: 0.900 mm – 40.000 mm, Nominal diameter: 5.30 mm, Total length: 16.00 mm, Internal diameter: 5.30 mm, E

156 vörur

5749

Steady rest bushing for single and two-fluted drills

Steady rest bushing for single and two-fluted drills. Designation: Steady rest bushing for single and two-fluted drills, Diameter range: 4.750 - 4.999, Int

180 vörur

5750

Moulded steady rest bushing for single-fluted gun drills

Moulded steady rest bushing for single-fluted gun drills. Designation: Moulded steady rest bushing for single-fluted gun drills, Diameter range: 5.500 - 5.

158 vörur

6396

TCHT indexable insert

6 vörur

6393

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 vörur

6360

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 vörur

6370

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 vörur

6358

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 vörur

6345

TCHT indexable insert

11 vörur

6398

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 vörur

6391

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

6320

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 vörur

6338

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

6323

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 vörur

6381

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 vörur

6349

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 vörur

6319

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 vörur

6346

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 vörur

6359

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 vörur

6365

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 vörur

6355

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

11 vörur

6336

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 vörur

6339

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

6369

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 vörur

6385

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 vörur

6375

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 vörur

6341

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

6390

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

6327

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

6325

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 vörur

6354

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

11 vörur

6625

SCHT indexable insert

11 vörur

6606

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

6655

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"parti

7 vörur

6611

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 vörur

6640

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 vörur

6622

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 vörur

6627

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 vörur

6647

SCHT indexable insert

7 vörur

6646

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 vörur

6660

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"parti

11 vörur

6628

SCHT indexable insert

11 vörur

6597

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

6616

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 vörur

6633

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 vörur

6617

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 vörur

6657

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 vörur

6642

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 vörur

6599

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

7466

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 vörur

7718

VBMW indexable insert

VBMW indexable insert. Designation: VBMW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 vörur

7715

RNGN indexable insert

2 vörur

7467

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 vörur

7735

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 vörur

7472

TNGN indexable insert

TNGN indexable insert. Designation: TNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 vörur

7839

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 vörur

7721

VBMW indexable insert

VBMW indexable insert. Designation: VBMW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 vörur

7675

SCGW indexable insert

SCGW indexable insert. Designation: SCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

7 vörur

7455

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 vörur

7471

TNGN indexable insert

TNGN indexable insert. Designation: TNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 vörur

6907

SNHQ indexable insert

SNHQ indexable insert. Designation: SNHQ indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 vörur

7844

SCGT indexable insert with chip breaker

SCGT indexable insert with chip breaker. Designation: SCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 vörur

7838

SCGT indexable insert

4 vörur

7676

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 vörur

7816

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 vörur

7814

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 vörur

7480

HCXX indexable insert

HCXX indexable insert. Designation: HCXX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"

3 vörur

7478

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

5 vörur

760

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

5 vörur

7824

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

6909

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 vörur

7788

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

9 vörur

7827

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 vörur

7452

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 vörur

7820

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

7716

SCGN indexable insert

SCGN indexable insert. Designation: SCGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 vörur

7445

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 vörur

7450

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 vörur

7823

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 vörur

7845

SCGT indexable insert with chip breaker

SCGT indexable insert with chip breaker. Designation: SCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 vörur

7784

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

9 vörur

7807

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

7842

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 vörur

7663

TPGW indexable insert

TPGW indexable insert. Designation: TPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

9 vörur

757

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 vörur

7815

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 vörur

7787

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 vörur

753

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 vörur

7709

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 vörur

764

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

8 vörur

7723

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 vörur

6908

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 vörur

7782

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

9 vörur

7821

VBGW indexable insert

7 vörur

7804

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 vörur

7846

SCGT indexable insert with chip breaker

SCGT indexable insert with chip breaker. Designation: SCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 vörur

763

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 vörur

7453

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 vörur

7837

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 vörur

7786

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 vörur

6910

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 vörur

7810

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 vörur

7448

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 vörur

952

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

2 vörur

879

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 vörur

909

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 vörur

872

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

935

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 vörur

874

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

5 vörur

887

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

5 vörur

877

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 vörur

938

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

1 vörur

936

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

8 vörur

880

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 vörur

875

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

910

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 vörur

903

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

939

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K"

4 vörur

4318

SK collet holder

SK collet holder. Designation: SK collet holder, Diameter range: 2.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

11 vörur

4827

SK collet holder

SK collet holder. Designation: SK collet holder, Diameter range: 0.5 - 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

27 vörur

3156

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

3099

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 9.525 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val

4 vörur

3097

High-performance roughing end mill RS 100 U

High-performance roughing end mill RS 100 U. Designation: High-performance roughing end mill RS 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PAS

7 vörur

3100

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 9.525 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

5 vörur

3188

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"at

7 vörur

3183

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P",

6 vörur

3078

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

7 vörur

3081

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 vörur

3184

Roughing end mill GS 100 A (coarse teeth)

Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON:

7 vörur

3167

End mill with corner radius (4-fluted)

End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"at

9 vörur

3090

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 6.350 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 vörur

3115

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 7.938 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":

6 vörur

3114

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.175 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 vörur

6484

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

10 vörur

3095

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

7 vörur

3152

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

3091

Multi-tooth end mill with corner radius GH 100 U

Multi-tooth end mill with corner radius GH 100 U. Designation: Multi-tooth end mill with corner radius GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABL

20 vörur

3322

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 vörur

6485

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

11 vörur

3093

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

3153

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

34 vörur

3155

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

9 vörur

3186

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"at

7 vörur

3182

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P",

6 vörur

3150

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

34 vörur

3190

Hard roughing end mill GS 100 H (fine teeth)

Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_P

6 vörur

3098

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PAS

7 vörur

3096

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 vörur

3178

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

3082

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

3179

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

3080

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

13 vörur

3077

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 vörur

3180

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 vörur

19957

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

3189

Hard roughing end mill GS 100 H (fine teeth)

Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_P

6 vörur

3340

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":

17 vörur

3089

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

17 vörur

3113

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 vörur

19960

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 vörur

19956

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

3164

End mill with corner radius (4-fluted)

End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"at

9 vörur

19959

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

3181

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 vörur

4257

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 vörur

4265

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

10 vörur

4260

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 vörur

4251

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 vörur

4264

Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 vörur

4253

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 12.700 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","va

4 vörur

4259

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 vörur

3705

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 vörur

3432

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 16.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

5 vörur

4258

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 vörur

4256

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

4261

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

4255

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PAS

9 vörur

4266

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 vörur

4263

Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 vörur

4252

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 vörur

3876

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

17 vörur

4250

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 vörur

4254

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PAS

10 vörur

4262

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 vörur

3429

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 vörur

7649

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 vörur

7644

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 vörur

6840

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P",

6 vörur

6891

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

6898

Ratio milling cutter RS 100 U

Ratio milling cutter RS 100 U. Designation: Ratio milling cutter RS 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

6998

Ratio end mill RF 100 7 Speed

Ratio end mill RF 100 7 Speed. Designation: Ratio end mill RF 100 7 Speed, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

4310

ER collet holder

ER collet holder. Designation: ER collet holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

7 vörur

6897

Ratio milling cutter RS 100 F

Ratio milling cutter RS 100 F. Designation: Ratio milling cutter RS 100 F, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

4435

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

1 vörur

6776

Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 vörur

6990

Ratio end mill RF 100 5 Speed

9 vörur

6774

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

6892

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

6775

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

Ratio end mill RF 100 7 Speed. Designation: Ratio end mill RF 100 7 Speed, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

29 vörur

6462

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"

10 vörur

4326

Synchro tapping chuck with straight shank

Synchro tapping chuck with straight shank. Designation: Synchro tapping chuck with straight shank, Diameter range: 4.0 - 20.0, TABLE_INFO_PASSON: [{"attr":

2 vörur

4342

Quick change tapping chuck

Quick change tapping chuck. Designation: Quick change tapping chuck, Diameter range: M3 - M12, Internal diameter: 31.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

2 vörur

4340

Quick change tapping chuck

Quick change tapping chuck. Designation: Quick change tapping chuck, Diameter range: M3 - M12, Internal diameter: 31.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

2 vörur

1083

Twist drill set AeroX

Twist drill set AeroX. Designation: Twist drill set AeroX, Diameter range: 1.0 - 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

3 vörur

3145

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

5 vörur

3144

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 vörur

3142

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 vörur

3143

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 vörur

3452

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 vörur

3836

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

3458

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

26 vörur

3453

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

3460

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

3459

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 vörur

3694

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 vörur

3456

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 26.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

24 vörur

1199

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

118 vörur

1259

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

107 vörur

1146

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.400 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

129 vörur

3504

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 125.000 mm, Internal diameter: 22.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 vörur

3176

Quadrant milling cutter

Quadrant milling cutter. Designation: Quadrant milling cutter, Diameter range: 10.000 mm – 56.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr"

11 vörur

3342

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

12 vörur

3346

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

20 vörur

3343

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

20 vörur

3347

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

15 vörur

3433

End mill

End mill. Designation: End mill, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 vörur

3431

End mill

End mill. Designation: End mill, Diameter range: 3.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

20 vörur

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

2 vörur

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"a

5 vörur

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 6.0 - 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

5 vörur

3530

Side and face cutters

Side and face cutters. Designation: Side and face cutters, Diameter range: 50.000 mm – 200.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr"

35 vörur

3579

Woodruff cutter

Woodruff cutter. Designation: Woodruff cutter, Diameter range: 4.500 mm – 45.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

21 vörur

3580

Woodruff cutter

Woodruff cutter. Designation: Woodruff cutter, Diameter range: 4.500 mm – 45.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

24 vörur

3700

End mill

End mill. Designation: End mill, Diameter range: 10.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val"

9 vörur

1131

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

44 vörur

1132

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

40 vörur

4105

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 30.00 - 31.99, TABLE_INFO_PASS

28 vörur

4106

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 vörur

4110

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

84 vörur

4107

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 vörur

4109

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

87 vörur

4108

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 vörur

5242

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 34.51 - 37.50, TABLE_INFO_PASS

28 vörur

5243

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 37.51 - 40.50, TABLE_INFO_PASS

28 vörur

5248

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 20.01 - 21.00, TABLE_INFO_PASS

28 vörur

4208

HPC extension

HPC extension. Designation: HPC extension, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

5 vörur

2016

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 vörur

2014

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 vörur

1261

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

1 vörur

1135

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

9 vörur

2045

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

20 vörur

1134

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

9 vörur

129

Twist drill with shank dia. 25.4 mm

Twist drill with shank dia. 25.4 mm. Designation: Twist drill with shank dia. 25.4 mm, Diameter range: 25.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"

15 vörur

128

Twist drill with shank dia. 16.0 mm

Twist drill with shank dia. 16.0 mm. Designation: Twist drill with shank dia. 16.0 mm, Diameter range: 16.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"

29 vörur

1263

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"

9 vörur

1224

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 30.160 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"att

28 vörur

1221

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

102 vörur

1223

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

106 vörur

1222

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 30.160 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

22 vörur

136

Twist drill with shank dia. 25.4 mm

Twist drill with shank dia. 25.4 mm. Designation: Twist drill with shank dia. 25.4 mm, Diameter range: 25.000 mm – 39.000 mm, TABLE_INFO_PASSON: [{"attr":"

9 vörur

2047

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

97 vörur

2048

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

90 vörur

2458

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.400 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

149 vörur

2997

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

106 vörur

374

Twist drill with coolant duct, flute length DIN 1870

Twist drill with coolant duct, flute length DIN 1870. Designation: Twist drill with coolant duct, flute length DIN 1870, Diameter range: 11.000 mm – 34.000

23 vörur

351

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 31.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"

10 vörur

3570

T-slot end mill

T-slot end mill. Designation: T-slot end mill, Diameter range: 12.500 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

9 vörur

363

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 7.000 mm – 46.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

56 vörur

336

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

209 vörur

330

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.450 mm – 35.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

173 vörur

620

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 9.520 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

36 vörur

608

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 9.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val

68 vörur

621

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 9.520 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

24 vörur

610

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

192 vörur

571

Extra length twist drill, series 3

Extra length twist drill, series 3. Designation: Extra length twist drill, series 3, Diameter range: 2.500 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

65 vörur

6034

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

111 vörur

572

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

104 vörur

622

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

262 vörur

661

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 7.940 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

34 vörur

663

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 10.500 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val"

22 vörur

658

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

209 vörur

659

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.500 mm – 15.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

218 vörur

9672

Extra length twist drill, series 3

Extra length twist drill, series 3. Designation: Extra length twist drill, series 3, Diameter range: 2.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

19 vörur

9670

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

54 vörur

9000

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

61 vörur

3134

End mills with ISO taper

End mills with ISO taper. Designation: End mills with ISO taper, Diameter range: 32.000 mm – 80.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"att

3 vörur

3120

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 16.000 mm – 63.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

18 vörur

3130

End mills with ISO taper

End mills with ISO taper. Designation: End mills with ISO taper, Diameter range: 32.000 mm – 80.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"att

2 vörur

3121

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 16.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

9 vörur

3118

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 10.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

12 vörur

3117

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 10.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

14 vörur

3440

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 13.000 mm – 45.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

13 vörur

6118

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 4.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 vörur

6117

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 4.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 vörur

239

DIN 338

DIN 338. Total length: 49.00 mm, Shank diameter: 1.94 mm, EAN: 4031093422147

342 vörur

3663

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 vörur

3695

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 vörur

3664

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

24 vörur

3651

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

23 vörur

3451

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 vörur

417

Replacement blades for hand reamers

Replacement blades for hand reamers. Designation: Replacement blades for hand reamers, Diameter range: 24.00 - 27.50, TABLE_INFO_PASSON: [{"attr":"P","val"

20 vörur

4524

MQL synchro tapping chuck with straight shanks

MQL synchro tapping chuck with straight shanks. Designation: MQL synchro tapping chuck with straight shanks, Diameter range: 6.0 - 16.0, Internal diameter:

2 vörur

5492

PCD slot drill (2-fluted)

PCD slot drill (2-fluted). Designation: PCD slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

17 vörur

5495

PCD slot drill (3-fluted)

PCD slot drill (3-fluted). Designation: PCD slot drill (3-fluted), Diameter range: 14.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

