製品カタログ

全工具の技術データ、寸法、在庫状況をご覧いただけます。

3401 / 3401

2840

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

6 製品

2845

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

7 製品

2841

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

3 製品

2866

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

5 製品

2890

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 製品

3954

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 製品

3955

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 製品

881

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

7 製品

4719

Shrink fit extension

Shrink fit extension. Designation: Shrink fit extension, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

51 製品

1053

Chamfer collar

Chamfer collar. Designation: Chamfer collar, Nominal diameter: 1.05 mm, Total length: 23.80 mm, Internal diameter: 5.00 mm, EAN: 4031093279741

6 製品

4401

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M5 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 製品

4204

PCD cartridge

PCD cartridge. Designation: PCD cartridge, Diameter range: 30.000 mm – 30.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

3 製品

5699

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M5 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 製品

3191

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 15.875 mm, TABLE_INFO_PASSON: [{"at

7 製品

3158

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

9 製品

3101

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"at

6 製品

3157

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

33 製品

3160

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

9 製品

3159

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

33 製品

6841

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"at

6 製品

6842

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"at

6 製品

4419

Cooling adapter

Cooling adapter. Designation: Cooling adapter, Diameter range: 3 - 5, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"

1 製品

1055

Chamfer collar

Chamfer collar. Designation: Chamfer collar, Total length: 1.00 mm, EAN: 4031093279888

2 製品

1947

Round indexable insert

Round indexable insert. Designation: Round indexable insert, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

4 製品

1437

Woodruff keys

Woodruff keys. Designation: Woodruff keys, Diameter range: 13.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

6 製品

25172

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

1 製品

25173

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

1 製品

25181

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 製品

25115

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

13 製品

25221

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

3 製品

25189

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 製品

25205

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 製品

25220

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

3 製品

25196

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 製品

25165

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 製品

25188

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 製品

25213

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 製品

25157

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 製品

25197

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 製品

25180

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 製品

25114

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

13 製品

25236

Cutting insert for Torx

Cutting insert for Torx. Designation: Cutting insert for Torx, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

6 製品

25132

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 製品

25140

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 製品

25074

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

27 製品

25149

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 製品

25133

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 製品

25148

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 製品

25125

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 製品

25141

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 製品

25106

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

22 製品

25067

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 製品

25156

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 製品

25082

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

30 製品

25212

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 製品

25500

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

25164

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 製品

25091

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

13 製品

25228

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

5 製品

25051

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 製品

25124

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 製品

25107

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

22 製品

25050

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 製品

25059

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

25232

Cutting insert for internal square

Cutting insert for internal square. Designation: Cutting insert for internal square, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

5 製品

25812

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

4 製品

25066

Cutting insert for boring out and profiling

28 製品

25756

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 製品

25820

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

4 製品

25833

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

25780

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 製品

25773

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 製品

25889

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

25508

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

25797

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 製品

25764

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 製品

25902

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

2 製品

25864

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

28 製品

25840

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

25856

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

7 製品

25709

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 製品

25749

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

25716

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

36 製品

25873

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

25748

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

25517

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 製品

25757

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 製品

25841

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

25058

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

51 製品

25880

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 製品

25509

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

25832

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

25700

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 製品

25740

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

36 製品

25865

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

28 製品

25708

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 製品

25717

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

36 製品

25516

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 製品

25701

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 製品

25848

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

25872

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

25741

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

36 製品

25888

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 製品

4072

Chamfer collar

Chamfer collar. Designation: Chamfer collar, Total length: 11.00 mm, EAN: 4031093647847

2 製品

4664

MAS/BT hydro expansion chuck

MAS/BT hydro expansion chuck. Designation: MAS/BT hydro expansion chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

1 製品

4327

Synchro tapping chuck HSK-A

Synchro tapping chuck HSK-A. Designation: Synchro tapping chuck HSK-A, Diameter range: 4.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

5 製品

4604

MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A

4 製品

4939

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 製品

4663

SK hydro expansion chuck

SK hydro expansion chuck. Designation: SK hydro expansion chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

1 製品

4619

SK hydro expansion chuck

SK hydro expansion chuck. Designation: SK hydro expansion chuck, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

3 製品

4298

MQL synchro tapping chuck HSK-A for manual tool change

MQL synchro tapping chuck HSK-A for manual tool change. Designation: MQL synchro tapping chuck HSK-A for manual tool change, Diameter range: 4.5 - 20.0, TA

2 製品

4949

Coolant supply set for conventional cooling

Coolant supply set for conventional cooling. Designation: Coolant supply set for conventional cooling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

4241

Threaded pin for hydro clamping chucks

Threaded pin for hydro clamping chucks. Designation: Threaded pin for hydro clamping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

6 製品

4328

Quick change tapping chuck HSK-A

Quick change tapping chuck HSK-A. Designation: Quick change tapping chuck HSK-A, Diameter range: M3.5 - M20, Internal diameter: 19.00 mm, TABLE_INFO_PASSON

2 製品

4946

Tool setting fixture

Tool setting fixture. Designation: Tool setting fixture, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

4 製品

4602

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for automatic tool change cycle

4 製品

4615

Adapter for M contour clamping sets

Adapter for M contour clamping sets. Designation: Adapter for M contour clamping sets, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

7 製品

4765

CAT shrink fit chuck

CAT shrink fit chuck. Designation: CAT shrink fit chuck, Internal diameter: 12.70 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

9 製品

4790

MAS/BT DC shrink fit chuck with axial plane

MAS/BT DC shrink fit chuck with axial plane. Designation: MAS/BT DC shrink fit chuck with axial plane, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"a

11 製品

4603

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for automatic tool change cycle

4 製品

4513

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 3.60 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

10 製品

4206

Quick change tapping chuck adaptor

Quick change tapping chuck adaptor. Designation: Quick change tapping chuck adaptor, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

21 製品

4958

4-point clamping set

4-point clamping set. Designation: 4-point clamping set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

6 製品

4557

Component part for clamping set

Component part for clamping set. Designation: Component part for clamping set, EAN: 4031093574532, Standard: Company std.

7 製品

4741

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 20.

82 製品

4213

SK hydro expansion chuck with increased clamping force

SK hydro expansion chuck with increased clamping force. Designation: SK hydro expansion chuck with increased clamping force, Internal diameter: 10.00 mm, T

16 製品

4764

Shrink fit chuck

Shrink fit chuck. Designation: Shrink fit chuck, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

34 製品

4622

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Diameter range: 6 - 16, Internal diameter: 1.60 mm, TABLE_INFO_PASSON: [{"attr":"P

83 製品

4728

MAS/BT shrink fit chuck

MAS/BT shrink fit chuck. Designation: MAS/BT shrink fit chuck, Internal diameter: 32.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-

10 製品

4739

MAS/BT shrink fit chuck

MAS/BT shrink fit chuck. Designation: MAS/BT shrink fit chuck, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

52 製品

4620

MAS/BT hydro expansion chuck

MAS/BT hydro expansion chuck. Designation: MAS/BT hydro expansion chuck, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 製品

4554

Clamping set PowerClamp

Clamping set PowerClamp. Designation: Clamping set PowerClamp, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

7 製品

4209

MQL hydro expansion chuck for manual tool change cylce HSK-A

MQL hydro expansion chuck for manual tool change cylce HSK-A. Designation: MQL hydro expansion chuck for manual tool change cylce HSK-A, Internal diameter:

46 製品

4613

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 18.00 mm, TABLE_INFO_

200 製品

4222

CAT milling arbor

CAT milling arbor. Designation: CAT milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

10 製品

4940

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 製品

4930

MQL clamping set

MQL clamping set. Designation: MQL clamping set, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

9 製品

4915

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 390.00 mm, EAN: 4031093391610, Standard: Company std.

10 製品

4341

MQL synchro tapping chuck HSK-A for automatic tool change cycle

MQL synchro tapping chuck HSK-A for automatic tool change cycle. Designation: MQL synchro tapping chuck HSK-A for automatic tool change cycle, Diameter ran

4 製品

4330

MQL synchro tapping chuck HSK-A for automatic tool change cycle

MQL synchro tapping chuck HSK-A for automatic tool change cycle. Designation: MQL synchro tapping chuck HSK-A for automatic tool change cycle, Diameter ran

5 製品

4612

MQL hydro expansion chuck for automatic tool change cycle HSK-A

MQL hydro expansion chuck for automatic tool change cycle HSK-A. Designation: MQL hydro expansion chuck for automatic tool change cycle HSK-A, Internal dia

119 製品

4511

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 製品

4361

Shell milling arbor

Shell milling arbor. Designation: Shell milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

22 製品

4611

MQL hydro expansion chuck for manual tool change cylce HSK-A

MQL hydro expansion chuck for manual tool change cylce HSK-A. Designation: MQL hydro expansion chuck for manual tool change cylce HSK-A, Internal diameter:

119 製品

4924

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

112 製品

4508

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 製品

4623

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Diameter range: 20, Internal diameter: 3.40 mm, TABLE_INFO_PASSON: [{"attr":"P","v

83 製品

4210

MQL hydro expansion chuck for automatic tool change cycle HSK-A

MQL hydro expansion chuck for automatic tool change cycle HSK-A. Designation: MQL hydro expansion chuck for automatic tool change cycle HSK-A, Internal dia

46 製品

4221

MAS/BT hydro expansion chuck with increased clamping force

MAS/BT hydro expansion chuck with increased clamping force. Designation: MAS/BT hydro expansion chuck with increased clamping force, Internal diameter: 20.

