← Vörulisti
Bentu á myndina til að stækka
3705
Ratio end mill RF 40
Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093387668, Type: N, Helix angle: 35/38, Back rake angle: 11, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: B, Corner design: Schneidecke 90°, Feed direction: with drilling
Tæknilegar upplýsingar
- EAN
- 4031093387668
- Type
- N
- Designation
- Ratio end mill RF 40
- Helix angle
- 35/38
- Corner design
- Schneidecke 90°
- Diameter range
- 8.000 mm – 25.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 4
Mál og pöntunarnúmer
| Pöntunarnúmer | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Fáanleiki | Óska eftir verði |
|---|---|---|---|---|---|---|---|
| 3705 14.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 14.00 mm | Samkvæmt beiðni | |
| 3705 16.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Samkvæmt beiðni | |
| 3705 8.000 | 23.00 mm | 40.00 mm | 69.00 mm | 10.00 mm | 8.00 mm | Samkvæmt beiðni | |
| 3705 18.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 18.00 mm | Samkvæmt beiðni | |
| 3705 10.000 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Samkvæmt beiðni | |
| 3705 12.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Samkvæmt beiðni | |
| 3705 20.000 | 45.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Samkvæmt beiðni | |
| 3705 25.000 | 54.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | Samkvæmt beiðni |