8 vörur

3535

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 vörur

3537

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 vörur

234

Twist drills-Set

108 vörur

892

Nut tap for ISO metric threads

Nut tap for ISO metric threads. Designation: Nut tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

108 vörur

2017

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 vörur

2015

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 vörur

1262

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 35.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"

63 vörur

1147

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.600 mm – 21.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

1136

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

9 vörur

1228

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

142 vörur

1133

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

2459

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

125 vörur

244

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 10.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

3 vörur

2498

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

105 vörur

221

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.450 mm – 17.100 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

41 vörur

250

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

243

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 8.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

4 vörur

2461

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

113 vörur

246

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 6.700 mm – 25.250 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

19 vörur

242

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

5 vörur

251

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 76.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

47 vörur

247

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 3.200 mm – 55.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

47 vörur

252

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

35 vörur

238

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

225

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 22.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

116 vörur

237

Extra length twist drill, series 3

Extra length twist drill, series 3. Designation: Extra length twist drill, series 3, Diameter range: 3.500 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

35 vörur

248

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 6.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

26 vörur

228

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 22.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

101 vörur

224

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.650 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

144 vörur

253

Twist drill with coolant duct, flute length to company standard

Twist drill with coolant duct, flute length to company standard. Designation: Twist drill with coolant duct, flute length to company standard, Diameter ran

38 vörur

229

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 8.000 mm – 59.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

44 vörur

249

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

2457

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

94 vörur

2460

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

109 vörur

255

Twist drill with coolant duct, flute length to company standard

Twist drill with coolant duct, flute length to company standard. Designation: Twist drill with coolant duct, flute length to company standard, Diameter ran

38 vörur

254

Twist drill with coolant duct, flute length to company standard

Twist drill with coolant duct, flute length to company standard. Designation: Twist drill with coolant duct, flute length to company standard, Diameter ran

46 vörur

227

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.750 mm – 29.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

92 vörur

240

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 18.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

76 vörur

269

Twist drill with coolant duct, short

Twist drill with coolant duct, short. Designation: Twist drill with coolant duct, short, Diameter range: 9.920 mm – 23.020 mm, TABLE_INFO_PASSON: [{"attr":

50 vörur

266

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 7.800 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

78 vörur

236

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 2.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

59 vörur

267

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 7.700 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

54 vörur

226

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.320 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

388 vörur

223

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.300 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

400 vörur

2462

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

59 vörur

235

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 1.600 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

116 vörur

245

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 2.000 mm – 101.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

400 vörur

268

Twist drill with shank dia. 12.7 mm

Twist drill with shank dia. 12.7 mm. Designation: Twist drill with shank dia. 12.7 mm, Diameter range: 13.000 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"

30 vörur

2456

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

126 vörur

305

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.200 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

400 vörur

308

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.320 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

205 vörur

270

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 10.000 mm – 49.000 mm,

40 vörur

299

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 14.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

4 vörur

298

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 14.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

4 vörur

293

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 14.000 mm – 45.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

19 vörur

272

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 10.000 mm – 49.000 mm,

22 vörur

271

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 10.000 mm – 47.000 mm,

58 vörur

317

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.500 mm – 29.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

183 vörur

3187

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 160.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

6 vörur

329

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.400 mm – 48.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

400 vörur

3185

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 125.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

6 vörur

396

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

94 vörur

3654

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 100.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

4 vörur

3749

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 100.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 vörur

345

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 3.000 mm – 67.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

152 vörur

379

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

380

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

378

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

390

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 3.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"at

25 vörur

5523

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

208 vörur

526

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 5.800 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P",

52 vörur

5520

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

208 vörur

5519

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

208 vörur

502

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 1.950 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

132 vörur

503

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

88 vörur

527

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 7.800 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

54 vörur

529

Extra length twist drill, series 3

Extra length twist drill, series 3. Designation: Extra length twist drill, series 3, Diameter range: 2.500 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

16 vörur

506

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.400 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

44 vörur

550

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

183 vörur

552

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

276 vörur

542

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 8.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

28 vörur

524

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 2.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P",

90 vörur

535

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

261 vörur

549

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

339 vörur

504

Extra length twist drill, series 3

Extra length twist drill, series 3. Designation: Extra length twist drill, series 3, Diameter range: 2.500 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

75 vörur

525

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 7.900 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

22 vörur

501

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 32.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

230 vörur

5537

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 vörur

566

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 8.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

19 vörur

565

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 6.000 mm – 17.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

15 vörur

5678

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 vörur

563

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 6.000 mm – 7.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M"

4 vörur

560

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 2.370 mm – 5.610 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"

75 vörur

567

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

16 vörur

562

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 2.400 mm – 5.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

17 vörur

553

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

247 vörur

5739

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

15 vörur

617

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 15.870 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

220 vörur

6008

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSO

161 vörur

619

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

44 vörur

618

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 2.700 mm – 11.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

70 vörur

605

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.200 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

353 vörur

629

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

100 vörur

6006

Twist drill with standard shank

Twist drill with standard shank. Designation: Twist drill with standard shank, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

161 vörur

5736

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

12 vörur

6005

Twist drill with standard shank

Twist drill with standard shank. Designation: Twist drill with standard shank, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

236 vörur

645

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 9.520 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

53 vörur

592

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 12.700 mm – 28.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

19 vörur

606

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 7.940 mm – 29.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

21 vörur

651

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.200 mm – 19.840 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

400 vörur

669

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 10.200 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

105 vörur

657

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.500 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

194 vörur

662

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 29.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"

24 vörur

655

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 4.200 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

42 vörur

670

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 1.980 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P",

60 vörur

665

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.300 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

63 vörur

671

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 2.300 mm – 8.500 mm, TABLE_INFO_PASSON: [{"attr":"P","

36 vörur

654

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 3.000 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

139 vörur

652

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

241 vörur

668

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

184 vörur

664

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.500 mm – 17.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

182 vörur

667

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.500 mm – 22.220 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

227 vörur

653

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.500 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

319 vörur

985

Set Hand taps for UNF-threads

Set Hand taps for UNF-threads. Designation: Set Hand taps for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

17 vörur

981

Set Hand taps for UNC-threads

Set Hand taps for UNC-threads. Designation: Set Hand taps for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

20 vörur

905

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

10 vörur

986

Hand tap for UNF-threads

Hand tap for UNF-threads. Designation: Hand tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

21 vörur

960

Hand tap for pipe threads

Hand tap for pipe threads. Designation: Hand tap for pipe threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"

13 vörur

9671

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

34 vörur

907

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

11 vörur

650

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

8 vörur

987

Hand tap for UNF-threads

Hand tap for UNF-threads. Designation: Hand tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

22 vörur

982

Hand tap for UNC-threads

Hand tap for UNC-threads. Designation: Hand tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

25 vörur

954

Set Hand taps for BSW-threads

Set Hand taps for BSW-threads. Designation: Set Hand taps for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

17 vörur

862

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

38 vörur

984

Hand tap for UNC-threads

Hand tap for UNC-threads. Designation: Hand tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

22 vörur

983

Hand tap for UNC-threads

Hand tap for UNC-threads. Designation: Hand tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

24 vörur

886

Hand tap for ISO metric fine threads

Hand tap for ISO metric fine threads. Designation: Hand tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

51 vörur

959

Hand tap for pipe threads

Hand tap for pipe threads. Designation: Hand tap for pipe threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"

12 vörur

882

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

14 vörur

864

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

34 vörur

885

Hand tap for ISO metric fine threads

Hand tap for ISO metric fine threads. Designation: Hand tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

55 vörur

958

Set Hand taps for BSP-threads

Set Hand taps for BSP-threads. Designation: Set Hand taps for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

13 vörur

861

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

33 vörur

906

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

12 vörur

883

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

14 vörur

884

Set Hand taps for ISO metric fine threads

Set Hand taps for ISO metric fine threads. Designation: Set Hand taps for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

51 vörur

9651

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

175 vörur

863

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

37 vörur

904

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

10 vörur

672

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.800 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

118 vörur

3670

End mill

End mill. Designation: End mill, Diameter range: 2.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

31 vörur

3669

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

19 vörur

3692

End mill

End mill. Designation: End mill, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

19 vörur

3698

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

12 vörur

3690

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

21 vörur

3428

End mill

End mill. Designation: End mill, Diameter range: 2.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

32 vörur

3706

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 16.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

5 vörur

3650

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

15 vörur

3668

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 vörur

3660

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":

17 vörur

6756

Roughing end mill GS 80 (fine teeth)

Roughing end mill GS 80 (fine teeth). Designation: Roughing end mill GS 80 (fine teeth), Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

13 vörur

511

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.300 mm – 17.460 mm, TABLE_INFO_PASSO

38 vörur

3550

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

1 vörur

3517

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 vörur

3519

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4138

Drill thread milling cutter for UNC-threads

Drill thread milling cutter for UNC-threads. Designation: Drill thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 vörur

3518

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 vörur

3516

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 vörur

433

Spot facer

Spot facer. Designation: Spot facer, Diameter range: 8.000 mm – 27.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

2 vörur

1280

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

1 vörur

1903

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 vörur

1909

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

1 vörur

1970

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

6 vörur

1925

Fluteless machine tap for ISO metric fine threads

1 vörur

1594

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

4 vörur

1900

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 vörur

1587

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 vörur

2008

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

6 vörur

1249

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 vörur

1277

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

2 vörur

1346

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

1 vörur

1584

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

1589

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

1991

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 vörur

1252

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

2013

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 vörur

1588

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

9 vörur

1276

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 vörur

1873

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

11 vörur

1978

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

5 vörur

1011

Machine tap for EG/STI threads

4 vörur

1871

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 vörur

1246

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 vörur

1872

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

14 vörur

1837

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

5 vörur

1979

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

11 vörur

1908

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

5 vörur

1895

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 vörur

1875

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 vörur

1977

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

11 vörur

196

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 vörur

1896

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 vörur

1001

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

12 vörur

1088

Machine tap for NPT-threads

Machine tap for NPT-threads. Designation: Machine tap for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 vörur

1971

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

26 vörur

8888

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

13 vörur

1339

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

7 vörur

1049

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 vörur

1586

Fluteless machine tap for BSP-threads

Fluteless machine tap for BSP-threads. Designation: Fluteless machine tap for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

6 vörur

1915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

1084

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 vörur

8889

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

13 vörur

1914

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

1275

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

5 vörur

1917

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 vörur

1981

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 vörur

1918

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 vörur

1591

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

1 vörur

1874

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

8 vörur

1876

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 vörur

2086

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 vörur

2087

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

13 vörur

2449

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

1 vörur

2447

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 vörur

2444

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 vörur

2445

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

2 vörur

2446

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

2511

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 vörur

2448

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

2 vörur

2508

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 vörur

2442

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

2427

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 vörur

2426

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

3 vörur

2512

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 vörur

2403

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 vörur

2425

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 vörur

2465

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 vörur

2443

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

2275

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

2440

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 vörur

2515

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 vörur

2466

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 vörur

2428

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 vörur

2509

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 vörur

2513

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 vörur

2424

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

19 vörur

2982

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

1 vörur

2868

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

10 vörur

2898

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 vörur

2854

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

3 vörur

2855

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

8 vörur

2881

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

9 vörur

2878

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

5 vörur

2852

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 vörur

2792

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

5 vörur

2791

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 vörur

2710

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 vörur

2889

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 vörur

2876

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 vörur

2891

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 vörur

2870

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

13 vörur

2983

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

6 vörur

2941

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 vörur

2894

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

8 vörur

2875

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K"

6 vörur

2790

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 vörur

2859

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

11 vörur

2895

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

5 vörur

2989

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 vörur

2887

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

10 vörur

2842

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

5 vörur

2874

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 vörur

2861

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

12 vörur

2986

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 vörur

2988

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 vörur

2990

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 vörur

2984

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 vörur

2998

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

5 vörur

2843

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

29 vörur

2985

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 vörur

2849

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

6 vörur

2999

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

7 vörur

2871

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

15 vörur

2864

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

17 vörur

2880

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

9 vörur

2942

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 vörur

2886

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

6 vörur

2850

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

273

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 vörur

2940

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

7 vörur

2858

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 vörur

2897

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

14 vörur

2862

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 vörur

2846

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 vörur

2981

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

1 vörur

2879

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

28 vörur

2872

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 vörur

2851

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

2860

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

10 vörur

2844

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

8 vörur

2888

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

39 vörur

2838

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

20 vörur

4441

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 vörur

4660

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

12 vörur

4657

Tap with coolant ducts for UNF threads

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

12 vörur

4661

Tap with coolant ducts for UNF threads

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

12 vörur

4439

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

1 vörur

4655

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 vörur

4672

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 vörur

4643

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 vörur

3977

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

21 vörur

4642

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 vörur

3902

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 vörur

3989

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 vörur

3935

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 vörur

4653

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 vörur

391

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 vörur

3985

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 vörur

3984

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 vörur

3964

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 vörur

3991

Machine tap for EG/STI threads

6 vörur

3972

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

12 vörur

4417

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 vörur

3973

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 vörur

4652

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 vörur

4158

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

7 vörur

3946

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 vörur

4656

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

12 vörur

4686

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 vörur

4156

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

7 vörur

3924

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 vörur

4433

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

4151

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 vörur

4685

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 vörur

3938

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

10 vörur

4392

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

17 vörur

3942

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

9 vörur

4571

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 vörur

4155

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 vörur

3950

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 vörur

3916

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 vörur

4424

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

4883

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 vörur

4423

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

4676

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

11 vörur

4412

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 vörur

4645

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 vörur

392

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 vörur

3961

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 vörur

4035

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

11 vörur

4428

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

3944

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

14 vörur

3981

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 vörur

3939

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 vörur

4036

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

11 vörur

3901

Machine tap for UNC-threads

14 vörur

4631

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 vörur

4640

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 vörur

3971

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 vörur

3914

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 vörur

3928

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 vörur

4860

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 vörur

3932

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 vörur

4415

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 vörur

4861

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

4 vörur

4152

Fluteless tap with coolant ducts for BSP threads

Fluteless tap with coolant ducts for BSP threads. Designation: Fluteless tap with coolant ducts for BSP threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 vörur