25 製品

4614

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 16.

200 製品

4981

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 273.00 mm, EAN: 4049844495418, Standard: Company std.

1 製品

4988

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 200.00 mm, EAN: 4049844300897, Standard: Company std., Form: E

1 製品

4966

Torque wrench set

Torque wrench set. Designation: Torque wrench set, EAN: 4049844227118, Standard: Company std.

2 製品

4987

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 100.00 mm, EAN: 4049844300903

1 製品

4989

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 514.00 mm, EAN: 4049844300873, Standard: Company std.

2 製品

4972

Mounting adapter

Mounting adapter. Designation: Mounting adapter, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

3 製品

4990

Tool setting fixture

Tool setting fixture. Designation: Tool setting fixture, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

8 製品

4979

Coolant supply set for conventional cooling

Coolant supply set for conventional cooling. Designation: Coolant supply set for conventional cooling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

6021

Clamping strip for tool heads

Clamping strip for tool heads. Designation: Clamping strip for tool heads, Total length: 79.00 mm, EAN: 4031093571388

14 製品

6155

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Total length: 10.00 mm, EAN: 4031093393553

20 製品

6522

Clamping claw

Clamping claw. Designation: Clamping claw, Total length: 11.00 mm, EAN: 4049844400979

8 製品

4962

Company std.

Company std.. Total length: 1.00 mm, EAN: 4031093567046

6 製品

3168

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

3177

Slot drill GA 200 A (3-fluted)

Slot drill GA 200 A (3-fluted). Designation: Slot drill GA 200 A (3-fluted), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

6 製品

3175

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 6.350 mm – 15.875 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

4 製品

3086

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.590 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

8 製品

3171

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 製品

3151

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 製品

3149

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 製品

19955

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 製品

3088

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

3174

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 製品

19954

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

19953

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 製品

3173

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 製品

3170

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

3172

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 製品

3087

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 製品

3148

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 製品

3147

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 製品

3092

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 製品

19958

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 製品

3169

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 製品

19952

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

3146

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 製品

4240

MAS/BT NC drilling chuck with internal cooling

MAS/BT NC drilling chuck with internal cooling. Designation: MAS/BT NC drilling chuck with internal cooling, Diameter range: 1.0 - 16, TABLE_INFO_PASSON: [

3 製品

4087

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

2 製品

4233

Whistle Notch side lock holder MAS/BT

Whistle Notch side lock holder MAS/BT. Designation: Whistle Notch side lock holder MAS/BT, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val

20 製品

4317

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

31 製品

4329

Weldon side lock holders HSK-A

Weldon side lock holders HSK-A. Designation: Weldon side lock holders HSK-A, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

58 製品

4232

Weldon side lock holders HSK-A

Weldon side lock holders HSK-A. Designation: Weldon side lock holders HSK-A, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

58 製品

4322

Whistle Notch side lock holders ISO taper

Whistle Notch side lock holders ISO taper. Designation: Whistle Notch side lock holders ISO taper, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr"

20 製品

4334

Whistle Notch side lock holders HSK-A

Whistle Notch side lock holders HSK-A. Designation: Whistle Notch side lock holders HSK-A, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","va

48 製品

4234

Weldon side lock holders MAS/BT

Weldon side lock holders MAS/BT. Designation: Weldon side lock holders MAS/BT, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

29 製品

4497

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

80 製品

4333

Whistle Notch side lock holders HSK-C

Whistle Notch side lock holders HSK-C. Designation: Whistle Notch side lock holders HSK-C, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","va

29 製品

5496

PCD slot drill (3-fluted)

PCD slot drill (3-fluted). Designation: PCD slot drill (3-fluted), Diameter range: 14.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

8 製品

5493

PCD slot drill (2-fluted)

PCD slot drill (2-fluted). Designation: PCD slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

19 製品

4824

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

88 製品

4853

Whistle Notch side lock holders ISO taper

Whistle Notch side lock holders ISO taper. Designation: Whistle Notch side lock holders ISO taper, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr"

30 製品

4745

HSK holder

HSK holder. Designation: HSK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

6 製品

4761

HSK holder

HSK holder. Designation: HSK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

6 製品

4763

Swivel compartments

Swivel compartments. Designation: Swivel compartments, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

Mounting key for parting off blade. Designation: Mounting key for parting off blade, Total length: 120.00 mm, EAN: 4049844372719, Standard: Company std.

1 製品

25922

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 58.00 mm, EAN: 4049844372702, Standard: Company std.

1 製品

25904

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 90.60 mm, EAN: 4049844209961, Standard: Company std.

2 製品

25900

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

1 製品

3003

Milling arbor

Milling arbor. Designation: Milling arbor, Diameter range: 63.000 mm – 250.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},

2 製品

28901

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 70.00 mm, EAN: 4049844933378, Standard: Company std.

4 製品

3002

Milling arbor

Milling arbor. Designation: Milling arbor, Diameter range: 100.000 mm – 250.000 mm, Internal diameter: 40.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

5 製品

4060

Threaded pin

Threaded pin. Designation: Threaded pin, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

2 製品

4573

Retaining nut

Retaining nut. Designation: Retaining nut, Diameter range: 1.0 - 7.0, Total length: 16.20 mm, EAN: 4049844478770, Standard: Company std.

1 製品

4744

SK holder

SK holder. Designation: SK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

3 製品

4759

Control unit SpeedCooler

Control unit SpeedCooler. Designation: Control unit SpeedCooler, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"}

2 製品

4747

SpeedCooler cooling system

SpeedCooler cooling system. Designation: SpeedCooler cooling system, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

3 製品

4762

SK holder

SK holder. Designation: SK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

3 製品

4926

Pull stud SK

Pull stud SK. Designation: Pull stud SK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

3 製品

4767

Coolant protection

Coolant protection. Designation: Coolant protection, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","

1 製品

4927

Pull stud BT

Pull stud BT. Designation: Pull stud BT, Internal diameter: 8.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

7 製品

4947

HSK cleaning cap

HSK cleaning cap. Designation: HSK cleaning cap, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

5 製品

4925

Pull stud SK

Pull stud SK. Designation: Pull stud SK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

3 製品

4624

Assembly tool

Assembly tool. Designation: Assembly tool, Total length: 132.00 mm, Internal diameter: 34.00 mm, EAN: 4049844115491, Standard: Company std.

6 製品

4919

MQL adjusting screw

MQL adjusting screw. Designation: MQL adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

15 製品

4913

Clamping key

Clamping key. Designation: Clamping key, Total length: 210.00 mm, EAN: 4031093391559, Standard: Company std., Form: C

15 製品

4917

Torx socket set

Torx socket set. Designation: Torx socket set, Total length: 25.00 mm, EAN: 4031093647816, Standard: Company std.

11 製品

4928

Pull stud BT

Pull stud BT. Designation: Pull stud BT, Internal diameter: 2.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

8 製品

4910

Socket

Socket. Designation: Socket, Total length: 60.00 mm, EAN: 4031093574693, Standard: Company std.

6 製品

4937

MQL HSK-A adjusting screw

MQL HSK-A adjusting screw. Designation: MQL HSK-A adjusting screw, Diameter range: 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

34 製品

4555

Threaded spindle

Threaded spindle. Designation: Threaded spindle, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

7 製品

4911

Socket

Socket. Designation: Socket, Total length: 171.00 mm, Internal diameter: 14.00 mm, EAN: 4031093554312, Standard: Company std.

6 製品

4773

Cooling adapter

Cooling adapter. Designation: Cooling adapter, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

5 製品

4909

Socket

Socket. Designation: Socket, Total length: 280.00 mm, EAN: 4031093391443, Standard: DIN 6368

7 製品

4306

Retaining nut

Retaining nut. Designation: Retaining nut, Total length: 24.00 mm, EAN: 4031093659550, Standard: DIN ISO 15488, Form: D

32 製品

4960

Torx Plus interchangeable blade

Torx Plus interchangeable blade. Designation: Torx Plus interchangeable blade, Total length: 175.00 mm, EAN: 4049844225275, Standard: Company std.

5 製品

4994

Roller spanner for precision collet holders

Roller spanner for precision collet holders. Designation: Roller spanner for precision collet holders, Total length: 185.00 mm, Internal diameter: 16.00 mm

1 製品

4995

Roller spanner insert for torque wrench

Roller spanner insert for torque wrench. Designation: Roller spanner insert for torque wrench, Total length: 45.00 mm, Internal diameter: 16.00 mm, EAN: 40

1 製品

4992

Taper insert

Taper insert. Designation: Taper insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

7 製品

4986

Assembly tool

Assembly tool. Designation: Assembly tool, Total length: 37.80 mm, EAN: 4049844219809, Standard: Company std.

