Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093376686, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

技術仕様

EAN: 4031093376686
Type: N
Surface: bright
Designation: Ball nose end mill (4-fluted)
Helix angle: 30
Diameter range: 4.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
3306 10.000	32.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	要問い合わせ
3306 14.001	44.88 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	要問い合わせ
3306 18.001	54.56 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	要問い合わせ
3306 14.000	38.88 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	要問い合わせ
3306 4.000	15.00 mm	28.00 mm	50.00 mm	4.00 mm	4.00 mm	要問い合わせ
3306 16.000	46.72 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	要問い合わせ
3306 5.000	18.00 mm	28.00 mm	50.00 mm	5.00 mm	5.00 mm	要問い合わせ
3306 8.000	27.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	要問い合わせ
3306 12.000	37.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	要問い合わせ
3306 20.000	56.40 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	要問い合わせ
3306 18.000	48.56 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	要問い合わせ
3306 6.000	19.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	要問い合わせ