3975

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 vörur

4407

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

34 vörur

4627

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 vörur

4644

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 vörur

4429

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

4884

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 vörur

4625

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 vörur

4146

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 vörur

3945

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 vörur

4416

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

14 vörur

3917

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 vörur

4411

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 vörur

4886

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

31 vörur

4570

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 vörur

4406

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

25 vörur

4654

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 vörur

4887

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 vörur

4569

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 vörur

3915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 vörur

4413

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 vörur

4147

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 vörur

3979

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 vörur

4220

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

9 vörur

4641

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 vörur

3931

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 vörur

3900

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

3904

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 vörur

362

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 vörur

3912

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 vörur

4422

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

3937

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

10 vörur

3922

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 vörur

394

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

33 vörur

4639

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 vörur

4410

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

26 vörur

3930

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 vörur

3927

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 vörur

4331

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 vörur

3974

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 vörur

4633

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 vörur

4628

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 vörur

3967

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 vörur

3983

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 vörur

3988

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

8 vörur

4670

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 vörur

4677

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

11 vörur

3921

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 vörur

3934

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 vörur

4888

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 vörur

4659

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 vörur

4658

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 vörur

4219

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

33 vörur

4629

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 vörur

4404

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

28 vörur

4154

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 vörur

4153

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 vörur

3965

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 vörur

4638

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 vörur

4408

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

29 vörur

4671

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 vörur

4630

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 vörur

3920

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 vörur

3918

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 vörur

4402

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

39 vörur

3919

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 vörur

4418

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

4414

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

5570

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 vörur

5569

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 vörur

5568

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 vörur

5563

Machine tap for ISO metric threads

9 vörur

5596

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

9 vörur

5561

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 vörur

5564

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 vörur

5554

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 vörur

5557

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 vörur

5551

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 vörur

5595

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 vörur

5572

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 vörur

5558

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 vörur

5598

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

14 vörur

5552

Machine tap for ISO metric threads

10 vörur

5731

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

6 vörur

5733

Machine tap for ISO metric threads

6 vörur

5725

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

11 vörur

715

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

1 vörur

802

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

797

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 vörur

795

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 vörur

807

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 vörur

788

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 vörur

781

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

6 vörur

733

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 vörur

787

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

4 vörur

796

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 vörur

817

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 vörur

791

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 vörur

783

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 vörur

799

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 vörur

811

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

810

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

803

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 vörur

800

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 vörur

786

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

794

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 vörur

792

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

3 vörur

785

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 vörur

816

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

809

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

812

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

789

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

777

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 vörur

798

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 vörur

790

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 vörur

804

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

813

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 vörur

734

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 vörur

801

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 vörur

808

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 vörur

814

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 vörur

806

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 vörur

784

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

16 vörur

815

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

28 vörur

870

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 vörur

842

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

1 vörur

869

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

4 vörur

924

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 vörur

946

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 vörur

836

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 vörur

831

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

17 vörur

868

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 vörur

997

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 vörur

964

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

6 vörur

979

Machine tap for PG-threads

Machine tap for PG-threads. Designation: Machine tap for PG-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

9 vörur

867

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 vörur

920

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

9 vörur

965

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

8 vörur

860

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

14 vörur

912

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 vörur

876

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 vörur

950

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 vörur

980

Machine tap for PG-threads

Machine tap for PG-threads. Designation: Machine tap for PG-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

6 vörur

1069

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

5 vörur

850

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

9 vörur

853

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val"

13 vörur

911

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 vörur

947

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 vörur

871

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 vörur

844

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

889

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

12 vörur

922

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

840

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

1 vörur

992

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

819

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

15 vörur

854

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{

15 vörur

823

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

15 vörur

821

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 vörur

888

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 vörur

855

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{

15 vörur

908

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

17 vörur

856

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{

15 vörur

925

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

4 vörur

858

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

13 vörur

873

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

11 vörur

834

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

30 vörur

825

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 vörur

914

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

849

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 vörur

859

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

14 vörur

857

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

14 vörur

949

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 vörur

839

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

16 vörur

835

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 vörur

820

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

916

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 vörur

847

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 vörur

917

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 vörur

822

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 vörur

926

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

9 vörur

918

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

830

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

46 vörur

833

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

22 vörur

927

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

18 vörur

937

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

10 vörur

995

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 vörur

961

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"f

14 vörur

963

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

10 vörur

962

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

9 vörur

919

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

998

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 vörur

991

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

20 vörur

915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

31 vörur

973

Machine tap for NPT-threads

Machine tap for NPT-threads. Designation: Machine tap for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 vörur

827

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

49 vörur

828

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 vörur

866

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

6 vörur

923

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

15 vörur

967

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K"

7 vörur

890

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 vörur

930

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 vörur

837

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

829

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 vörur

826

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 vörur

843

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

9 vörur

928

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

6 vörur

931

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

12 vörur

846

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 vörur

948

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

20 vörur

838

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 vörur

865

Tap for ISO metric threads

Tap for ISO metric threads. Designation: Tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

3 vörur

824

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 vörur

845

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

13 vörur

945

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

18 vörur

932

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

16 vörur

913

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 vörur

966

Fluteless machine tap for BSP-threads

Fluteless machine tap for BSP-threads. Designation: Fluteless machine tap for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

7 vörur

993

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

13 vörur

832

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

47 vörur

929

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

8 vörur

848

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 vörur

968

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K"

12 vörur

818

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

25 vörur

996

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

10 vörur

921

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

15 vörur

184

Dies for UNF threads

Dies for UNF threads. Designation: Dies for UNF threads, Total length: 11.00 mm, EAN: 4031093009096, Cutting material: HSS, Surface: bright, Cutting direct

2 vörur

512

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.000 mm – 16.670 mm, TABLE_INFO_PASSO

45 vörur

1189

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 2.800 mm – 21.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

12 vörur

3854

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr

4 vörur

3855

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr

4 vörur

3849

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr

8 vörur

3866

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 4.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr

5 vörur

3853

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 2.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr"

5 vörur

3848

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr

7 vörur

4249

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr

8 vörur

710

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 2.700 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

61 vörur

1028

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.500 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 vörur

1020

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 vörur

1024

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.100 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

4 vörur

1243

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 5.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

96 vörur

1242

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

123 vörur

1025

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

124 vörur

1027

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 19.500 mm, TABLE_INFO_PAS

29 vörur

1798

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

1 vörur

1702

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","v

106 vörur

1452

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

163 vörur

1451

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

116 vörur

2520

Round indexable insert

Round indexable insert. Designation: Round indexable insert, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

6 vörur

26602

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

1 vörur

25650

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

2 vörur

25647

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

2 vörur

2474

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 5.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

75 vörur

25641

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

2 vörur

26601

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

2 vörur

26604

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

1 vörur

25648

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 vörur

25671

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

4 vörur

25638

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 vörur

2473

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

94 vörur

25677

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 vörur

25649

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 vörur

25621

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 vörur

25622

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 vörur

25636

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 vörur

25637

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 vörur

25668

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

4 vörur

25630

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 vörur

25674

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 vörur

25643

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

2 vörur

25639

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 vörur

25618

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 vörur

25665

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 vörur

25620

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 vörur

25670

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

4 vörur

25634

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 vörur

25659

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 vörur

25675

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 vörur

26603

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

1 vörur

25655

Indexable insert for external partial profile threading

11 vörur

25603

Indexable insert for radial grooving external and internal

Indexable insert for radial grooving external and internal. Designation: Indexable insert for radial grooving external and internal, TABLE_INFO_PASSON: [{"

15 vörur

25676

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 vörur

25615

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 vörur

25679

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

6 vörur

25629

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 vörur

25627

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 vörur

25607

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 vörur

25664

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 vörur

25673

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

4 vörur

25669

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

4 vörur

25628

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 vörur

25658

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 vörur

25667

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 vörur

25614

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 vörur

25666

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 vörur

25602

Indexable insert for radial grooving external and internal

Indexable insert for radial grooving external and internal. Designation: Indexable insert for radial grooving external and internal, TABLE_INFO_PASSON: [{"

15 vörur

25672

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

4 vörur

25656

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 vörur

25613

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 vörur

25623

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 vörur

25646

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

2 vörur

25631

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 vörur

25619

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 vörur

25626

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 vörur

25657

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 vörur

25651

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

2 vörur

25678

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

6 vörur

25605

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 vörur

25718

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

36 vörur

25662

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 vörur

5029

Indexable insert for single-fluted gun drill EB 800

Indexable insert for single-fluted gun drill EB 800. Designation: Indexable insert for single-fluted gun drill EB 800, Diameter range: 25.000 - 25.499, TAB

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

132 vörur

1032

Step ratio drill, 3-fluted

Step ratio drill, 3-fluted. Designation: Step ratio drill, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

14 vörur

3303

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 vörur

3709

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 vörur

3860

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 2.000 mm – 8.000 mm, TABLE_INFO_PA

5 vörur

3686

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

22 vörur

4269

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_P

24 vörur

3859

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_P

7 vörur

3677

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 vörur

3684

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 0.300 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

32 vörur

19963

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 vörur

3203

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

25 vörur

3676

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 vörur

19962

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

1 vörur

5574

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

22 vörur

5573

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

30 vörur

5030

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 25.000 - 25.499, T

400 vörur

5707

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 25.000 - 25.499, T

400 vörur

5703

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 50.000 - 50.499, T

400 vörur

5705

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 37.500 - 37.999, T

400 vörur

513

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSO

110 vörur

1056

VBMX indexable insert

VBMX indexable insert. Designation: VBMX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 vörur

1161

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 vörur

1047

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

71 vörur

1927

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 vörur

1972

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 vörur

1931

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 vörur

1581

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

10 vörur

2464

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

199 vörur

2463

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

205 vörur

2507

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 vörur

2518

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 vörur

2485

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

71 vörur

2601

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.170 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

98 vörur

4118

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 vörur

2944

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 vörur

4119

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 vörur

4229

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 12.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

36 vörur

4111

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

141 vörur

4114

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

144 vörur

4115

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

146 vörur

4025

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.500 mm – 25.650 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

91 vörur

2747

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

71 vörur

4113

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

152 vörur

4112

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

156 vörur

4599

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

4 vörur

4673

Machine tap for ISO metric threads

70 vörur

5593

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 vörur

6605

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 vörur

6602

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 vörur

6238

TCMT indexable insert

TCMT indexable insert. Designation: TCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 vörur

6239

SCMT indexable insert

4 vörur

7711

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

2 vörur

724

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

12 vörur

723

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"

13 vörur

7642

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 vörur

942

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 vörur

7648

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 vörur

7656

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 vörur

7638

TCGT indexable insert

TCGT indexable insert. Designation: TCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 vörur

7643

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 vörur

7653

TPGW indexable insert

TPGW indexable insert. Designation: TPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 vörur

7655

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 vörur

702

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.490 mm – 6.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

92 vörur

7637

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 vörur

706

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.500 mm – 1.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

15 vörur

732

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

199 vörur

730

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

211 vörur

970

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 vörur

943

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

7 vörur

944

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 vörur

4128

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

12 vörur

3752

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

2 vörur

3751

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

4136

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

4135

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

3754

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 vörur

3768

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 vörur

4499

Micro thread milling cutter set for metric threads

Micro thread milling cutter set for metric threads. Designation: Micro thread milling cutter set for metric threads, Diameter range: M2 - M4, TABLE_INFO_PA

2 vörur

5547

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

4770

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 vörur

3744

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 vörur

3524

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 vörur

4130

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

6 vörur

3748

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

3770

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 vörur

4137

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

4162

External thread milling cutter for ISO metric threads

External thread milling cutter for ISO metric threads. Designation: External thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P",

9 vörur

3735

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

3772

Universal thread milling cutter for NPTF-threads

Universal thread milling cutter for NPTF-threads. Designation: Universal thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

2 vörur

4129

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

12 vörur

4133

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

3542

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 vörur

3769

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 vörur

3746

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

3771

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

1 vörur

3597

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

1 vörur

4134

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

3758

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 vörur

3753

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 vörur

3596

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

18 vörur

3740

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

3745

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

3750

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

4131

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 vörur

3756

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 vörur

4214

Micro thread milling cutter for MJ threads

Micro thread milling cutter for MJ threads. Designation: Micro thread milling cutter for MJ threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 vörur

3773

Universal thread milling cutter for NPTF-threads

Universal thread milling cutter for NPTF-threads. Designation: Universal thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

2 vörur

3557

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 vörur

3734

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

14 vörur

3755

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 vörur

4132

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

3556

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 vörur

4226

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

14 vörur

4225

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

10 vörur

3541

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 vörur

3523

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 vörur

3757

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 vörur

4228

Micro thread milling cutter for BSP-threads

Micro thread milling cutter for BSP-threads. Designation: Micro thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

4 vörur

4215

Micro thread milling cutter for UNJC/UNJF- threads

Micro thread milling cutter for UNJC/UNJF- threads. Designation: Micro thread milling cutter for UNJC/UNJF- threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 vörur

3737

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

17 vörur

4001

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

14 vörur

3595

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

13 vörur

4163

External thread milling cutter for ISO metric threads

External thread milling cutter for ISO metric threads. Designation: External thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P",

12 vörur

4227

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

10 vörur

4223

Micro thread milling cutter for UNC/UNF threads

Micro thread milling cutter for UNC/UNF threads. Designation: Micro thread milling cutter for UNC/UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

23 vörur

3743

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

16 vörur

5548

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

4496

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 vörur

6486

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.35 - 12.7, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{

1 vörur

3209

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","va

7 vörur

19950

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 vörur

3598

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19951

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 vörur

3728

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 14.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val

2 vörur

3304

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

21 vörur

4372

Ratio end mill set RF 100 U (3-fluted cutter)

Ratio end mill set RF 100 U (3-fluted cutter). Designation: Ratio end mill set RF 100 U (3-fluted cutter), Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [

1 vörur

5582

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","va

5 vörur

6885

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

6886

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

6853

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

11 vörur

6855

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

37 vörur

6852

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

17 vörur

4371

Ratio end mill set RF 100 INOX NF

Ratio end mill set RF 100 INOX NF. Designation: Ratio end mill set RF 100 INOX NF, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

1 vörur

4348

High-performance roughing end mill RS 100 F set

High-performance roughing end mill RS 100 F set. Designation: High-performance roughing end mill RS 100 F set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 vörur