6 製品

4963

Assembly tool

Assembly tool. Designation: Assembly tool, Total length: 60.00 mm, EAN: 4031093555593

7 製品

6009

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 3.3 - 11.8, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

1 製品

6153

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 31.500 mm – 31.500 mm, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

8 製品

6154

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 50.000 mm – 50.000 mm, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

4 製品

6152

Clamping sleeve

6 製品

25023

Round shank holder, clamping screw above for Tornos machine type

Round shank holder, clamping screw above, four clamping surfaces. Designation: Round shank holder, clamping screw above, four clamping surfaces, TABLE_INFO

8 製品

3467

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

13 製品

3466

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

21 製品

3703

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

21 製品

3704

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 製品

6108

Clamping nut

Clamping nut. Designation: Clamping nut, Total length: 10.80 mm, EAN: 4049844400306, Standard: Company std.

2 製品

6107

Clamping screw

Clamping screw. Designation: Clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

2 製品

1003

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 製品

1085

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

5 製品

1188

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 製品

1072

Clamping screw for chamfer collars

Clamping screw for chamfer collars. Designation: Clamping screw for chamfer collars, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

3 製品

1067

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 製品

1082

Tap with coolant ducts for UNF threads

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

10 製品

1064

Machine tap for UNJF-threads

Machine tap for UNJF-threads. Designation: Machine tap for UNJF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 製品

1194

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

6 製品

1071

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

6 製品

1139

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

4 製品

1060

Machine tap for UNJF-threads

Machine tap for UNJF-threads. Designation: Machine tap for UNJF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 製品

1156

VBMX indexable insert

VBMX indexable insert. Designation: VBMX indexable insert, Diameter range: 12.001 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

2 製品

1002

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 製品

1200

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

13 製品

1201

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 製品

1059

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 製品

1152

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 製品

1063

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 製品

1098

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

4 製品

1061

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 製品

1144

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

8 製品

1090

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 製品

1068

Machine tap for UNJF-threads

Machine tap for UNJF-threads. Designation: Machine tap for UNJF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 製品

1091

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 製品

1057

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 製品

1007

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

15 製品

1142

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

4 製品

1065

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 製品

1286

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 製品

1285

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 製品

1289

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 製品

1818

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

7 製品

1893

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 製品

1293

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 製品

1575

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

1290

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 製品

1578

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 製品

1288

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 製品

1294

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 製品

1287

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 製品

1691

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

6 製品

1577

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

25912

Cylinder head screw

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 製品

2922

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

6 製品

3908

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 製品

3996

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 製品

375

Twist drill with coolant duct, flute length DIN 1870

Twist drill with coolant duct, flute length DIN 1870. Designation: Twist drill with coolant duct, flute length DIN 1870, Diameter range: 11.110 mm – 34.130

18 製品

3911

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 製品

3999

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 製品

3907

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 製品

4070

PCD HSC face milling cutter

PCD HSC face milling cutter. Designation: PCD HSC face milling cutter, Diameter range: 32.000 mm – 80.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

5 製品

3997

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 製品

3910

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 製品

3994

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 製品

371

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 11.000 mm – 26.990 mm,

19 製品

3906

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

12 製品

318

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 製品

3993

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 製品

4071

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

26 製品

3995

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 製品

376

Twist drill with coolant duct, flute length DIN 1870

Twist drill with coolant duct, flute length DIN 1870. Designation: Twist drill with coolant duct, flute length DIN 1870, Diameter range: 13.000 mm – 29.000

6 製品

4059

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

6 製品

3909

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

12 製品

370

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 11.000 mm – 34.920 mm,

32 製品

4058

Adjustment bolt

Adjustment bolt. Designation: Adjustment bolt, Total length: 7.00 mm, EAN: 4049844052185, Standard: Company std.

9 製品

3992

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 製品

3998

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 製品

4207

Washer

Washer. Designation: Washer, Total length: 2.00 mm, EAN: 4049844229761, Standard: Company std.

1 製品

4388

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 製品

4959

Component part for clamping set

Component part for clamping set. Designation: Component part for clamping set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 製品

4373

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

5 製品

4376

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 製品

4124

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 製品

4375

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 製品

4938

Adjusting screw for shrink fit chucks

Adjusting screw for shrink fit chucks. Designation: Adjusting screw for shrink fit chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

6 製品

4879

Torx Plus bit insert

Torx Plus bit insert. Designation: Torx Plus bit insert, Total length: 25.00 mm, EAN: 4049844710856, Standard: Company std.

5 製品

4646

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

4637

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 製品

4165

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 製品

4305

Adjusting screw for synchro tapping chucks

Adjusting screw for synchro tapping chucks. Designation: Adjusting screw for synchro tapping chucks, Internal diameter: 4.10 mm, TABLE_INFO_PASSON: [{"attr

15 製品

4931

Component part for clamping set

Component part for clamping set. Designation: Component part for clamping set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 製品

4389

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 製品

4374

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

5 製品

4391

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 製品

4918

Cleaning mandrel

Cleaning mandrel. Designation: Cleaning mandrel, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

11 製品

4914

Cleaning mandrels

Cleaning mandrels. Designation: Cleaning mandrels, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

14 製品

4905

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

12 製品

4466

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 製品

4902

Adjusting screw for HSK-A/HSK-E collet holders

Adjusting screw for HSK-A/HSK-E collet holders. Designation: Adjusting screw for HSK-A/HSK-E collet holders, Diameter range: 2.5 - 6, TABLE_INFO_PASSON: [{

15 製品

4649

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 製品

4394

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 製品

4166

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

2 製品

4901

Adjusting screw for HSK-C collet holders

Adjusting screw for HSK-C collet holders. Designation: Adjusting screw for HSK-C collet holders, Diameter range: 6.0 - 10.0, TABLE_INFO_PASSON: [{"attr":"P

16 製品

4908

Milling cutter retaining screw

Milling cutter retaining screw. Designation: Milling cutter retaining screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

7 製品

4651

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

4425

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

4431

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

4125

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 製品

4120

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 製品

4907

Cylinder head screw

Cylinder head screw. Designation: Cylinder head screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

12 製品

4650

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

4904

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

15 製品

4456

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

4468

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 製品

4430

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

4634

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

4621

MQL HSK-A adjusting screw

MQL HSK-A adjusting screw. Designation: MQL HSK-A adjusting screw, Internal diameter: 4.10 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

71 製品

4683

Machine tap for Rc (BSPT) threads

Machine tap for Rc (BSPT) threads. Designation: Machine tap for Rc (BSPT) threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"a

6 製品

4900

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

7 製品

4903

Clamping screw

Clamping screw. Designation: Clamping screw, Diameter range: 25, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{

12 製品

4239

BT morse taper holder

BT morse taper holder. Designation: BT morse taper holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

12 製品

4906

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Diameter range: 8.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

9 製品

4122

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 製品

4993

Plug insert

Plug insert. Designation: Plug insert, Total length: 1.00 mm, EAN: 4031093567183, Standard: Company std.

3 製品

4980

Cleaning mandrels

Cleaning mandrels. Designation: Cleaning mandrels, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

4 製品

4976

Centrifugal ring

Centrifugal ring. Designation: Centrifugal ring, Internal diameter: 50.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

6 製品

4977

Adjusting screw for shrink fit chucks

Adjusting screw for shrink fit chucks. Designation: Adjusting screw for shrink fit chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

8 製品

4961

Pressure ball screw

Pressure ball screw. Designation: Pressure ball screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

8 製品

515

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

208 製品

5497

Machine tap for UN-threads set

Machine tap for UN-threads set. Designation: Machine tap for UN-threads set, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

1 製品

5521

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

119 製品

530

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

203 製品

5522

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

119 製品

5559

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 製品

5567

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 製品

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

5755

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

3 製品

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 製品

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 製品

6127

Threaded ring

Threaded ring. Designation: Threaded ring, Diameter range: 5.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"

3 製品

5754

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Internal diameter: 3.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

4 製品

5722

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 製品

6022

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

3 製品

6128

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

27 製品

5766

Sealing plug

Sealing plug. Designation: Sealing plug, Diameter range: 13.0 - 20.0, Total length: 37.00 mm, Shank length: 20.00 mm, EAN: 4049844349605, Standard: Company

36 製品

6007

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSO

170 製品

5751

Moulded steady rest bushing for two-fluted drills

Moulded steady rest bushing for two-fluted drills. Designation: Moulded steady rest bushing for two-fluted drills, Diameter range: 11.980 - 12.499, TABLE_I

84 製品

5749

Steady rest bushing for single and two-fluted drills

Steady rest bushing for single and two-fluted drills. Designation: Steady rest bushing for single and two-fluted drills, Diameter range: 4.750 - 4.999, Int

180 製品

5750

Moulded steady rest bushing for single-fluted gun drills

Moulded steady rest bushing for single-fluted gun drills. Designation: Moulded steady rest bushing for single-fluted gun drills, Diameter range: 5.500 - 5.