3799

End mill (4-fluted) set

End mill (4-fluted) set. Designation: End mill (4-fluted) set, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

1 vörur

4347

High-performance roughing end mill RS 100 F set

High-performance roughing end mill RS 100 F set. Designation: High-performance roughing end mill RS 100 F set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 vörur

4370

Ratio end mill set RF 100 VA

Ratio end mill set RF 100 VA. Designation: Ratio end mill set RF 100 VA, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

1 vörur

6957

Ratio end mill set RF 100 5 Speed

Ratio end mill set RF 100 5 Speed. Designation: Ratio end mill set RF 100 5 Speed, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 vörur

4344

High-performance roughing end mill RS 100 U set

High-performance roughing end mill RS 100 U set. Designation: High-performance roughing end mill RS 100 U set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 vörur

6758

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 1/4 - 5/8, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

1 vörur

6755

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

2 vörur

6754

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 5.7 - 15.6, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

2 vörur

5645

Ratio end mill set RF 100 U

Ratio end mill set RF 100 U. Designation: Ratio end mill set RF 100 U, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

1 vörur

6483

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

4 vörur

6482

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

4 vörur

5634

Ratio end mill set RF 100 U

Ratio end mill set RF 100 U. Designation: Ratio end mill set RF 100 U, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

62 vörur

2472

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

156 vörur

2718

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 vörur

5611

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

147 vörur

5612

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

104 vörur

5614

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

142 vörur

8621

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

150 vörur

8611

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

150 vörur

8610

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

150 vörur

8620

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

148 vörur

1210

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 5.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

4 vörur

4386

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

6 vörur

4387

Spindle flange SK/HSK-C

Spindle flange SK/HSK-C. Designation: Spindle flange SK/HSK-C, Internal diameter: 128.57 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

4 vörur

4385

Spindle mounting flange HSK

Spindle mounting flange HSK. Designation: Spindle mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

11 vörur

4582

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

4 vörur

4665

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 1/4", Internal diameter: 15.88 mm, T

10 vörur

4581

Spindle attachment mounting flange HSK

Spindle attachment mounting flange HSK. Designation: Spindle attachment mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

7 vörur

4586

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

5 vörur

5019

Two-fluted gun drill ZB 80

Two-fluted gun drill ZB 80. Designation: Two-fluted gun drill ZB 80, Diameter range: 8.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

3 vörur

5643

Two-fluted gun drill ZB 80

Two-fluted gun drill ZB 80. Designation: Two-fluted gun drill ZB 80, Diameter range: 8.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

3 vörur

4363

Spindle attachment flange module 6x6 HSK

Spindle attachment flange module 6x6 HSK. Designation: Spindle attachment flange module 6x6 HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

6 vörur

4290

HSK-A hydro expansion chuck extra long

HSK-A hydro expansion chuck extra long. Designation: HSK-A hydro expansion chuck extra long, Internal diameter: 32.00 mm, TABLE_INFO_PASSON: [{"attr":"P","

6 vörur

4368

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 3.012 mm – 25.032 mm, Nominal diamet

28 vörur

4369

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 3.012 mm – 125.032 mm, Nominal diame

82 vörur

4584

Spindle mounting flange HSK

Spindle mounting flange HSK. Designation: Spindle mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

6 vörur

4713

Spindle attachment flange module 4x4 HSK

Spindle attachment flange module 4x4 HSK. Designation: Spindle attachment flange module 4x4 HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

6 vörur

19971

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

4 vörur

3049

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 vörur

3024

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

11 vörur

19969

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 vörur

5533

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 4.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

6 vörur

25306

Square shank holder, 90° offset and stepped, with IC

Square shank holder, 90° offset and stepped, with IC. Designation: Square shank holder, 90° offset and stepped, with IC, TABLE_INFO_PASSON: [{"attr":"P","v

2 vörur

25312

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 vörur

25014

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 vörur

25020

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 vörur

25310

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

1 vörur

25003

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

7 vörur

25315

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 vörur

25015

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 vörur

25309

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 vörur

25303

Square shank holder, 90° offset and stepped without IC

Square shank holder, 90° offset and stepped without IC. Designation: Square shank holder, 90° offset and stepped without IC, TABLE_INFO_PASSON: [{"attr":"P

2 vörur

26103

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

17 vörur

25304

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 vörur

25004

Square shank holder, 90° offset and stepped without IC

Square shank holder, 90° offset and stepped without IC. Designation: Square shank holder, 90° offset and stepped without IC, TABLE_INFO_PASSON: [{"attr":"P

2 vörur

25010

Polygon shank holder, straight 0°

Polygon shank holder, straight 0°. Designation: Polygon shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

4 vörur

25363

Square shank holder, 45° offset, external machining without IC

Square shank holder, 45° offset, external machining without IC. Designation: Square shank holder, 45° offset, external machining without IC, TABLE_INFO_PAS

9 vörur

25364

Square shank holder, 45° offset, external machining with IC

Square shank holder, 45° offset, external machining with IC. Designation: Square shank holder, 45° offset, external machining with IC, TABLE_INFO_PASSON: [

8 vörur

25314

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 vörur

25011

HSK-T adaptor for tapping chucks

HSK-T adaptor for tapping chucks. Designation: HSK-T adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

1 vörur

25311

HSK-T adaptor for tapping chucks straight 0°

HSK-T adaptor for tapping chucks straight 0°. Designation: HSK-T adaptor for tapping chucks straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

2 vörur

25002

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

7 vörur

25013

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 vörur

25005

Square shank holder, 90° offset and stepped, with IC

Square shank holder, 90° offset and stepped, with IC. Designation: Square shank holder, 90° offset and stepped, with IC, TABLE_INFO_PASSON: [{"attr":"P","v

2 vörur

25372

Square shank holder straight, for external machining with adjustable IC

Square shank holder straight, for external machining with adjustable IC. Designation: Square shank holder straight, for external machining with adjustable

12 vörur

25313

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 vörur

25359

Square shank holder, 90° offset, external machining, with IC

Square shank holder, 90° offset, external machining, with IC. Designation: Square shank holder, 90° offset, external machining, with IC, TABLE_INFO_PASSON:

32 vörur

25365

Square shank holder, 45° offset, external machining with IC

Square shank holder, 45° offset, external machining with IC. Designation: Square shank holder, 45° offset, external machining with IC, TABLE_INFO_PASSON: [

8 vörur

25016

HSK-T adaptor for tapping chucks straight 0°

HSK-T adaptor for tapping chucks straight 0°. Designation: HSK-T adaptor for tapping chucks straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

2 vörur

25305

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 vörur

25353

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

32 vörur

25307

Polygon shank holder, straight 0°

Polygon shank holder, straight 0°. Designation: Polygon shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

4 vörur

25350

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

36 vörur

25357

Square shank holder, 90° offset, external machining, without IC

Square shank holder, 90° offset, external machining, without IC. Designation: Square shank holder, 90° offset, external machining, without IC, TABLE_INFO_P

36 vörur

25019

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 vörur

26101

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

17 vörur

25373

Square shank holder straight, for external machining with adjustable IC

Square shank holder straight, for external machining with adjustable IC. Designation: Square shank holder straight, for external machining with adjustable

12 vörur

25356

Square shank holder, 90° offset, external machining, without IC

Square shank holder, 90° offset, external machining, without IC. Designation: Square shank holder, 90° offset, external machining, without IC, TABLE_INFO_P

36 vörur

25308

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 vörur

25362

Square shank holder, 45° offset, external machining without IC

Square shank holder, 45° offset, external machining without IC. Designation: Square shank holder, 45° offset, external machining without IC, TABLE_INFO_PAS

9 vörur

26100

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

17 vörur

25012

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 vörur

26102

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

17 vörur

25352

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

32 vörur

25358

Square shank holder, 90° offset, external machining, with IC

Square shank holder, 90° offset, external machining, with IC. Designation: Square shank holder, 90° offset, external machining, with IC, TABLE_INFO_PASSON:

32 vörur

25351

Square shank holder, straight, external machining without IC

6 vörur

27052

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 vörur

27009

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 vörur

4050

MQL mounting adapter set

MQL mounting adapter set. Designation: MQL mounting adapter set, Total length: 1.00 mm, EAN: 4049844097094

2 vörur

27007

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 vörur

27008

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 vörur

27055

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 vörur

4237

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 45.500 mm, Internal diameter: 14.29 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

16 vörur

4235

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 10.000 mm – 45.500 mm, Internal diameter: 2.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

26 vörur

4335

Sealing washer

Sealing washer. Designation: Sealing washer, Total length: 4.00 mm, Internal diameter: 5.00 mm, EAN: 4049844009837, Standard: Company std.

144 vörur

4236

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 45.500 mm, Internal diameter: 3.17 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

20 vörur

4302

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 10.000 mm – 45.500 mm, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

38 vörur

4212

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 39.000 mm, Internal diameter: 15.88 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

4 vörur

4973

Clamping force measuring instrument

Clamping force measuring instrument. Designation: Clamping force measuring instrument, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 vörur

4974

Clamping force measuring instrument

Clamping force measuring instrument. Designation: Clamping force measuring instrument, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 vörur

4970

ISO taper proofing bar SK

ISO taper proofing bar SK. Designation: ISO taper proofing bar SK, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val

2 vörur

4716

Intermediate sleeve with sealing lip

Intermediate sleeve with sealing lip. Designation: Intermediate sleeve with sealing lip, Diameter range: 14.010 mm – 238.080 mm, Nominal diameter: 20.01 mm

16 vörur

4971

HSK proofing bar

HSK proofing bar. Designation: HSK proofing bar, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

7 vörur

5772

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 28.000 - 29.999, Total length: 12.00

24 vörur

5770

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 12.400 - 12.899, Total length: 4.00

86 vörur

5752

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 13.900 - 14.399, Total length: 4.00

113 vörur

5753

Sealing washer for two-fluted drills

Sealing washer for two-fluted drills. Designation: Sealing washer for two-fluted drills, Diameter range: 7.600 - 7.799, Total length: 4.00 mm, EAN: 4049844

80 vörur

4722

Hydro expansion chuck flange module 6x6

Hydro expansion chuck flange module 6x6. Designation: Hydro expansion chuck flange module 6x6, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

4 vörur

4360

Hydro expansion chuck flange module 4x4

Hydro expansion chuck flange module 4x4. Designation: Hydro expansion chuck flange module 4x4, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

4 vörur

4714

HPC clamping chuck flange module 6x6

HPC clamping chuck flange module 6x6. Designation: HPC clamping chuck flange module 6x6, Diameter range: 20 - 32, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

4 vörur

4760

Shrink fit chuck flange module 4x4

Shrink fit chuck flange module 4x4. Designation: Shrink fit chuck flange module 4x4, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

11 vörur

4717

Shrink fit chuck flange module 6x6

Shrink fit chuck flange module 6x6. Designation: Shrink fit chuck flange module 6x6, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

11 vörur

4723

Alignment adapter HSK-A module 6x6

Alignment adapter HSK-A module 6x6. Designation: Alignment adapter HSK-A module 6x6, Internal diameter: 80.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

15 vörur

4724

Alignment adapter SK module 4x4

Alignment adapter SK module 4x4. Designation: Alignment adapter SK module 4x4, Internal diameter: 35.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

10 vörur

5513

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

45 vörur

6070

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

66 vörur

6068

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

75 vörur

6069

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

67 vörur

770

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

70 vörur

769

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

66 vörur

768

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

112 vörur

5651

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

140 vörur

5650

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

141 vörur

6026

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

189 vörur

6025

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 vörur

6023

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

206 vörur

6024

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 vörur

19989

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 vörur

19987

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 vörur

3730

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 vörur

19993

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 vörur

19983

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 vörur

3296

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 vörur

3294

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

3297

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

19 vörur

19985

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 vörur

3719

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 vörur

3286

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

15 vörur

3295

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

30 vörur

3634

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

12 vörur

3720

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 vörur

3154

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

30 vörur

3729

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 vörur

5542

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

11 vörur

5531

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 vörur

5546

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 vörur

5502

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

13 vörur

5530

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 vörur

4096

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 4.010 mm – 16.020 mm, Internal diameter: 14.00 m

8 vörur

4097

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 4.010 mm – 8.010 mm, Internal diameter: 4.00 mm,

3 vörur

4095

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 14.020 mm – 25.032 mm, Internal diameter: 20.00

7 vörur

26201

Parting off blade with IC

Parting off blade with IC. Designation: Parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"}

4 vörur

26200

Parting off blade without IC

Parting off blade without IC. Designation: Parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

4 vörur

4312

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, Diameter range: 32 mm – 32 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

1 vörur

4316

HSK-C driving key

HSK-C driving key. Designation: HSK-C driving key, Total length: 136.50 mm, EAN: 4031093548144, Type of machine interface: HSK-C

2 vörur

4319

SK driving key

SK driving key. Designation: SK driving key, Total length: 192.25 mm, EAN: 4031093548182, Type of machine interface: SK

7 vörur

4315

SK driving key

SK driving key. Designation: SK driving key, Total length: 189.95 mm, EAN: 4031093548120, Standard: Company std., Type of machine interface: SK

11 vörur

4355

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, Diameter range: 32 mm – 80 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

11 vörur

4991

Interchangeable disc

Interchangeable disc. Designation: Interchangeable disc, Total length: 30.00 mm, EAN: 4031093567114

8 vörur

Empty case

Empty case. Designation: Empty case, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

5 vörur

4354

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 vörur

4955

RFID data carrier

8 vörur

6106

Locking disc

Locking disc. Designation: Locking disc, Total length: 5.00 mm, EAN: 4049844400030

2 vörur

Plastic stand only

Plastic stand only. Designation: Plastic stand only, Diameter range: 1/16 - 1/2, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 vörur

1040

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 41.000 mm – 90.000 mm, Internal diameter: 6.00 mm, TABLE

24 vörur

1041

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 41.000 mm – 76.000 mm, Internal diameter: 6.00 mm, TABLE

24 vörur

4068

Flow rate measuring device PQ 3000

Flow rate measuring device PQ 3000. Designation: Flow rate measuring device PQ 3000, EAN: 4031093743662

1 vörur

4512

SK / HSK-C adaptor for tapping chucks

SK / HSK-C adaptor for tapping chucks. Designation: SK / HSK-C adaptor for tapping chucks, Diameter range: 32 mm – 100 mm, TABLE_INFO_PASSON: [{"attr":"P",