158 製品

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

5767

Moulded steady rest bushing for single-fluted gun drills

Moulded steady rest bushing for single-fluted gun drills. Designation: Moulded steady rest bushing for single-fluted gun drills, Diameter range: 21.510 - 2

106 製品

6435

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 製品

6292

VBMT indexable insert

VBMT indexable insert. Designation: VBMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

1 製品

6431

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 製品

6276

CNMU indexable insert

CNMU indexable insert. Designation: CNMU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"full"},{"attr":"K","val":"partial"

2 製品

6275

CNMU indexable insert

CNMU indexable insert. Designation: CNMU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 製品

6342

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

6294

CNMG indexable insert

CNMG indexable insert. Designation: CNMG indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"

3 製品

6394

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

6362

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 製品

6396

TCHT indexable insert

6 製品

6427

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

13 製品

6393

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

6360

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

6370

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

6358

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

6345

TCHT indexable insert

CCHW indexable insert. Designation: CCHW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

6338

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

6323

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 製品

6381

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 製品

6349

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 製品

6319

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

6206

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

13 製品

6346

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 製品

6359

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

6365

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 製品

6355

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

11 製品

6277

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

13 製品

6296

CNMU indexable insert

CNMU indexable insert. Designation: CNMU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 製品

6336

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 製品

6339

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

6282

CCHX indexable insert

CCHX indexable insert. Designation: CCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

13 製品

6369

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

6385

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 製品

6352

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 製品

6375

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 製品

6341

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

6390

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

6327

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 製品

6350

SCHW indexable insert

SCHW indexable insert. Designation: SCHW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

14 製品

6211

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

12 製品

6304

SCHX indexable insert

8 製品

6340

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

6284

CCHX indexable insert

CCHX indexable insert. Designation: CCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

13 製品

6325

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 製品

6209

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 製品

6297

CNMG indexable insert

CNMG indexable insert. Designation: CNMG indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 製品

6207

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

11 製品

6317

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 製品

6386

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

13 製品

6291

VBMT indexable insert

VBMT indexable insert. Designation: VBMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 製品

6351

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 製品

6604

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 製品

6531

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 製品

6603

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 製品

6527

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

13 製品

6621

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 製品

6598

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

6656

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 製品

6693

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

13 製品

6535

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 製品

6607

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

6613

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 製品

6620

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

7 製品

6609

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 製品

6686

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 製品

6664

CCHX indexable insert

CCHX indexable insert. Designation: CCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 製品

6641

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 製品

6648

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 製品

6625

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 製品

6687

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 製品

6632

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 製品

6608

TCHT indexable insert

7 製品

6629

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 製品

6606

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

6655

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"parti

7 製品

6611

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 製品

6640

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 製品

6661

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

9 製品

6622

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 製品

6627

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 製品

6647

SCHT indexable insert

11 製品

6660

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"parti

11 製品

6628

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 製品

6635

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 製品

6639

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 製品

6680

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 製品

6618

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 製品

6630

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 製品

6610

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 製品

6688

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 製品

6624

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 製品

6597

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 製品

6679

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 製品

6626

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 製品

6600

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

6616

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7466

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 製品

7718

VBMW indexable insert

VBMW indexable insert. Designation: VBMW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 製品

7715

RNGN indexable insert

RNGN indexable insert. Designation: RNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 製品

7849

DCGW indexable insert

2 製品

7467

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 製品

7735

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 製品

7472

TNGN indexable insert

TNGN indexable insert. Designation: TNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 製品

7745

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7839

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 製品

7721

VBMW indexable insert

VBMW indexable insert. Designation: VBMW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 製品

7749

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 製品

7764

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

3 製品

7675

SCGW indexable insert

SCGW indexable insert. Designation: SCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

7 製品

7455

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 製品

7471

TNGN indexable insert

TNGN indexable insert. Designation: TNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 製品

7743

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

7689

CNGN indexable insert

CNGN indexable insert. Designation: CNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

6907

SNHQ indexable insert

SNHQ indexable insert. Designation: SNHQ indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 製品

7671

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7759

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 製品

7760

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 製品

7844

SCGT indexable insert with chip breaker

SCGT indexable insert with chip breaker. Designation: SCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 製品

7838

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7799

CCGT indexable insert

CCGT indexable insert. Designation: CCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 製品

7811

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7477

CNGN indexable insert

CNGN indexable insert. Designation: CNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

4 製品

7754

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

3 製品

7847

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 製品

7736

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 製品

7771

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7758

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 製品

7713

CNGW indexable insert

CNGW indexable insert. Designation: CNGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 製品

7748

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7757

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 製品

7767

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

7688

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 製品

7755

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

3 製品

7805

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

7672

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7761

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 製品

6911

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 製品

7773

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7834

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 製品

7740

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{

4 製品

7676

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7798

CPGW indexable insert

CPGW indexable insert. Designation: CPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 製品

7816

VBGW indexable insert

6 製品

7827

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

7452

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 製品

7820

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7716

SCGN indexable insert

SCGN indexable insert. Designation: SCGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 製品

7445

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 製品

7450

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 製品

7823

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7802

CCGT indexable insert

CCGT indexable insert. Designation: CCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 製品

7746

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7845

SCGT indexable insert with chip breaker

SCGT indexable insert with chip breaker. Designation: SCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 製品

7776

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

7807

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7768

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

7842

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 製品

7663

TPGW indexable insert

TPGW indexable insert. Designation: TPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

9 製品

7763

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

3 製品

7815

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

7708

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 製品

7670

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7818

VBGW indexable insert

6 製品

7808

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

6876

90° Chamfering milling cutter SpyroTec

90° Chamfering milling cutter SpyroTec. Designation: 90° Chamfering milling cutter SpyroTec, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"at

6 製品

7456

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 製品

7752

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

7665

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 製品

7709

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 製品

7775

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

7723

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 製品

6908

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 製品

7821

VBGW indexable insert

7 製品

7804

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

7772

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7846

SCGT indexable insert with chip breaker

SCGT indexable insert with chip breaker. Designation: SCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 製品

7828

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

7666

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

8 製品

7664

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

8 製品

7830

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 製品

7744

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 製品

7829

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 製品

7765

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

3 製品

7770

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7673

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7756

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

3 製品

7447

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 製品

7813

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 製品

7803

CCGT indexable insert

CCGT indexable insert. Designation: CCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 製品

7762

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 製品

7446

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 製品

7668

CPGW indexable insert

CPGW indexable insert. Designation: CPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 製品

6910

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 製品

7769

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7810

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 製品

7448

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 製品

879

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 製品

909

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 製品

4397

Collet holder HSK-E

Collet holder HSK-E. Designation: Collet holder HSK-E, Diameter range: 1.0 - 13.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

12 製品

4475

Collet holder HSK-E

Collet holder HSK-E. Designation: Collet holder HSK-E, Diameter range: 1.0 - 7.5, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

8 製品

4476

Collet holder HSK-A

Collet holder HSK-A. Designation: Collet holder HSK-A, Diameter range: 1.0 - 7.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

8 製品

4303

Collet holder HSK-C

Collet holder HSK-C. Designation: Collet holder HSK-C, Diameter range: 1.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

12 製品

4323

Collet holder, sealed version HSK-C

Collet holder, sealed version HSK-C. Designation: Collet holder, sealed version HSK-C, Diameter range: 0.5 - 13.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-

12 製品

4304

Collet holder HSK-A

Collet holder HSK-A. Designation: Collet holder HSK-A, Diameter range: 3.0 - 26.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

23 製品

4245

Collet holder MAS/BT

Collet holder MAS/BT. Designation: Collet holder MAS/BT, Diameter range: 1.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

8 製品

4324

Collet holder, sealed version HSK-A

Collet holder, sealed version HSK-A. Designation: Collet holder, sealed version HSK-A, Diameter range: 3.0 - 26.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-

21 製品

4318

SK collet holder

SK collet holder. Designation: SK collet holder, Diameter range: 2.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

11 製品

4827

SK collet holder

SK collet holder. Designation: SK collet holder, Diameter range: 0.5 - 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

27 製品

3099

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 9.525 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val

4 製品

3100

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 9.525 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

5 製品

3188

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"at

7 製品

3078

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

7 製品

3081

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 製品

3184

Roughing end mill GS 100 A (coarse teeth)

Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON:

7 製品

3115

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 7.938 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":

6 製品

3114

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.175 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 製品

6484

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

10 製品

3091

Multi-tooth end mill with corner radius GH 100 U

Multi-tooth end mill with corner radius GH 100 U. Designation: Multi-tooth end mill with corner radius GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABL

20 製品

3322

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 製品

6485

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

11 製品

3166

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 製品

3161

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

33 製品

3165

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

33 製品

3186

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"at

7 製品

3182

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P",

6 製品

3162

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

8 製品

3178

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 製品

3082

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

3179

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 製品

3080

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

13 製品

3077

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 製品

3180

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 製品

3340

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":

17 製品

3113

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 製品

3181

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 製品

4257

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 製品

4265

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

10 製品

4260

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 製品

4251

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 製品

4264

Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

4253

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 12.700 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","va

4 製品

4259

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 製品

3705

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 製品

3432

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 16.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

5 製品

4258

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 製品

4256

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

4255

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PAS

9 製品

4266

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 製品

4263

Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

4252

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 製品

3876

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

17 製品

4250

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 製品

4254

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PAS

10 製品

4262

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 製品

3429

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 製品

7649

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 製品

7644

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 製品

6891

Ratio end mill RF 100 5 Speed

7 製品

6892

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

29 製品

6462

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"

10 製品

4326

Synchro tapping chuck with straight shank

Synchro tapping chuck with straight shank. Designation: Synchro tapping chuck with straight shank, Diameter range: 4.0 - 20.0, TABLE_INFO_PASSON: [{"attr":

2 製品

4342

Quick change tapping chuck

Quick change tapping chuck. Designation: Quick change tapping chuck, Diameter range: M3 - M12, Internal diameter: 31.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

2 製品

4340

Quick change tapping chuck

Quick change tapping chuck. Designation: Quick change tapping chuck, Diameter range: M3 - M12, Internal diameter: 31.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

2 製品

1083

Twist drill set AeroX

Twist drill set AeroX. Designation: Twist drill set AeroX, Diameter range: 1.0 - 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

3 製品

3145

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

5 製品

3144

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 製品

3142

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 製品

3143

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 製品

3452

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 製品

3836

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

3458

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

26 製品

3453

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

3460

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

3459

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 製品

3694

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 製品

3456

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 26.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

24 製品

1199

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

118 製品

1259

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

107 製品

1146

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.400 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

129 製品

3504

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 125.000 mm, Internal diameter: 22.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 製品

3176

Quadrant milling cutter

Quadrant milling cutter. Designation: Quadrant milling cutter, Diameter range: 10.000 mm – 56.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr"

11 製品

3342

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

12 製品

3346

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

20 製品

3343

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

20 製品

3347

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

15 製品

3433

End mill

End mill. Designation: End mill, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 製品

3431

End mill

End mill. Designation: End mill, Diameter range: 3.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

20 製品

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

2 製品

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"a

5 製品

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 6.0 - 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

5 製品

3530

Side and face cutters

Side and face cutters. Designation: Side and face cutters, Diameter range: 50.000 mm – 200.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr"

35 製品

3579

Woodruff cutter

Woodruff cutter. Designation: Woodruff cutter, Diameter range: 4.500 mm – 45.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

21 製品

3580

Woodruff cutter

Woodruff cutter. Designation: Woodruff cutter, Diameter range: 4.500 mm – 45.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

24 製品

3700

End mill

End mill. Designation: End mill, Diameter range: 10.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val"

9 製品

1131

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

44 製品

1132

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

40 製品

4105

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 30.00 - 31.99, TABLE_INFO_PASS

28 製品

4106

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 製品

4110

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

84 製品

4107

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 製品

4109

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

87 製品

4108

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 製品

5242

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 34.51 - 37.50, TABLE_INFO_PASS

28 製品

5243

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 37.51 - 40.50, TABLE_INFO_PASS

28 製品

5248

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 20.01 - 21.00, TABLE_INFO_PASS

28 製品

4208

HPC extension

HPC extension. Designation: HPC extension, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

5 製品

2016

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 製品

2014

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 製品

1261

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

1 製品

1135

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

9 製品

2045

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

20 製品

1134

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

9 製品

129

Twist drill with shank dia. 25.4 mm

Twist drill with shank dia. 25.4 mm. Designation: Twist drill with shank dia. 25.4 mm, Diameter range: 25.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"

15 製品

128

Twist drill with shank dia. 16.0 mm

Twist drill with shank dia. 16.0 mm. Designation: Twist drill with shank dia. 16.0 mm, Diameter range: 16.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"

29 製品

1263

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"

9 製品

1224

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 30.160 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"att

28 製品

1221

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

102 製品

1223

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

106 製品

1222

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 30.160 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

22 製品

136

Twist drill with shank dia. 25.4 mm

Twist drill with shank dia. 25.4 mm. Designation: Twist drill with shank dia. 25.4 mm, Diameter range: 25.000 mm – 39.000 mm, TABLE_INFO_PASSON: [{"attr":"

9 製品

2047

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

97 製品

2048

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

90 製品

2458

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.400 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

149 製品

2997

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

106 製品

374

Twist drill with coolant duct, flute length DIN 1870

Twist drill with coolant duct, flute length DIN 1870. Designation: Twist drill with coolant duct, flute length DIN 1870, Diameter range: 11.000 mm – 34.000

23 製品

351

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 31.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"

10 製品

3570

T-slot end mill

T-slot end mill. Designation: T-slot end mill, Diameter range: 12.500 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

9 製品

363

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 7.000 mm – 46.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

56 製品

336

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

209 製品

330

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.450 mm – 35.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

173 製品

381

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

7 製品

5676

82° Countersink SpyroTec set

82° Countersink SpyroTec set. Designation: 82° Countersink SpyroTec set, Diameter range: 6.35 - 19.05, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

1 製品

5538

90° countersink SpyroTec set

90° countersink SpyroTec set. Designation: 90° countersink SpyroTec set, Diameter range: 6.30 - 20.50, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

2 製品

5539

90° countersink SpyroTec set

90° countersink SpyroTec set. Designation: 90° countersink SpyroTec set, Diameter range: 6.30 - 25.00, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

2 製品

5680

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

8 製品

5677

82° Countersink SpyroTec set

82° Countersink SpyroTec set. Designation: 82° Countersink SpyroTec set, Diameter range: 6.35 - 19.05, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

1 製品

620

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 9.520 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

36 製品

608

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 9.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val

68 製品

6503

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

8 製品

610

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

192 製品

6034

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

111 製品

572

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

104 製品

622

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

262 製品

661

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 7.940 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

34 製品

663

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 10.500 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val"

22 製品

658

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

209 製品

659

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.500 mm – 15.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

218 製品

9000

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

61 製品

3120

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 16.000 mm – 63.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

18 製品

3121

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 16.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

9 製品

3118

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 10.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

12 製品

3117

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 10.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

14 製品

3440

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 13.000 mm – 45.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

13 製品

3663

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 製品

3695

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 製品

3664

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

24 製品

3651

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

23 製品

3451

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 製品

417

Replacement blades for hand reamers

Replacement blades for hand reamers. Designation: Replacement blades for hand reamers, Diameter range: 24.00 - 27.50, TABLE_INFO_PASSON: [{"attr":"P","val"

20 製品

4524

MQL synchro tapping chuck with straight shanks

MQL synchro tapping chuck with straight shanks. Designation: MQL synchro tapping chuck with straight shanks, Diameter range: 6.0 - 16.0, Internal diameter:

2 製品

5492

PCD slot drill (2-fluted)

PCD slot drill (2-fluted). Designation: PCD slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

17 製品

5495

PCD slot drill (3-fluted)

PCD slot drill (3-fluted). Designation: PCD slot drill (3-fluted), Diameter range: 14.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

8 製品

3535

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 製品

3537

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 製品

234

Twist drills-Set

108 製品

892

Nut tap for ISO metric threads

Nut tap for ISO metric threads. Designation: Nut tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

108 製品

2017

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 製品

2015

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 製品

1262

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 35.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"

63 製品

1319

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 6.600 mm – 21.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

5 製品

1147

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.600 mm – 21.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

1136

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

9 製品

1228

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

142 製品

1323

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 6.000 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

5 製品

1133

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

9 製品

1326

90° Countersink

208 製品

2459

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

125 製品

244

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 10.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

3 製品

2498

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

105 製品

221

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.450 mm – 17.100 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

41 製品

250

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

243

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 8.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

4 製品

2461

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

113 製品

246

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 6.700 mm – 25.250 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

19 製品

242

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

5 製品

251

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 76.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

47 製品

247

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 3.200 mm – 55.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

47 製品

252

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

35 製品

238

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

225

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 22.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

116 製品

248

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 6.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

26 製品

228

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 22.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

101 製品

224

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.650 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

144 製品

253

Twist drill with coolant duct, flute length to company standard

Twist drill with coolant duct, flute length to company standard. Designation: Twist drill with coolant duct, flute length to company standard, Diameter ran

38 製品

229

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 8.000 mm – 59.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

44 製品

249

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

2457

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

94 製品

2460

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

109 製品

255

Twist drill with coolant duct, flute length to company standard

Twist drill with coolant duct, flute length to company standard. Designation: Twist drill with coolant duct, flute length to company standard, Diameter ran

38 製品

254

Twist drill with coolant duct, flute length to company standard

Twist drill with coolant duct, flute length to company standard. Designation: Twist drill with coolant duct, flute length to company standard, Diameter ran