10 vörur

4514

MAS/BT / HSK-C adaptor for tapping chucks

MAS/BT / HSK-C adaptor for tapping chucks. Designation: MAS/BT / HSK-C adaptor for tapping chucks, Diameter range: 40 mm – 63 mm, TABLE_INFO_PASSON: [{"att

6 vörur

4968

Taper measuring gauge for HSK shank

Taper measuring gauge for HSK shank. Designation: Taper measuring gauge for HSK shank, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 vörur

4948

HSK-A Mounting adapter

HSK-A Mounting adapter. Designation: HSK-A Mounting adapter, Total length: 46.10 mm, Shank diameter: 14.00 mm, EAN: 4049844010277

6 vörur

4922

Driver set

Driver set. Designation: Driver set, Diameter range: 16.000 mm – 50.000 mm, Nominal diameter: 32.00 mm, Total length: 20.00 mm, EAN: 4031093391771, Standar

6 vörur

4978

Measuring gauge for HSK clamping shoulders

Measuring gauge for HSK clamping shoulders. Designation: Measuring gauge for HSK clamping shoulders, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

7 vörur

4769

Stop disc

Stop disc. Designation: Stop disc, EAN: 4031093716260

8 vörur

4969

Measuring gauge for HSK spindles

Measuring gauge for HSK spindles. Designation: Measuring gauge for HSK spindles, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 vörur

4116

Floating holder with ER collet chuck holder

Floating holder with ER collet chuck holder. Designation: Floating holder with ER collet chuck holder, Diameter range: 3 - 20, TABLE_INFO_PASSON: [{"attr":

5 vörur

4117

Floating side lock holder

Floating side lock holder. Designation: Floating side lock holder, Diameter range: 16 - 25, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 vörur

1659

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 vörur

1673

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

60 vörur

1663

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

134 vörur

1662

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

141 vörur

1661

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 21.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

112 vörur

1660

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

135 vörur

2475

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

20 vörur

2478

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

40 vörur

2480

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

159 vörur

2479

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 2.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

202 vörur

2477

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

204 vörur

2712

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

18 vörur

2939

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PAS

25 vörur

2717

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

27 vörur

2713

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

72 vörur

2996

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 2.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

160 vörur

2711

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

106 vörur

4044

Ratio drill with coolant ducts

163 vörur

5580

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 vörur

5514

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

189 vörur

5512

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

156 vörur

5714

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

155 vörur

6596

Pilot drill with coolant ducts

Pilot drill with coolant ducts. Designation: Pilot drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

205 vörur

8521

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

155 vörur

5510 SHOPT 20260821

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 3.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 vörur

3680

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 vörur

3558

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 vörur

19982

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

3314

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 vörur

3633

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 vörur

3196

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

21 vörur

3194

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 vörur

19984

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 vörur

19986

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 vörur

3361

Hard profile cutter with Torus grind GF 300 T

Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO

28 vörur

19988

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

15 vörur

3560

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

31 vörur

3362

Hard profile cutter with Torus grind GF 300 T

Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO

36 vörur

3856

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_P

26 vörur

3635

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 vörur

3540

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 vörur

19992

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

11 vörur

3555

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 vörur

3193

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 vörur

3636

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

21 vörur

3559

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

20 vörur

3106

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

20 vörur

3367

Slot drill GA 200 A (3-fluted)

Slot drill GA 200 A (3-fluted). Designation: Slot drill GA 200 A (3-fluted), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

18 vörur

3195

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

33 vörur

3561

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

32 vörur

5507

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 vörur

5743

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 vörur

5730

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 vörur

6722

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [

8 vörur

4268

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_P

24 vörur

5506

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 vörur

6721

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 vörur

5505

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 vörur

546

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

8 vörur

5649

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

7 vörur

6029

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 vörur

6028

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

13 vörur

6027

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 vörur

6785

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 vörur

6736

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

16 vörur

6787

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 vörur

3766

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

3533

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

3760

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 vörur

3538

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

3539

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

3 vörur

3544

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 vörur

3529

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

3546

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 vörur

3543

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 vörur

3545

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 vörur

4000

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

20 vörur

3366

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

6 vörur

3693

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 vörur

3894

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PAS

8 vörur

3522

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

3469

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 vörur

3896

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

6 vörur

3127

Roughing end mill GS 100 A (coarse teeth)

Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON:

9 vörur

3807

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

6 vörur

19941

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 vörur

3364

Roughing end mill GS 100 A (coarse teeth)

5 vörur

3019

End mill

End mill. Designation: End mill, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 vörur

19977

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 vörur

3200

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 vörur

3508

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

19973

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 vörur

19975

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 vörur

3204

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"at

11 vörur

3721

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 vörur

3718

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 vörur

19965

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 vörur

3892

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

21 vörur

3499

Ratio end mill RF 100 Ti

Ratio end mill RF 100 Ti. Designation: Ratio end mill RF 100 Ti, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

48 vörur

19981

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 vörur

3898

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 vörur

3298

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 vörur

3873

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

22 vörur

3871

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

19979

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 vörur

3805

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 vörur

3285

End mill

End mill. Designation: End mill, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

14 vörur

3722

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 vörur

19967

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 vörur

3630

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 vörur

3731

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 vörur

3632

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

6 vörur

3047

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 vörur

3201

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 vörur

3313

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

3803

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

22 vörur

3890

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 vörur

3299

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 vörur

3471

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 vörur

5583

Hard roughing end mill GS 100 H (fine teeth)

Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_P

6 vörur

6731

Ratio end mill RF 100 AL

9 vörur

6882

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

6702

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 vörur

6727

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

5 vörur

6890

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 vörur

6479

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 vörur

6726

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

6884

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

5655

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 vörur

6869

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

7 vörur

6703

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 vörur

5532

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 vörur

6733

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 vörur

5504

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

8 vörur

6871

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 vörur

6888

High-performance roughing end mill RS 100 U

High-performance roughing end mill RS 100 U. Designation: High-performance roughing end mill RS 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 vörur

6798

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

21 vörur

5544

Roughing end mill (3-fluted)

Roughing end mill (3-fluted). Designation: Roughing end mill (3-fluted), Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

5 vörur

6861

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

24 vörur

5535

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 vörur

6804

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

19 vörur

5654

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 vörur

6735

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 vörur

6802

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

7 vörur

6467

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 vörur

6708

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 vörur

6800

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"at

5 vörur

5534

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 vörur

6729

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

27 vörur

6760

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 vörur

6465

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 vörur

6710

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

9 vörur

6768

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

6728

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

8 vörur

6878

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

12 vörur

6481

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 vörur

5545

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

8 vörur

6959

Ratio end mill RF 100 Speed P

Ratio end mill RF 100 Speed P. Designation: Ratio end mill RF 100 Speed P, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

6781

Ratio end mill set RF 100 Speed

Ratio end mill set RF 100 Speed. Designation: Ratio end mill set RF 100 Speed, Diameter range: 6.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

5 vörur

6971

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

25024

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 vörur

25321

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 vörur

25302

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 vörur

25006

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 vörur

25369

Round shank holder, internal machining without IC

Round shank holder, internal machining without IC. Designation: Round shank holder, internal machining without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-

24 vörur

25370

Round shank holder, internal machining with IC

Round shank holder, internal machining with IC. Designation: Round shank holder, internal machining with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

24 vörur

25371

Round shank holder, internal machining with IC

Round shank holder, internal machining with IC. Designation: Round shank holder, internal machining with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

24 vörur

25368

Round shank holder, internal machining without IC

Round shank holder, internal machining without IC. Designation: Round shank holder, internal machining without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-

24 vörur

27015

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 vörur

27016

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 vörur

27056

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 vörur

4718

Driving key

Driving key. Designation: Driving key, Total length: 115.00 mm, Shank length: 50.00 mm, Shank diameter: 6.00 mm, Internal diameter: 6.00 mm, EAN: 404984410

29 vörur

1946

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.600 mm – 14.100 mm, TABLE_INFO_PASSO

20 vörur

6788

Quadrant milling cutter

Quadrant milling cutter. Designation: Quadrant milling cutter, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

12 vörur

6737

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

16 vörur

3520

Thread milling cutter for NPT-threads

8 vörur

3526

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 vörur

3796

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

8 vörur

3778

Drill thread milling cutter for ISO metric threads

Drill thread milling cutter for ISO metric threads. Designation: Drill thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

9 vörur

3525

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 vörur

3791

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

8 vörur

3512

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 vörur

3794

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

8 vörur

3789

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

9 vörur

3790

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

10 vörur

3513

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 vörur

3767

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

3764

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

8 vörur

3528

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 vörur

3779

Drill thread milling cutter for ISO metric threads

Drill thread milling cutter for ISO metric threads. Designation: Drill thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

8 vörur

3784

Drill thread milling cutter for ISO metric threads

Drill thread milling cutter for ISO metric threads. Designation: Drill thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

9 vörur

3553

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 vörur

3780

Drill thread milling cutter for ISO metric threads

Drill thread milling cutter for ISO metric threads. Designation: Drill thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

9 vörur

3510

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 vörur

3762

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 vörur

3761

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 vörur

3793

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

9 vörur

3788

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

11 vörur

3759

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

Drill thread milling cutter for ISO metric threads. Designation: Drill thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

8 vörur

3018

Ball nose end mill

Ball nose end mill. Designation: Ball nose end mill, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

5 vörur

3897

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 vörur

3895

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

6 vörur

3363

Hard multi-tooth end mill corner radius GH 100 H

Hard multi-tooth end mill corner radius GH 100 H. Designation: Hard multi-tooth end mill corner radius GH 100 H, Diameter range: 6.000 mm – 16.000 mm, TABL

5 vörur

19966

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 vörur

3507

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

3893

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PAS

8 vörur

3889

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

8 vörur

3727

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 vörur

3473

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 vörur

3800

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

22 vörur

19978

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

15 vörur

3202

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 vörur

3509

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

19972

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

11 vörur

3637

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 vörur

3733

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

5 vörur

3839

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

19974

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 vörur

3470

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 vörur

3629

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 vörur

3198

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 vörur

3472

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 vörur

3017

Ball nose end mill

Ball nose end mill. Designation: Ball nose end mill, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

5 vörur

3312

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

3689

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

14 vörur

3012

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

13 vörur

3197

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

18 vörur

3716

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

6 vörur

19964

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 vörur

3649

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

18 vörur

3468

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 vörur

19976

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 vörur

3306

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 vörur

3599

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

27 vörur

3311

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

14 vörur

3837

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

3015

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

3691

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

3112

End mill with corner radius

End mill with corner radius. Designation: End mill with corner radius, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

22 vörur

3736

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

12 vörur

3208

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 vörur

3804

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 vörur

19980

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 vörur

3043

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 vörur

3891

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

21 vörur

3563

Multi-tooth end mill with corner radius GH 100 U

Multi-tooth end mill with corner radius GH 100 U. Designation: Multi-tooth end mill with corner radius GH 100 U, Diameter range: 3.000 mm – 20.000 mm, TABL

31 vörur

3872

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

22 vörur

19940

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 vörur

3806

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

6 vörur

3562

End mill with corner radius (4-fluted)

End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

34 vörur

3715

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

13 vörur

3631

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

6 vörur

3887

High-performance roughing end mill RS 100 U

High-performance roughing end mill RS 100 U. Designation: High-performance roughing end mill RS 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 vörur

3696

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 vörur

3498

Ratio end mill RF 100 Ti

Ratio end mill RF 100 Ti. Designation: Ratio end mill RF 100 Ti, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

48 vörur

3111

End mill with corner radius (4-fluted)

End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

22 vörur

3023

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

13 vörur

6464

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 vörur

6881

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 vörur

5653

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 vörur

6799

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"at

5 vörur

6833

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

12 vörur

6847

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

10 vörur

6870

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 vörur

6806

Kevlar end mill FR 100

Kevlar end mill FR 100. Designation: Kevlar end mill FR 100, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

12 vörur

6856

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 vörur

6734

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 vörur

6770

Kevlar end mill FR 100

Kevlar end mill FR 100. Designation: Kevlar end mill FR 100, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

14 vörur

6814

High-feed end mill G-Mold 65 HF

High-feed end mill G-Mold 65 HF. Designation: High-feed end mill G-Mold 65 HF, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 vörur

6835

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 vörur

6858

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 vörur

6725

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

7 vörur

6805

Kevlar end mill FR 100

Kevlar end mill FR 100. Designation: Kevlar end mill FR 100, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

12 vörur

6801

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

7 vörur

6719

Kevlar end mill CR 100

Kevlar end mill CR 100. Designation: Kevlar end mill CR 100, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

6 vörur

6866

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

5 vörur

6720

Kevlar end mill CR 100

Kevlar end mill CR 100. Designation: Kevlar end mill CR 100, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

6 vörur

6463

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

5 vörur

6717

Kevlar end mill CR 100

Kevlar end mill CR 100. Designation: Kevlar end mill CR 100, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

6 vörur

5556

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 vörur

6730

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 vörur

6879

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 vörur

6772

HSC end mills High Feed HF 300

HSC end mills High Feed HF 300. Designation: HSC end mills High Feed HF 300, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

8 vörur

6877

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

12 vörur

6827

Finishing end mill G-Mold μ 65 F

Finishing end mill G-Mold μ 65 F. Designation: Finishing end mill G-Mold μ 65 F, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 vörur

6797

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 vörur

6764

Ratio end mill RF 100 F 90°

Ratio end mill RF 100 F 90°. Designation: Ratio end mill RF 100 F 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 vörur

6466

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 vörur

5729

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 vörur

6867

Ratio end mill RF 100 Skyliner

Ratio end mill RF 100 Skyliner. Designation: Ratio end mill RF 100 Skyliner, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

7 vörur

6478

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

14 vörur

6821

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 vörur

6851

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

38 vörur

6868

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

7 vörur

6860

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

24 vörur

6716

Pilot end mill RF 100 P

Pilot end mill RF 100 P. Designation: Pilot end mill RF 100 P, Diameter range: 1.400 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

24 vörur

6723

End mill with corner radius (4-fluted)