46 製品

227

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.750 mm – 29.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

92 製品

240

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 18.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

76 製品

269

Twist drill with coolant duct, short

Twist drill with coolant duct, short. Designation: Twist drill with coolant duct, short, Diameter range: 9.920 mm – 23.020 mm, TABLE_INFO_PASSON: [{"attr":

50 製品

226

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.320 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

388 製品

223

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.300 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

400 製品

2462

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

59 製品

245

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 2.000 mm – 101.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

400 製品

268

Twist drill with shank dia. 12.7 mm

Twist drill with shank dia. 12.7 mm. Designation: Twist drill with shank dia. 12.7 mm, Diameter range: 13.000 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"

30 製品

2456

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

126 製品

305

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.200 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

400 製品

308

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.320 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

205 製品

286

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 2.000 mm – 3.150 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

1 製品

270

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 10.000 mm – 49.000 mm,

40 製品

299

Twist drill extra-long

13 製品

271

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 10.000 mm – 47.000 mm,

58 製品

317

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.500 mm – 29.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

183 製品

3187

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 160.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

6 製品

329

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.400 mm – 48.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

400 製品

3185

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 125.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

6 製品

487

Counterbore with pilots for tapping size holes

Counterbore with pilots for tapping size holes. Designation: Counterbore with pilots for tapping size holes, Diameter range: 18.000 mm – 33.000 mm, TABLE_I

3 製品

437

90° Countersink for medium tolerances

90° Countersink for medium tolerances. Designation: 90° Countersink for medium tolerances, Diameter range: 6.600 mm – 21.500 mm, TABLE_INFO_PASSON: [{"attr

6 製品

481

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 25.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

2 製品

396

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

94 製品

472

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 6.300 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

6 製品

4636

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 製品

3654

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 100.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

4 製品

3749

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 100.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 製品

463

Counterbore with interchangeable pilots

Counterbore with interchangeable pilots. Designation: Counterbore with interchangeable pilots, Diameter range: 15.000 mm – 63.000 mm, TABLE_INFO_PASSON: [{

8 製品

345

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 3.000 mm – 67.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

152 製品

471

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 16.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 製品

483

Counterbore fixed pilots for medium tolerances

Counterbore fixed pilots for medium tolerances. Designation: Counterbore fixed pilots for medium tolerances, Diameter range: 6.000 mm – 20.000 mm, TABLE_IN

8 製品

4648

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 製品

477

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 15.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

17 製品

325

Counterbore fixed pilots for medium tolerances

Counterbore fixed pilots for medium tolerances. Designation: Counterbore fixed pilots for medium tolerances, Diameter range: 6.000 mm – 18.000 mm, TABLE_IN

6 製品

328

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 25.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

5 製品

438

90° Countersink for tapping size holes

90° Countersink for tapping size holes. Designation: 90° Countersink for tapping size holes, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"at

6 製品

379

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

474

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

4 製品

479

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 16.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

1 製品

326

Counterbore with pilots for tapping size holes

Counterbore with pilots for tapping size holes. Designation: Counterbore with pilots for tapping size holes, Diameter range: 6.000 mm – 20.000 mm, TABLE_IN

7 製品

480

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 16.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

1 製品

380

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

378

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

486

Counterbore fixed pilots for medium tolerances

Counterbore fixed pilots for medium tolerances. Designation: Counterbore fixed pilots for medium tolerances, Diameter range: 18.000 mm – 40.000 mm, TABLE_I

6 製品

475

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 16.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 製品

482

Counterbore with pilots for fine tolerances

Counterbore with pilots for fine tolerances. Designation: Counterbore with pilots for fine tolerances, Diameter range: 2.200 mm – 20.000 mm, TABLE_INFO_PAS

13 製品

324

Counterbore with pilots for fine tolerances

Counterbore with pilots for fine tolerances. Designation: Counterbore with pilots for fine tolerances, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PAS

7 製品

485

Counterbore with pilots for fine tolerances

Counterbore with pilots for fine tolerances. Designation: Counterbore with pilots for fine tolerances, Diameter range: 18.000 mm – 40.000 mm, TABLE_INFO_PA

6 製品

470

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

4 製品

327

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 5.000 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

16 製品

390

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 3.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"at

25 製品

478

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

4 製品

436

90° Countersink for fine tolerances

90° Countersink for fine tolerances. Designation: 90° Countersink for fine tolerances, Diameter range: 2.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P

12 製品

484

Counterbore with pilots for tapping size holes

Counterbore with pilots for tapping size holes. Designation: Counterbore with pilots for tapping size holes, Diameter range: 6.000 mm – 20.000 mm, TABLE_IN

7 製品

473

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 16.000 mm – 80.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

8 製品

476

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 4.300 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

261 製品

549

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

339 製品

501

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 32.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

230 製品

5673

60° Countersink SpyroTec set

60° Countersink SpyroTec set. Designation: 60° Countersink SpyroTec set, Diameter range: 6.30 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr"

1 製品

5537

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

208 製品

559

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

7 製品

5672

60° Countersink SpyroTec set

60° Countersink SpyroTec set. Designation: 60° Countersink SpyroTec set, Diameter range: 6.30 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr"

Twist drill. Designation: Twist drill, Diameter range: 7.940 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

30 製品

568

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 製品

566

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 8.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

19 製品

565

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 6.000 mm – 17.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

15 製品

5678

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 製品

563

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 6.000 mm – 7.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M"

4 製品

560

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 2.370 mm – 5.610 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"

75 製品

567

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

16 製品

562

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 2.400 mm – 5.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

17 製品

553

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

247 製品

617

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 15.870 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

220 製品

6008

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSO

161 製品

605

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.200 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

353 製品

629

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

100 製品

6006

Twist drill with standard shank

Twist drill with standard shank. Designation: Twist drill with standard shank, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

161 製品

5736

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

12 製品

6005

Twist drill with standard shank

Twist drill with standard shank. Designation: Twist drill with standard shank, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

236 製品

645

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 9.520 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

53 製品

592

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 12.700 mm – 28.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

19 製品

587

Centre drills with flat

Centre drills with flat. Designation: Centre drills with flat, Diameter range: 1.600 mm – 12.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

10 製品

589

Centre drills with flat

Centre drills with flat. Designation: Centre drills with flat, Diameter range: 1.600 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 製品

586

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

11 製品

614

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

11 製品

582

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 12.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

14 製品

613

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

12 製品

591

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

8 製品

583

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 12.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

14 製品

588

Centre drills with flat

Centre drills with flat. Designation: Centre drills with flat, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

9 製品

6504

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 6.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 10.200 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

105 製品

657

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.500 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

194 製品

662

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 29.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"

24 製品

655

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 4.200 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

42 製品

665

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.300 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

63 製品

654

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 3.000 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

139 製品

652

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

241 製品

668

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

184 製品

664

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.500 mm – 17.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

182 製品

667

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.500 mm – 22.220 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

227 製品

653

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.500 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

319 製品

985

Set Hand taps for UNF-threads

Set Hand taps for UNF-threads. Designation: Set Hand taps for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

17 製品

981

Set Hand taps for UNC-threads

Set Hand taps for UNC-threads. Designation: Set Hand taps for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

20 製品

650

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

8 製品

954

Set Hand taps for BSW-threads

Set Hand taps for BSW-threads. Designation: Set Hand taps for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

17 製品

882

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

14 製品

958

Set Hand taps for BSP-threads

Set Hand taps for BSP-threads. Designation: Set Hand taps for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

13 製品

861

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

33 製品

884

Set Hand taps for ISO metric fine threads

Set Hand taps for ISO metric fine threads. Designation: Set Hand taps for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

51 製品

9651

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

175 製品

904

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

10 製品

672

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.800 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

118 製品

3669

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

19 製品

3698

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

12 製品

3690

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

21 製品

3706

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 16.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

5 製品

3650

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

15 製品

3668

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 製品

3660

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":

17 製品

6756

Roughing end mill GS 80 (fine teeth)

Roughing end mill GS 80 (fine teeth). Designation: Roughing end mill GS 80 (fine teeth), Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

13 製品

511

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.300 mm – 17.460 mm, TABLE_INFO_PASSO

38 製品

3550

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

1 製品

3517

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 製品

3519

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

1897

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 製品

1900

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 製品

1898

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 製品

1890

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 製品

1249

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 製品

1891

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 製品

1991

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 製品

1252

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

1087

Machine tap for NPT-threads

Machine tap for NPT-threads. Designation: Machine tap for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

6 製品

1988

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 製品

1907

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 製品

1989

Machine tap for UNF-threads

12 製品

1838

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

9 製品

1980

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

8 製品

1906

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

7 製品

1871

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 製品

1246

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 製品

1872

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

14 製品

1837

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

5 製品

1979

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

11 製品

1875

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 製品

1892

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

4 製品

1977

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

11 製品

196

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 製品

1088

Machine tap for NPT-threads

Machine tap for NPT-threads. Designation: Machine tap for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 製品

8888

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

13 製品

1915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

1084

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 製品

8889

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

13 製品

1914

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

1917

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 製品

1981

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 製品

1918

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 製品

1876

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 製品

2086

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 製品

2087

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

13 製品

2439

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 製品

2511

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 製品

2425

Machine tap for ISO metric threads

4 製品

2513

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 製品

2868

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

10 製品

2898

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 製品

2854

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

8 製品

2881

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

9 製品

2791

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 製品

2710

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 製品

2889

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 製品

2876

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 製品

2891

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 製品

2870

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

13 製品

2941

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 製品

2790

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 製品

2859

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

11 製品

2895

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

5 製品

2874

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 製品

2899

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 製品

2986

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 製品

2990

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 製品

2984

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 製品

2985

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 製品

2880

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

9 製品

2942

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 製品

2850

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

2858

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 製品

2862

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 製品

2846

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 製品

2872

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 製品

2851

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

2844

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

8 製品

4660

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

12 製品

4657

Tap with coolant ducts for UNF threads

10 製品

3984

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 製品

3964

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 製品

3982

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 製品

3925

Machine tap for UNC-threads

9 製品

4433

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

4685

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 製品

3938

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

10 製品

4392

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

17 製品

4155

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 製品

3950

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 製品

319

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 製品

3916

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 製品

4424

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

4883

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 製品

4423

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

4412

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

14 製品

3923

Machine tap for UN-threads

Machine tap for UN-threads. Designation: Machine tap for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

22 製品

3986

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 製品

3980

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 製品

3926

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 製品

347

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

10 製品

4645

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 製品

3961

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 製品

4035

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

11 製品

4428

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

3981

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 製品

4036

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

11 製品

3901

Machine tap for UNC-threads

15 製品

3971

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 製品

3914

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 製品

3928

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 製品

3932

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 製品

4415

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 製品

4407

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

34 製品

4627

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 製品

4644

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 製品

4429

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

4625

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 製品

3945

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 製品

4416

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

14 製品

3917

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 製品

4411

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 製品

4886

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

31 製品

4570

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 製品

4406

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

25 製品

4654

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 製品

4887

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 製品

4569

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 製品

3915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 製品

3931

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 製品

3900

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

3904

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 製品

362

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 製品

3912

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 製品

4422

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

3937

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

10 製品

3922

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 製品

4639

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 製品

4410

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

26 製品

3930

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 製品

3927

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 製品

4331

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 製品

4633

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

3967

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 製品

3983

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 製品

4670

Machine tap for ISO metric threads

28 製品

4154

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 製品

4153

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 製品

3965

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 製品

4638

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 製品

4034

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

11 製品

4885

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

40 製品

4409

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

30 製品

4881

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

34 製品

3947

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 製品

4405

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

31 製品

4218

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

25 製品

3970

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 製品

4408

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

29 製品

4671

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 製品

4630

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 製品

3920

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 製品

3918

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 製品

4402

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

39 製品

3919

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 製品

5570

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 製品

5569

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 製品

5568

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 製品

5563

Machine tap for ISO metric threads

9 製品

5596

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

9 製品

5561

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 製品

5564

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 製品

5554

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 製品

5557

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 製品

5551

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 製品

5595

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 製品

5572

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 製品

5558

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 製品

5552

Machine tap for ISO metric threads

10 製品

5733

Machine tap for ISO metric threads

6 製品

779

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 製品

797

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 製品

795

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 製品

807

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 製品

788

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 製品

733

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 製品

787

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

4 製品

796

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 製品

817

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 製品

791

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 製品

783

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 製品

799

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 製品

811

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

810

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

803

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 製品

800

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 製品

786

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

794

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 製品

792

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

3 製品

785

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 製品

816

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

809

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

812

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

789

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

790

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 製品

804

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

813

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 製品

734

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 製品

801

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 製品

808

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 製品

814

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 製品

806

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 製品

778

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 製品

784

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

16 製品

815

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

28 製品

870

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 製品

869

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

4 製品

946

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 製品

836

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 製品

997

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 製品

979

Machine tap for PG-threads

Machine tap for PG-threads. Designation: Machine tap for PG-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

9 製品

912

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 製品

876

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 製品

950

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 製品

980

Machine tap for PG-threads

Machine tap for PG-threads. Designation: Machine tap for PG-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

6 製品

1069

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

5 製品

853

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val"

13 製品

911

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 製品

947

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 製品

844

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

889

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

12 製品

992

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

819

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

15 製品

823

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

15 製品

821

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 製品

888

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 製品

908

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

17 製品

873

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

11 製品

825

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 製品

914

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

849

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 製品

857

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

14 製品

949

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 製品

839

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

16 製品

835

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 製品

820

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

916

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 製品

847

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 製品

917

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 製品

822

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 製品

995

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 製品

998

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 製品

991

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

20 製品

915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

31 製品

973

Machine tap for NPT-threads

Machine tap for NPT-threads. Designation: Machine tap for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 製品

890

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 製品

930

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 製品

837

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

826

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 製品

843

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

9 製品

931

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

12 製品

846

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 製品

948

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

20 製品

838

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 製品

865

Tap for ISO metric threads

Tap for ISO metric threads. Designation: Tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

3 製品

824

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 製品

845

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

13 製品

945

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

18 製品

932

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

16 製品

913

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 製品

993

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

13 製品

848

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 製品

818

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

25 製品

996

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

10 製品

172

Dies for BSW threads

Dies for BSW threads. Designation: Dies for BSW threads, EAN: 4031093007955, Cutting material: HSS, Surface: bright, Cutting direction: Right-hand, ISO P:

4 製品

512

Twist drill with reinforced straight shank

92 製品

1028

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.500 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 製品

1020

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 製品

1024

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.100 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

4 製品

1243

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 5.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

96 製品

1242

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

123 製品

1025

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

124 製品

1027

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 19.500 mm, TABLE_INFO_PAS

29 製品

1798

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

1 製品

1702

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","v

106 製品

1452

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

163 製品

1451

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

116 製品

25227

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

3 製品

25226

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

3 製品

25162

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 製品

25190

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

7 製品

25191

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 製品

25297

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

4 製品

25237

Cutting insert for Torx

Cutting insert for Torx. Designation: Cutting insert for Torx, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"f

6 製品

25231

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

5 製品

25218

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 製品

25187

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 製品

25203

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 製品

25299

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

4 製品

25186

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 製品

25195

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 製品

25202

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 製品

2520

Round indexable insert

Round indexable insert. Designation: Round indexable insert, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

6 製品

25229

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

5 製品

25126

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 製品

25222

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

3 製品

25117

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

13 製品

25151

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 製品

25167

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 製品

25116

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

13 製品

25214

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 製品

25178

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 製品

25211

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 製品

25171

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 製品

25150

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 製品

25182

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 製品

25121

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

13 製品

25219

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 製品

25296

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

4 製品

25077

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

27 製品

25235

Cutting insert for internal square

Cutting insert for internal square. Designation: Cutting insert for internal square, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"pa

5 製品

25130

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 製品

25170

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 製品

25174

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 製品

25154

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 製品

25113

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

22 製品

25120

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

13 製品

25135

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 製品

25081

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

27 製品

25239

Cutting insert for Torx

Cutting insert for Torx. Designation: Cutting insert for Torx, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","v

6 製品

25073

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 製品

25093

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

13 製品

25163

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 製品

25076

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

27 製品

25108

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

22 製品

25206

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 製品

25089

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

30 製品

25057

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 製品

25158

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 製品

25138

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 製品

25072

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 製品

25194

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 製品

25166

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 製品

25109

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

22 製品

25096

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

13 製品

25233

Cutting insert for internal square

Cutting insert for internal square. Designation: Cutting insert for internal square, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"

5 製品

25131

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 製品

25088

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

30 製品

25147

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 製品

25215

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 製品

25159

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 製品

25139

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 製品

25199

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 製品

25134

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 製品

25061

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

51 製品

25175

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 製品

25146

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 製品

25085

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 製品

25056

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 製品

25179

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 製品

25097

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

13 製品

25084

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 製品

25503

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 製品

25112

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

22 製品

25210

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 製品

25223

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

3 製品

25198

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 製品

25064

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

51 製品

25092

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

13 製品

25207

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 製品

25143

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 製品

25142

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 製品

27238

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 製品

26604

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

1 製品

25816

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

4 製品

25648

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 製品

27236

Cutting insert for axial grooving in holes, full radius slots

94 製品

25677

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 製品

25649

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 製品

25739

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 製品

25621

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 製品

25622

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 製品

27147

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 製品

27290

Cutting insert for drilling into solid material and boring out Quattro Drill

Cutting insert for drilling into solid material and boring out Quattro Drill. Designation: Cutting insert for drilling into solid material and boring out Q