End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

8 vörur

6709

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

9 vörur

6706

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 vörur

6824

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partia

31 vörur

6766

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 vörur

6838

Torus end mill G-Mold 65 T

Torus end mill G-Mold 65 T. Designation: Torus end mill G-Mold 65 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

37 vörur

6832

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

12 vörur

6822

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 vörur

6837

Torus end mill G-Mold 65 T

Torus end mill G-Mold 65 T. Designation: Torus end mill G-Mold 65 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

37 vörur

6765

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 vörur

6864

Ratio end mill RF 100 7 Speed

Ratio end mill RF 100 7 Speed. Designation: Ratio end mill RF 100 7 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 vörur

6732

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 vörur

6887

High-performance roughing end mill RS 100 U

High-performance roughing end mill RS 100 U. Designation: High-performance roughing end mill RS 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 vörur

6854

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

37 vörur

4270

Hard multi-tooth end mill corner radius GH 100 H

Hard multi-tooth end mill corner radius GH 100 H. Designation: Hard multi-tooth end mill corner radius GH 100 H, Diameter range: 3.000 mm – 16.000 mm, TABL

16 vörur

6803

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

19 vörur

6793

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 2.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 vörur

6850

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

38 vörur

6820

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 vörur

5735

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 vörur

6823

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 vörur

6831

High-feed end mill G-Mold 65 HF

High-feed end mill G-Mold 65 HF. Designation: High-feed end mill G-Mold 65 HF, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 vörur

8137

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 vörur

6948

Finishing end mill with corner radius G-Mold 65 FR

Finishing end mill with corner radius G-Mold 65 FR. Designation: Finishing end mill with corner radius G-Mold 65 FR, Diameter range: 3.000 mm – 16.000 mm,

8 vörur

8234

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 vörur

6974

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 vörur

6960

Ratio end mill RF 100 Speed P

Ratio end mill RF 100 Speed P. Designation: Ratio end mill RF 100 Speed P, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

6937

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 vörur

8136

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 vörur

8070

Micro-precision milling cutter RF 100 AL

Micro-precision milling cutter RF 100 AL. Designation: Micro-precision milling cutter RF 100 AL, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{

19 vörur

6777

Ratio end mill set RF 100 Speed

Ratio end mill set RF 100 Speed. Designation: Ratio end mill set RF 100 Speed, Diameter range: 6.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

5 vörur

8230

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

21 vörur

8069

Micro-precision milling cutter RF 100 AL

Micro-precision milling cutter RF 100 AL. Designation: Micro-precision milling cutter RF 100 AL, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{

19 vörur

6936

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 vörur

6972

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

6980

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 vörur

8248

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

38 vörur

6976

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 vörur

6935

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 vörur

6945

Finishing end mill G-Mold 65 F

Finishing end mill G-Mold 65 F. Designation: Finishing end mill G-Mold 65 F, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 vörur

6970

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 vörur

8066

Micro-precision milling cutter RF 100 AL

Micro-precision milling cutter RF 100 AL. Designation: Micro-precision milling cutter RF 100 AL, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{

30 vörur

6966

Ratio end mill RF 100 Ti

Ratio end mill RF 100 Ti. Designation: Ratio end mill RF 100 Ti, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

48 vörur

8138

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 2.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 vörur

6943

Ratio end mill G-Mold 65 U

Ratio end mill G-Mold 65 U. Designation: Ratio end mill G-Mold 65 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

9 vörur

8256

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

47 vörur

8232

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

21 vörur

6978

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 vörur

8254

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

47 vörur

6958

Ratio end mill RF 100 Speed P

Ratio end mill RF 100 Speed P. Designation: Ratio end mill RF 100 Speed P, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 vörur

6947

Finishing end mill with corner radius G-Mold 65 FR

Finishing end mill with corner radius G-Mold 65 FR. Designation: Finishing end mill with corner radius G-Mold 65 FR, Diameter range: 3.000 mm – 16.000 mm,

23 vörur

6962

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

44 vörur

6964

Ratio end mill RF 100 iMill

Ratio end mill RF 100 iMill. Designation: Ratio end mill RF 100 iMill, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial

44 vörur

8236

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

21 vörur

6982

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

22 vörur

6946

Finishing end mill G-Mold 65 F

Finishing end mill G-Mold 65 F. Designation: Finishing end mill G-Mold 65 F, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 vörur

8238

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

21 vörur

8135

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 vörur

8252

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

50 vörur

6778

Ratio end mill set RF 100 Speed M

Ratio end mill set RF 100 Speed M. Designation: Ratio end mill set RF 100 Speed M, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

7 vörur

8240

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

20 vörur

8246

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

50 vörur

8250

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

50 vörur

8242

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

20 vörur

8244

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

50 vörur

8065

Micro-precision milling cutter RF 100 AL

Micro-precision milling cutter RF 100 AL. Designation: Micro-precision milling cutter RF 100 AL, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{

30 vörur

4098

Floating holder with ER collet chuck holder

Floating holder with ER collet chuck holder. Designation: Floating holder with ER collet chuck holder, Diameter range: 2 - 16, Internal diameter: 20.00 mm,

6 vörur

4169

Floating side lock holder

Floating side lock holder. Designation: Floating side lock holder, Diameter range: 12 - 20, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

3 vörur

4174

Floating side lock holder

Floating side lock holder. Designation: Floating side lock holder, Diameter range: 4 - 10, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","va

1 vörur

4167

Floating side lock holder

Floating side lock holder. Designation: Floating side lock holder, Diameter range: 16 - 25, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

3 vörur

3574

Dovetail cutters

Dovetail cutters. Designation: Dovetail cutters, Diameter range: 16.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

4 vörur

3576

Dovetail cutters

Dovetail cutters. Designation: Dovetail cutters, Diameter range: 16.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

4 vörur

3577

Dovetail cutters

Dovetail cutters. Designation: Dovetail cutters, Diameter range: 16.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

4 vörur

3572

Dovetail cutters

Dovetail cutters. Designation: Dovetail cutters, Diameter range: 16.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

4 vörur

125

Dies for ISO metric threads

Dies for ISO metric threads. Designation: Dies for ISO metric threads, EAN: 4031093001588, Cutting material: HSS, Surface: bright, Tolerance class thread:

7 vörur

121

Dies for ISO metric threads

Dies for ISO metric threads. Designation: Dies for ISO metric threads, Total length: 7.00 mm, EAN: 4031093001465, Cutting material: HSS, Surface: bright, T

9 vörur

181

Dies for UNC threads

Dies for UNC threads. Designation: Dies for UNC threads, Total length: 5.00 mm, EAN: 4031093008686, Cutting material: HSS, Surface: bright, Cutting directi

1 vörur

185

Dies for UNF threads

Dies for UNF threads. Designation: Dies for UNF threads, Total length: 10.00 mm, EAN: 4031093009263, Cutting material: HSS, Surface: bright, Cutting direct

10 vörur

171

Dies for BSW threads

Dies for BSW threads. Designation: Dies for BSW threads, EAN: 4031093007832, Cutting material: HSS, Surface: bright, Cutting direction: Right-hand

1 vörur

140

Dies for ISO metric threads

Dies for ISO metric threads. Designation: Dies for ISO metric threads, Total length: 14.00 mm, EAN: 4031093003285, Cutting material: HSS, Surface: bright,

Dies for ISO metric fine threads. Designation: Dies for ISO metric fine threads, Total length: 16.00 mm, EAN: 4031093006279, Cutting material: HSS, Surface

52 vörur

176

Dies for BSP threads

Dies for BSP threads. Designation: Dies for BSP threads, Total length: 22.00 mm, EAN: 4031093008563, Cutting material: HSS, Surface: bright, Tolerance clas

11 vörur

1433

Hand taper reamer

Hand taper reamer. Designation: Hand taper reamer, Diameter range: 3.000 mm – 23.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

5 vörur

428

Hand taper reamer

Hand taper reamer. Designation: Hand taper reamer, Diameter range: 2.500 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

2 vörur

414

Bridge reamer

Bridge reamer. Designation: Bridge reamer, Diameter range: 6.400 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

29 vörur

429

Hand taper reamer

Hand taper reamer. Designation: Hand taper reamer, Diameter range: 1.200 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

23 vörur

412

Hand reamer

Hand reamer. Designation: Hand reamer, Diameter range: 1.000 mm – 49.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

53 vörur

416

Expanding hand reamer

Expanding hand reamer. Designation: Expanding hand reamer, Diameter range: 24.00 - 27.50, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"

19 vörur

413

Hand reamer

Hand reamer. Designation: Hand reamer, Diameter range: 1.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

67 vörur

415

Adjustable hand reamer

Adjustable hand reamer. Designation: Adjustable hand reamer, Diameter range: 4.000 mm – 59.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

56 vörur

1682

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 6.000 mm – 40.000 mm, Internal diameter: 4.20 mm, TABLE_

19 vörur

1683

High-performance reamer H7 series

96 vörur

6020

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 12.030 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

75 vörur

6019

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

28 vörur

4364

Length adjustment screw for hydraulic synchro tapping chucks

Length adjustment screw for hydraulic synchro tapping chucks. Designation: Length adjustment screw for hydraulic synchro tapping chucks, Internal diameter:

17 vörur

301

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.050 mm – 1.950 mm, TABLE_INFO_PA

231 vörur

646

Straight shank core drill

Straight shank core drill. Designation: Straight shank core drill, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"}

2 vörur

660

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.160 mm – 1.900 mm, TABLE_INFO_PA

111 vörur

1681

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 6.000 mm – 40.000 mm, Internal diameter: 5.00 mm, TABLE_

11 vörur

1680

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 6.000 mm – 40.000 mm, Internal diameter: 5.00 mm, TABLE_

11 vörur

1036

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

18 vörur

1037

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

18 vörur

1678

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 vörur

1449

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

91 vörur

1679

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 vörur

1427

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 0.980 mm – 12.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

80 vörur

4103

Deburring reamer

Deburring reamer. Designation: Deburring reamer, Diameter range: 4.00 - 4.49, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"att

7 vörur

5527

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 0.970 mm – 12.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

80 vörur

6016

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

27 vörur

6017

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

99 vörur

6018

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 0.970 mm – 12.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

80 vörur

1549

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 14.000 mm – 42.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

30 vörur

1548

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 14.000 mm – 42.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

30 vörur

1018

AeroX split point drill

AeroX split point drill. Designation: AeroX split point drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

133 vörur

6030

Short flute drill set

Short flute drill set. Designation: Short flute drill set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

1 vörur

693

Short flute drill

Short flute drill. Designation: Short flute drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

30 vörur

1137

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 6.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

3 vörur

311

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 1.100 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

25 vörur

634

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 7.800 mm – 49.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

25 vörur

635

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 8.000 mm – 31.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

6 vörur

623

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 10.000 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{

45 vörur

6999

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 6.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

1 vörur

6996

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 8.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

3 vörur

9502

Jobber drill StepPower

Jobber drill StepPower. Designation: Jobber drill StepPower, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

43 vörur

464

Pilot for fine tolerances

Pilot for fine tolerances. Designation: Pilot for fine tolerances, Diameter range: 8.400 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

18 vörur

465

Pilot for medial tolerances

Pilot for medial tolerances. Designation: Pilot for medial tolerances, Diameter range: 9.000 mm – 39.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

19 vörur

466

Pilot for tapping size holes

Pilot for tapping size holes. Designation: Pilot for tapping size holes, Diameter range: 6.800 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

24 vörur

533

Straight shank core drill

Straight shank core drill. Designation: Straight shank core drill, Diameter range: 3.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 9.400 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

14 vörur

514

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 5.900 mm – 17.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

10 vörur

505

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 4.200 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"

52 vörur

541

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 9.000 mm – 22.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

7 vörur

539

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 10.000 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

9 vörur

569

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 7.500 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

5 vörur

540

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

7 vörur

536

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

6 vörur

576

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 14.000 mm – 40.000 mm, TABLE

6 vörur

537

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 11.000 mm – 29.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

6 vörur

574

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 8.000 mm – 40.000 mm, TABLE_

9 vörur

555

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 5.000 mm – 31.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

31 vörur

538

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

7 vörur

561

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 2.400 mm – 5.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr

22 vörur

575

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 8.000 mm – 20.000 mm, TABLE_

6 vörur

534

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 7.400 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

126 vörur

578

Aircraft extension drill, 12 inches long

Aircraft extension drill, 12 inches long. Designation: Aircraft extension drill, 12 inches long, Diameter range: 1.500 mm – 8.500 mm, TABLE_INFO_PASSON: [{

49 vörur

570

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 12.000 mm – 23.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

4 vörur

577

Aircraft extension drill, 6 inches long

Aircraft extension drill, 6 inches long. Designation: Aircraft extension drill, 6 inches long, Diameter range: 1.500 mm – 8.500 mm, TABLE_INFO_PASSON: [{"a

58 vörur

554

Straight shank drills double-ended

Straight shank drills double-ended. Designation: Straight shank drills double-ended, Diameter range: 1.450 mm – 10.500 mm, TABLE_INFO_PASSON: [{"attr":"P",

68 vörur

551

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 5.500 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

91 vörur

637

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 11.500 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

4 vörur

638

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"}

2 vörur

639

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 10.000 mm – 26.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

5 vörur

579

Aircraft extension drill, 6 inches long

Aircraft extension drill, 6 inches long. Designation: Aircraft extension drill, 6 inches long, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"a

58 vörur

580

Aircraft extension drill, 12 inches long

Aircraft extension drill, 12 inches long. Designation: Aircraft extension drill, 12 inches long, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{

54 vörur

6403

Vent hole drill

Vent hole drill. Designation: Vent hole drill, Diameter range: 0.500 mm – 2.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"}

55 vörur

636

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.600 mm – 17.200 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

5 vörur

656

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 6.200 mm – 20.640 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

20 vörur

666

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

100 vörur

531

Taper pin drills

Taper pin drills. Designation: Taper pin drills, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 vörur

1839

Machine combination drill taps for ISO metric threads

Machine combination drill taps for ISO metric threads. Designation: Machine combination drill taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P",

7 vörur

4684

StepPower combination drill tap

StepPower combination drill tap. Designation: StepPower combination drill tap, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

6 vörur

303

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.160 mm – 1.950 mm, TABLE_INFO_PA

153 vörur

741

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 15.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

1 vörur

729

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 19.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr

14 vörur

716

Masonry drill

Masonry drill. Designation: Masonry drill, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

8 vörur

707

Carbide tipped spade drill

Carbide tipped spade drill. Designation: Carbide tipped spade drill, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

8 vörur

1149

Kevlar drill

Kevlar drill. Designation: Kevlar drill, Diameter range: 2.380 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

15 vörur

4100

Deburring fork

Deburring fork. Designation: Deburring fork, Diameter range: 2.10 - 2.34, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"

15 vörur

3899

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.100 mm – 3.000 mm, TABLE_INFO_PA

289 vörur

6408

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 vörur

5652

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.100 mm – 3.000 mm, TABLE_INFO_PA

27 vörur

6400

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

55 vörur

6405

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 vörur

6401

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

55 vörur

6412

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 vörur

750

Straight shank core drill

Straight shank core drill. Designation: Straight shank core drill, Diameter range: 3.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

11 vörur

701

Micro-precision drill AL without coolant ducts

Micro-precision drill AL without coolant ducts. Designation: Micro-precision drill AL without coolant ducts, Diameter range: 0.200 mm – 3.000 mm, TABLE_INF

65 vörur

739

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 4.500 mm – 11.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

5 vörur

738

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

6 vörur

4101

Deburring fork

Deburring fork. Designation: Deburring fork, Diameter range: 3.70 - 4.24, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"

15 vörur

8352

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

11 vörur

8371

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

11 vörur

2873

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

5 vörur

2883

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 vörur

2885

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

11 vörur

2857

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

8 vörur

8266

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

8 vörur

4526

CAT hydraulic chucks for internal cooling

CAT hydraulic chucks for internal cooling. Designation: CAT hydraulic chucks for internal cooling, Diameter range: 2.8 - 10.0, Internal diameter: 32.00 mm,

6 vörur

4576

Synchro tapping chuck SK

Synchro tapping chuck SK. Designation: Synchro tapping chuck SK, Diameter range: 2.5 - 5.0, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

7 vörur

28002

High feed milling cutter with indexable inserts, shell milling cutter

High feed milling cutter with indexable inserts, shell milling cutter. Designation: High feed milling cutter with indexable inserts, shell milling cutter,

6 vörur

4598

MAS/BT DC hydro expansion chuck with axial plane

MAS/BT DC hydro expansion chuck with axial plane. Designation: MAS/BT DC hydro expansion chuck with axial plane, Internal diameter: 18.00 mm, TABLE_INFO_PA

8 vörur

4577

Synchro tapping chuck MAS/BT for internal cooling

Synchro tapping chuck MAS/BT for internal cooling. Designation: Synchro tapping chuck MAS/BT for internal cooling, Diameter range: 6.0 - 16.0, Internal dia

7 vörur

28001

High feed milling cutter with indexable inserts, screw-in thread

High feed milling cutter with indexable inserts, screw-in thread. Designation: High feed milling cutter with indexable inserts, screw-in thread, Diameter r

9 vörur

4597

SK hydro expansion chuck, slim design 3°

SK hydro expansion chuck, slim design 3°. Designation: SK hydro expansion chuck, slim design 3°, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P

16 vörur

4601

Synchro tapping chuck HSK-A for internal cooling

Synchro tapping chuck HSK-A for internal cooling. Designation: Synchro tapping chuck HSK-A for internal cooling, Internal diameter: 32.00 mm, TABLE_INFO_PA

9 vörur

4561

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 10.00 mm, TABLE_INFO_

10 vörur

4564

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 14.

27 vörur

4563

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 18.00 mm, TABLE_INFO_

27 vörur

4560

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

10 vörur

4362

HSK-A milling arbor

HSK-A milling arbor. Designation: HSK-A milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

48 vörur

4562

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 32.

10 vörur

28487

Aluminium milling cutter with indexable inserts, screw-in threads

Aluminium milling cutter with indexable inserts, screw-in threads. Designation: Aluminium milling cutter with indexable inserts, screw-in threads, Diameter

3 vörur

28486

Aluminium milling cutter with indexable inserts, shell milling cutter

Aluminium milling cutter with indexable inserts, shell milling cutter. Designation: Aluminium milling cutter with indexable inserts, shell milling cutter,

4 vörur

4230

MAS/BT milling arbor

MAS/BT milling arbor. Designation: MAS/BT milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

31 vörur

25911

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 73.40 mm, EAN: 4049844612136, Indicator new/addition: New, Standard: Company std.

1 vörur

25931

Torx screwdriver

Torx screwdriver. Designation: Torx screwdriver, Total length: 67.00 mm, EAN: 4049844784345, Indicator new/addition: New, Standard: Company std.

3 vörur

4868

Socket

Socket. Designation: Socket, Total length: 22.00 mm, EAN: 4049844787308, Indicator new/addition: New

5 vörur

4869

Pull stud

Pull stud. Designation: Pull stud, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

6 vörur

4889

Pull stud

Pull stud. Designation: Pull stud, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

6 vörur

8170

Mounting key BT 800

Mounting key BT 800. Designation: Mounting key BT 800, EAN: 4049844972889, Indicator new/addition: New, Standard: Company std.

17 vörur

8192

Countersink holder with depth stop

Countersink holder with depth stop. Designation: Countersink holder with depth stop, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

1 vörur

8358

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 vörur

8357

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 vörur

8336

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

8359

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

11 vörur

8343

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 vörur

8344

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 vörur

8334

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 vörur

8335

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 vörur

8364

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 vörur

8366

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 vörur

25930

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

3 vörur

4490

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

12 vörur

4706

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

9 vörur

4707

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

8 vörur

4708

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

9 vörur

4704

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

9 vörur

4199

Holder for screw-in milling cutter HSK-A

Holder for screw-in milling cutter HSK-A. Designation: Holder for screw-in milling cutter HSK-A, Internal diameter: 8.50 mm, TABLE_INFO_PASSON: [{"attr":"P

24 vörur

25914

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

3 vörur

4703

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 vörur

4705

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

8 vörur

8276

Fluteless tap with coolant ducts for UNF threads

Fluteless tap with coolant ducts for UNF threads. Designation: Fluteless tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 vörur

8275

Fluteless tap with coolant ducts for UNC threads

Fluteless tap with coolant ducts for UNC threads. Designation: Fluteless tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 vörur

8327

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

9 vörur

8278

Fluteless tap with coolant ducts for UNF threads

Fluteless tap with coolant ducts for UNF threads. Designation: Fluteless tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 vörur

8313

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

8277

Fluteless tap with coolant ducts for UNC threads

Fluteless tap with coolant ducts for UNC threads. Designation: Fluteless tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 vörur

8325

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

11 vörur

8328

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

10 vörur

8314

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

8087

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 vörur

8274

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

20 vörur

8273

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

19 vörur

8326

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

10 vörur

8086

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 vörur

28401

Clamping screw

Clamping screw. Designation: Clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

3 vörur

6174

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 vörur

6176

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 vörur

6175

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 vörur

6924

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

19 vörur

28485

Aluminium milling cutter with indexable inserts, straight shank

Aluminium milling cutter with indexable inserts, straight shank. Designation: Aluminium milling cutter with indexable inserts, straight shank, Diameter ran

2 vörur

28000

High feed milling cutter with indexable inserts, straight shank Weldon

High feed milling cutter with indexable inserts, straight shank Weldon. Designation: High feed milling cutter with indexable inserts, straight shank Weldon

4 vörur

4525

Synchro tapping chuck with straight shank for internal cooling

Synchro tapping chuck with straight shank for internal cooling. Designation: Synchro tapping chuck with straight shank for internal cooling, Diameter range

8 vörur

4873

Interchangeable shank for modular fluteless taps

Interchangeable shank for modular fluteless taps. Designation: Interchangeable shank for modular fluteless taps, Diameter range: 9.000 mm – 18.000 mm, TABL

14 vörur

6121

Interchangeable shank for modular taps

Interchangeable shank for modular taps. Designation: Interchangeable shank for modular taps, Diameter range: 9.000 mm – 22.000 mm, TABLE_INFO_PASSON: [{"at

16 vörur

8351

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

7 vörur

8346

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 vörur

8341

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 vörur

8349

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

9 vörur

8347

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 vörur

8342

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 vörur

8348

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

9 vörur

8319

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

11 vörur

8350

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

4 vörur

8337

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 vörur

8333

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 vörur

8332

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 vörur

8355

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 vörur

8345

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 vörur

8339

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 vörur

8320

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

11 vörur

8321

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 vörur

8322

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

4 vörur

8338

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 vörur

8340

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

16 vörur

1904

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

10 vörur

8368

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 vörur

8370

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

7 vörur

8365

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 vörur

8362

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 vörur

2853

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

26 vörur

2863

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 vörur

4795

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

7 vörur

4796

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 vörur

313

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 vörur

4859

Machine tap for BSP threads

Machine tap for BSP threads. Designation: Machine tap for BSP threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 vörur

2993

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 vörur

2992

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

18 vörur

4798

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

17 vörur

805

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

12 vörur

6571

Fluteless machine tap for BSP-threads

Fluteless machine tap for BSP-threads. Designation: Fluteless machine tap for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

5 vörur

6573

Fluteless tap with coolant ducts for BSP threads

Fluteless tap with coolant ducts for BSP threads. Designation: Fluteless tap with coolant ducts for BSP threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

5 vörur

8264

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

5 vörur

8286

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

12 vörur

852

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

29 vörur

8265

Tap with coolant ducts for UNF threads

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

5 vörur

6567

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

4 vörur

6557

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 vörur

8282

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

17 vörur

6565

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

10 vörur

6568

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

12 vörur

6562

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 vörur

6572

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

9 vörur

8100

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"full

9 vörur

6555

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

17 vörur

8284

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

12 vörur

8280

Fluteless tap for EG/STI UNF threads

Fluteless tap for EG/STI UNF threads. Designation: Fluteless tap for EG/STI UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

12 vörur

8101

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"full

11 vörur

8269

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

4 vörur

6558

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

9 vörur

8092

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 vörur

8268

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

7 vörur

8272

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

9 vörur

8263

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

7 vörur

8090

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 vörur

6561

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 vörur

8288

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

17 vörur

8082

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 vörur

8080

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 vörur

8290

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

17 vörur

8354

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

25 vörur

8330

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

26 vörur

6570

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

9 vörur

8270

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

6 vörur

8289

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

17 vörur

8287

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

17 vörur

8285

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

13 vörur

8279

Fluteless tap for EG/STI UNC threads

Fluteless tap for EG/STI UNC threads. Designation: Fluteless tap for EG/STI UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

13 vörur

6559

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

11 vörur

6563

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

9 vörur

6564

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

11 vörur

8271

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

6 vörur

6560

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

17 vörur

6569

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

9 vörur

8262

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 vörur

6556

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 vörur

8093

Fluteless tap with coolant ducts for BSP threads

Fluteless tap with coolant ducts for BSP threads. Designation: Fluteless tap with coolant ducts for BSP threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

5 vörur

8283

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

13 vörur

8281

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

17 vörur

8091

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 vörur

6566

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 vörur

8088

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

11 vörur

8089

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

11 vörur

8081

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 vörur

8363

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

33 vörur

5691

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

44 vörur

5694

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 vörur

5693

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

42 vörur

5692

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

51 vörur

5682

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 vörur

5688

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

44 vörur

5164

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

51 vörur

5681

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 vörur

28504

SOLX indexable insert, single-sided external

SOLX indexable insert, single-sided external. Designation: SOLX indexable insert, single-sided external, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 vörur

28505

SOLX indexable insert, single-sided external

SOLX indexable insert, single-sided external. Designation: SOLX indexable insert, single-sided external, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 vörur

26605

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 vörur

28508

XOLX indexable insert single-sided, internal

XOLX indexable insert single-sided, internal. Designation: XOLX indexable insert single-sided, internal, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 vörur

26608

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

1 vörur

26607

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

1 vörur

26820

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

5 vörur

26824

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 vörur

26907

Cutting insert for drilling and boring

Cutting insert for drilling and boring. Designation: Cutting insert for drilling and boring, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 vörur

26812

Indexable insert for back turning

Indexable insert for back turning. Designation: Indexable insert for back turning, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},

5 vörur

26810

Indexable insert for radial grooving and longitudinal turning

Indexable insert for radial grooving and longitudinal turning. Designation: Indexable insert for radial grooving and longitudinal turning, TABLE_INFO_PASSO

3 vörur

26808

Indexable insert for radial grooving and longitudinal turning

Indexable insert for radial grooving and longitudinal turning. Designation: Indexable insert for radial grooving and longitudinal turning, TABLE_INFO_PASSO

3 vörur

26816

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 vörur

26609

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

1 vörur

26814

Indexable insert for back turning

Indexable insert for back turning. Designation: Indexable insert for back turning, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},

5 vörur

26826

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 vörur

27291

Cutting insert for drilling and boring

Cutting insert for drilling and boring. Designation: Cutting insert for drilling and boring, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 vörur

26818

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 vörur

26802

Indexable insert for radial grooving and copying

Indexable insert for radial grooving and copying. Designation: Indexable insert for radial grooving and copying, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

8 vörur

28509

XOLX indexable insert single-sided, internal

XOLX indexable insert single-sided, internal. Designation: XOLX indexable insert single-sided, internal, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 vörur

26822

Cutting insert

Interchangeable head for modular fluteless taps. Designation: Interchangeable head for modular fluteless taps, Diameter range: 12.000 mm – 24.000 mm, TABLE

14 vörur

495

90° Front/back deburrer

90° Front/back deburrer. Designation: 90° Front/back deburrer, Diameter range: 2.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

29 vörur

6166

Ball nose end mill G-Mold 55 B short shank

Ball nose end mill G-Mold 55 B short shank. Designation: Ball nose end mill G-Mold 55 B short shank, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON

6 vörur

8292

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

7 vörur

6578

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 vörur

6577

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 vörur

6581

Fluteless tap for ISO metric threads

9 vörur

8085

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

9 vörur

6829

Micro-precision milling cutter MicroMill µ 55 U

Micro-precision milling cutter MicroMill µ 55 U. Designation: Micro-precision milling cutter MicroMill µ 55 U, Diameter range: 0.200 mm – 3.000 mm, TABLE_I

45 vörur

28488

XDHT indexable insert

XDHT indexable insert. Designation: XDHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

7 vörur

6149

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

10 vörur

4477

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 vörur

6148

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

10 vörur

4880

Micro thread milling cutter for UNC/UNF threads

Micro thread milling cutter for UNC/UNF threads. Designation: Micro thread milling cutter for UNC/UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

24 vörur

6469

Ratio end mill set RF 100 Sharp extra short

Ratio end mill set RF 100 Sharp extra short. Designation: Ratio end mill set RF 100 Sharp extra short, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"at

1 vörur

6808

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

19 vörur

6167

Ball nose end mill G-Mold 55 B short shank

Ball nose end mill G-Mold 55 B short shank. Designation: Ball nose end mill G-Mold 55 B short shank, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON

6 vörur

6165

Ratio end mill RF 100 Sharp short shank

Ratio end mill RF 100 Sharp short shank. Designation: Ratio end mill RF 100 Sharp short shank, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"a

5 vörur

6468

Ratio end mill set RF 100 Sharp extra short

Ratio end mill set RF 100 Sharp extra short. Designation: Ratio end mill set RF 100 Sharp extra short, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"at

1 vörur

6164

Ratio end mill RF 100 Sharp short shank

Ratio end mill RF 100 Sharp short shank. Designation: Ratio end mill RF 100 Sharp short shank, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"a

5 vörur

6691

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

54 vörur

6163

Ratio end mill RF 100 Sharp extra short short shank

Ratio end mill RF 100 Sharp extra short short shank. Designation: Ratio end mill RF 100 Sharp extra short short shank, Diameter range: 0.800 mm – 3.000 mm,

11 vörur

6809

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

15 vörur

6692

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

52 vörur

9039

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 vörur

9033

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 vörur

9029

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

7 vörur

9031

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 vörur

9026

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 vörur

9051

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 vörur

9042

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 vörur

9047

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 vörur

9046

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 vörur

9030

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 vörur

9035

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 vörur

9045

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 vörur

9041

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 vörur

9034

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 vörur

9002

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 vörur

9014

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 vörur

9038

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 vörur

9010

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

10 vörur

9032

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 vörur

9006

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 vörur

9022

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

10 vörur

9037

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

11 vörur

9018

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 vörur

9043

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 vörur

9044

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 vörur

9036

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

12 vörur

9040

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

8 vörur

9197

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

42 vörur

9195

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 vörur

9194

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 vörur

9198

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

42 vörur

9193

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 vörur

9191

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P

33 vörur

9190

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P

22 vörur

9196

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 vörur

9192

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P

41 vörur

6060

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

64 vörur

5234

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

97 vörur

5689

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

97 vörur

5690

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

64 vörur

5812

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

93 vörur

9021

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

2 vörur

9027

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

2 vörur

9008

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

5 vörur

9012

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

5 vörur

9013

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

2 vörur

9015

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 1.000 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

3 vörur

9005

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

3 vörur

9050

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

1 vörur

9017

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

3 vörur

9019

End mill

End mill. Designation: End mill, Diameter range: 2.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"

2 vörur

9028

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

2 vörur

9048

End mill

End mill. Designation: End mill, Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"

2 vörur

9004

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

5 vörur

9011

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

2 vörur

9049

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 1.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

1 vörur

9003

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

6 vörur

9009

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

3 vörur

9025

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

2 vörur

9007

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

6 vörur

9020

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

3 vörur

9023

End mill

End mill. Designation: End mill, Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"

2 vörur

9024

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

5 vörur

9016

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

5 vörur

5639

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 vörur

5669

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 vörur

5641

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 vörur

5460

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 vörur

5023

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 vörur

5018

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 vörur

6061

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 vörur

5022

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 vörur

5642

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 vörur

5640

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 vörur

4605

Reduction sleeve for hydro synchro tapping chucks

Reduction sleeve for hydro synchro tapping chucks. Designation: Reduction sleeve for hydro synchro tapping chucks, Diameter range: 4.005 mm – 32.000 mm, In

84 vörur

4606

Reduction sleeve for hydro synchro tapping chucks

Reduction sleeve for hydro synchro tapping chucks. Designation: Reduction sleeve for hydro synchro tapping chucks, Diameter range: 12.000 mm – 32.000 mm, I

77 vörur

26700

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 vörur

26702

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

5 vörur

26703

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

5 vörur

26104

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 vörur

26701

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 vörur

26106

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

6 vörur

26105

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 vörur

26107

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 vörur

26202

Reinforced parting off blade without IC

Reinforced parting off blade without IC. Designation: Reinforced parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 vörur

26207

Reinforced parting off blade with IC

Reinforced parting off blade with IC. Designation: Reinforced parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

2 vörur

26203

Reinforced parting off blade without IC

Reinforced parting off blade without IC. Designation: Reinforced parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 vörur

26206

Reinforced parting off blade with IC

Reinforced parting off blade with IC. Designation: Reinforced parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

2 vörur

28902

Eccentric bushing

Eccentric bushing. Designation: Eccentric bushing, Diameter range: 20.000 mm – 40.000 mm, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val

4 vörur

6095

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 5.556 mm, TABLE_INFO_PASSON: [{"att

44 vörur

6094

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"att

55 vörur

6092

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

79 vörur

6091

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

79 vörur

6093

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 10.319 mm, TABLE_INFO_PASSON: [{"at

71 vörur

5633

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

35 vörur

5647

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

50 vörur

5024

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 0.900 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

26 vörur

5684

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 0.900 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

15 vörur

5020

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

35 vörur

5632

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

25 vörur

5026

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

29 vörur

5648

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

37 vörur

5021

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

38 vörur

5638

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

38 vörur

6075

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 6.500 mm, TABLE_INFO_PASSON: [{"attr":"P"

51 vörur

5685

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

77 vörur

5687

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

37 vörur

5686

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

50 vörur

5646

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

77 vörur

6072

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 vörur

6071

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 vörur

5637

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

29 vörur

6074

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 8.731 mm, TABLE_INFO_PASSON: [{"attr":"P"

64 vörur

6073

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 vörur

8154

Drill head holder BT 800

Drill head holder BT 800. Designation: Drill head holder BT 800, Diameter range: 25.000 - 25.499, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

66 vörur

6062

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

146 vörur

6063

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

146 vörur

6064

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

138 vörur

6407

Step ratio drill with coolant ducts

Step ratio drill with coolant ducts. Designation: Step ratio drill with coolant ducts, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P

16 vörur

7052

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

127 vörur

6591

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [

124 vörur

6589

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

191 vörur

8512

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 vörur

8514

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 vörur

8518

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

148 vörur

8513

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 vörur

6590

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

191 vörur

6592

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [

124 vörur

4870

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

18 vörur

6939

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 3.500 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

22 vörur

6459

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

83 vörur

6461

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

83 vörur

6457

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

77 vörur

6065

Flat bottom drill with coolant ducts, 3-fluted

Flat bottom drill with coolant ducts, 3-fluted. Designation: Flat bottom drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_IN

125 vörur

6066

Flat bottom drill with coolant ducts, 3-fluted

Flat bottom drill with coolant ducts, 3-fluted. Designation: Flat bottom drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_IN

125 vörur

6951

Circular milling cutter full radius

Circular milling cutter full radius. Designation: Circular milling cutter full radius, Diameter range: 3.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"attr":"P

13 vörur

6815

Ball nose end mill G-Mold µ 65 B

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19 vörur

6949

Circular milling cutter corner chamfer

Circular milling cutter corner chamfer. Designation: Circular milling cutter corner chamfer, Diameter range: 3.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"at

12 vörur

6950

Circular milling cutter corner radius

Circular milling cutter corner radius. Designation: Circular milling cutter corner radius, Diameter range: 7.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"attr

11 vörur

6172

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

13 vörur

6713

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 vörur

6173

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

13 vörur

6932

Circular segment milling cutter G-Mold 55 CS

Circular segment milling cutter G-Mold 55 CS. Designation: Circular segment milling cutter G-Mold 55 CS, Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_P

5 vörur

8221

Ratio end mill RF 100 AL µF

Ratio end mill RF 100 AL µF. Designation: Ratio end mill RF 100 AL µF, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

14 vörur

8220

Ratio end mill RF 100 AL µF

Ratio end mill RF 100 AL µF. Designation: Ratio end mill RF 100 AL µF, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

14 vörur

6931

Circular segment milling cutter G-Mold 55 CS

Circular segment milling cutter G-Mold 55 CS. Designation: Circular segment milling cutter G-Mold 55 CS, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_P

4 vörur

6933

Circular segment milling cutter G-Mold 55 CS

Circular segment milling cutter G-Mold 55 CS. Designation: Circular segment milling cutter G-Mold 55 CS, Diameter range: 10.000 mm – 16.000 mm, TABLE_INFO_

3 vörur

8222

Ratio end mill RF 100 AL µF

Ratio end mill RF 100 AL µF. Designation: Ratio end mill RF 100 AL µF, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

14 vörur

6930

End mill CR 200 for fibre-reinforced plastics

End mill CR 200 for fibre-reinforced plastics. Designation: End mill CR 200 for fibre-reinforced plastics, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO

9 vörur

6923

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

14 vörur

6552

Micro HPC milling cutter

Micro HPC milling cutter. Designation: Micro HPC milling cutter, Diameter range: 0.300 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 vörur

6456

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 0.800 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

135 vörur

6458

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

119 vörur

6550

Micro HPC milling cutter

Micro HPC milling cutter. Designation: Micro HPC milling cutter, Diameter range: 0.300 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 vörur

6925

End mill CR 200 for fibre-reinforced plastics

End mill CR 200 for fibre-reinforced plastics. Designation: End mill CR 200 for fibre-reinforced plastics, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO

9 vörur

6460

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

119 vörur

6938

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 0.800 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

33 vörur

8151

Drill head holder BT 800

Drill head holder BT 800. Designation: Drill head holder BT 800, Diameter range: 25.000 - 25.499, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

66 vörur

8152

Drill head holder BT 800

Drill head holder BT 800. Designation: Drill head holder BT 800, Diameter range: 25.000 - 25.499, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

66 vörur

8150

Drill head holder BT 800

Drill head holder BT 800. Designation: Drill head holder BT 800, Diameter range: 25.000 - 25.499, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

66 vörur

8153

Drill head holder BT 800

Drill head holder BT 800. Designation: Drill head holder BT 800, Diameter range: 25.000 - 25.499, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

66 vörur

28503

Indexable insert drills GMD

Indexable insert drills GMD. Designation: Indexable insert drills GMD, Diameter range: 14.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

63 vörur

28500

Indexable insert drills GMD

Indexable insert drills GMD. Designation: Indexable insert drills GMD, Diameter range: 14.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

63 vörur

28502

Indexable insert drills GMD

Indexable insert drills GMD. Designation: Indexable insert drills GMD, Diameter range: 14.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

63 vörur

28501

Indexable insert drills GMD

Indexable insert drills GMD. Designation: Indexable insert drills GMD, Diameter range: 14.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

63 vörur

6130

Machine reamer

Machine reamer. Designation: Machine reamer, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial

1 vörur

1676

High-performance reamer, fixed-size series

High-performance reamer, fixed-size series. Designation: High-performance reamer, fixed-size series, Diameter range: 1.950 mm – 20.050 mm, TABLE_INFO_PASSO

308 vörur

1685

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

75 vörur

1686

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

75 vörur

1675

High-performance reamer, fixed-size series

High-performance reamer, fixed-size series. Designation: High-performance reamer, fixed-size series, Diameter range: 1.950 mm – 20.050 mm, TABLE_INFO_PASSO

308 vörur

4196

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 3.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

21 vörur

4195

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 3.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

21 vörur

7285

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 vörur

7286

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 vörur

8148

Promotion – Modular drill with interchangeable head BT 800 3xD

Promotion – Modular drill with interchangeable head BT 800 3xD. Designation: Promotion – Modular drill with interchangeable head BT 800 3xD, Diameter range

161 vörur

8149

Promotion – Modular drill with interchangeable head BT 800 5xD

Promotion – Modular drill with interchangeable head BT 800 5xD. Designation: Promotion – Modular drill with interchangeable head BT 800 5xD, Diameter range

161 vörur

9500

Jobber drill StepPower

Jobber drill StepPower. Designation: Jobber drill StepPower, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

57 vörur

6162

Micro-precision drill without coolant ducts with short shank

Micro-precision drill without coolant ducts with short shank. Designation: Micro-precision drill without coolant ducts with short shank, Diameter range: 0.

55 vörur

6161

Micro-precision drill without coolant ducts with short shank

Micro-precision drill without coolant ducts with short shank. Designation: Micro-precision drill without coolant ducts with short shank, Diameter range: 0.

55 vörur

6488

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

52 vörur

7053

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.800 mm – 3.000 mm, TABLE_INFO_PA

45 vörur

6489

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 vörur

6487

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

66 vörur

6493

Micro-precision drill XL with coolant ducts

Micro-precision drill XL with coolant ducts. Designation: Micro-precision drill XL with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASS

47 vörur

6491

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 vörur

6490

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 vörur

6494

Micro-precision drill XL with coolant ducts

Micro-precision drill XL with coolant ducts. Designation: Micro-precision drill XL with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASS

47 vörur

8525

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

61 vörur

8526

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 vörur

8528

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 vörur

8527

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 vörur

6045

Straight-fluted drill, 4-fluted VB 100 P

Straight-fluted drill, 4-fluted VB 100 P. Designation: Straight-fluted drill, 4-fluted VB 100 P, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [

77 vörur

6044

Straight-fluted drill, 4-fluted VB 100 P

Straight-fluted drill, 4-fluted VB 100 P. Designation: Straight-fluted drill, 4-fluted VB 100 P, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [

77 vörur

6497

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 vörur

DEMO-3420

End mill 4-flute, 45 degree helix

Universal 4-flute end mill for roughing and finishing of steel and stainless steel. Unequal helix reduces chatter.

5 vörur

DEMO-RT100U

Machine tap RT 100 U, universal

Universal machine tap for through and blind holes in a wide range of materials. Spiral point and spiral flute versions available.

5 vörur

DEMO-6497

Solid carbide drill 5xD, internal coolant

High-performance solid carbide drill for steel and cast iron. Four-facet point, internal coolant channels, TiAlN coating. Suitable for depths up to 5xD.

5 vörur