4 製品

25636

Indexable insert for axial grooving, full radius slots

6 製品

25630

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 製品

25674

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 製品

25643

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

2 製品

27140

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

4 製品

25799

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 製品

27201

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

25639

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 製品

25618

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 製品

25811

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 製品

25798

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 製品

27135

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

6 製品

25665

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 製品

27244

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 製品

25620

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 製品

25670

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

4 製品

27243

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 製品

25862

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

7 製品

25634

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 製品

25879

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

25823

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

4 製品

25795

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 製品

25659

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 製品

25069

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 製品

27240

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 製品

27148

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 製品

27139

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 製品

25675

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 製品

27150

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 製品

27142

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

4 製品

27210

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 製品

27100

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

25655

Indexable insert for external partial profile threading

4 製品

27117

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

27138

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 製品

25642

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 製品

25606

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 製品

27124

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 製品

26902

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 製品

27120

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 製品

25802

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 製品

27229

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 製品

27235

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 製品

25601

Indexable insert for radial grooving external and internal

Indexable insert for radial grooving external and internal. Designation: Indexable insert for radial grooving external and internal, TABLE_INFO_PASSON: [{"

15 製品

27211

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 製品

27133

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

6 製品

27205

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

27204

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

25846

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 製品

27146

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

4 製品

27116

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

25635

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 製品

25830

Cutting insert for internal threading, part profile trapezoidal thread

Cutting insert for internal threading, part profile trapezoidal thread. Designation: Cutting insert for internal threading, part profile trapezoidal thread

6 製品

25803

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 製品

27137

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 製品

27136

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 製品

25663

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 製品

25806

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 製品

27134

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

6 製品

26904

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 製品

25603

Indexable insert for radial grooving external and internal

Indexable insert for radial grooving external and internal. Designation: Indexable insert for radial grooving external and internal, TABLE_INFO_PASSON: [{"

15 製品

25676

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 製品

25790

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 製品

25155

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 製品

27149

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 製品

25767

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 製品

25615

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 製品

27123

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 製品

27103

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 製品

25679

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 製品

27125

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 製品

25607

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 製品

25810

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 製品

27104

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 製品

27111

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 製品

25783

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 製品

27128

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 製品

25068

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 製品

25838

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 製品

27234

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 製品

25669

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

4 製品

25628

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 製品

27246

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 製品

25878

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

25786

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 製品

27109

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 製品

27118

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 製品

27110

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 製品

27101

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

25510

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 製品

25658

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 製品

25819

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

4 製品

27206

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 製品

27228

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 製品

25779

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 製品

25667

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 製品

27121

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 製品

25774

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 製品

26903

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 製品

25738

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 製品

25859

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 製品

25614

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 製品

25755

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

25794

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 製品

25666

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 製品

27218

Cutting insert for boring out and profiling

20 製品

25898

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 製品

25762

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 製品

27105

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

25672

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

4 製品

25719

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

36 製品

25507

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 製品

27108

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 製品

25847

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 製品

25656

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 製品

25850

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 製品

27227

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 製品

25851

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 製品

27207

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 製品

25870

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

28 製品

27102

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 製品

25715

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 製品

25706

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 製品

25771

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 製品

25613

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 製品

25827

Cutting insert for internal threading, part profile trapezoidal thread

Cutting insert for internal threading, part profile trapezoidal thread. Designation: Cutting insert for internal threading, part profile trapezoidal thread

6 製品

25754

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

27127

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 製品

25707

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 製品

27202

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 製品

25750

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

27225

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 製品

27224

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 製品

25703

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

54 製品

27222

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 製品

25522

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 製品

25623

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 製品

25646

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

2 製品

25883

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 製品

25711

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 製品

25060

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

51 製品

25821

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

4 製品

25631

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 製品

27226

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 製品

25894

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 製品

25875

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

25855

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 製品

27237

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 製品

25511

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 製品

25619

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 製品

25502

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 製品

25839

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 製品

27242

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 製品

25722

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

36 製品

27247

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 製品

25867

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

28 製品

25751

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

25053

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

54 製品

25714

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 製品

25887

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 製品

25723

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

36 製品

27216

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

27217

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

27129

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 製品

27130

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 製品

25626

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 製品

25518

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 製品

26905

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 製品

25657

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 製品

27107

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 製品

25519

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 製品

25742

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

36 製品

27106

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 製品

27219

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 製品

25842

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 製品

25523

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 製品

25758

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 製品

25651

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

2 製品

25835

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 製品

25843

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 製品

25770

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 製品

27203

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 製品

25514

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 製品

25743

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

36 製品

27119

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 製品

25702

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

54 製品

25866

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

28 製品

25895

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 製品

25854

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 製品

27200

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

27220

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 製品

25775

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 製品

25759

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 製品

27221

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 製品

25678

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

6 製品

27230

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 製品

25605

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 製品

25778

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 製品

25718

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

36 製品

26906

Cutting insert for drilling into solid material and boring out Quattro Drill

Cutting insert for drilling into solid material and boring out Quattro Drill. Designation: Cutting insert for drilling into solid material and boring out Q

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 製品

25886

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 製品

25871

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

28 製品

25747

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

36 製品

27151

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 製品

25710

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 製品

5029

Indexable insert for single-fluted gun drill EB 800

Indexable insert for single-fluted gun drill EB 800. Designation: Indexable insert for single-fluted gun drill EB 800, Diameter range: 25.000 - 25.499, TAB

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

132 製品

1032

Step ratio drill, 3-fluted

Step ratio drill, 3-fluted. Designation: Step ratio drill, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

14 製品

3798

Al slot drill (2-fluted) set

Al slot drill (2-fluted) set. Designation: Al slot drill (2-fluted) set, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

1 製品

3303

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 製品

3709

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 製品

3860

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 2.000 mm – 8.000 mm, TABLE_INFO_PA

5 製品

3686

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

22 製品

4269

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_P

24 製品

3859

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_P

7 製品

19991

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

8 製品

3677

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 製品

3684

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 0.300 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

32 製品

19963

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 製品

3203

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

25 製品

3676

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 製品

19962

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

1 製品

5574

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

22 製品

5573

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

30 製品

5030

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 25.000 - 25.499, T

400 製品

5707

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 25.000 - 25.499, T

400 製品

5703

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 50.000 - 50.499, T

400 製品

5705

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 37.500 - 37.999, T

400 製品

6013

90° front/back deburrer set

90° front/back deburrer set. Designation: 90° front/back deburrer set, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

2 製品

513

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSO

110 製品

1056

VBMX indexable insert

VBMX indexable insert. Designation: VBMX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 製品

1009

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 製品

1161

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 製品

1008

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 製品

1047

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

71 製品

1861

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 製品

1927

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 製品

1859

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 製品

1883

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 製品

1972

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 製品

1858

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 製品

1860

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 製品

2311

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 製品

1931

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 製品

1581

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

10 製品

2464

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

199 製品

2463

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

205 製品

2507

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 製品

2518

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 製品

2506

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 製品

2510

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 製品

2516

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 製品

2485

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

71 製品

2601

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.170 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

98 製品

4118

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 製品

4181

CCHX indexable insert, external

CCHX indexable insert, external. Designation: CCHX indexable insert, external, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

2 製品

2944

Machine tap for ISO metric threads

146 製品

4025

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.500 mm – 25.650 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

91 製品

2747

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

71 製品

4113

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

152 製品

4112

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

156 製品

4599

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

4 製品

4673

Machine tap for ISO metric threads

9 製品

6605

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 製品

6602

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 製品

6237

DCMT indexable insert

DCMT indexable insert. Designation: DCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 製品

6272

CCMT indexable insert

CCMT indexable insert. Designation: CCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 製品

6238

TCMT indexable insert

TCMT indexable insert. Designation: TCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

6239

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 製品

6995

90° chamfering milling cutter set SpyroTec

90° chamfering milling cutter set SpyroTec. Designation: 90° chamfering milling cutter set SpyroTec, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr

1 製品

6601

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 製品

7654

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7652

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

4 製品

7661

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

6994

90° chamfering milling cutter set SpyroTec

90° chamfering milling cutter set SpyroTec. Designation: 90° chamfering milling cutter set SpyroTec, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr

1 製品

7636

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7650

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

4 製品

7641

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 製品

7640

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 製品

7660

CCMT indexable insert

CCMT indexable insert. Designation: CCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 製品

7647

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7632

CPGW indexable insert

CPGW indexable insert. Designation: CPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

5 製品

7651

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

4 製品

7711

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

2 製品

724

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

12 製品

736

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 6.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},

11 製品

723

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"

13 製品

7642

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 製品

7658

CCMT indexable insert

CCMT indexable insert. Designation: CCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"at

6 製品

7635

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 製品

942

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 製品

7648

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7656

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7639

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7634

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7657

CCGX indexable insert

CCGX indexable insert. Designation: CCGX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 製品

6849

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 製品

7638

TCGT indexable insert

TCGT indexable insert. Designation: TCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 製品

7643

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 製品

7653

TPGW indexable insert

TPGW indexable insert. Designation: TPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

7655

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

702

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.490 mm – 6.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

92 製品

7637

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 製品

7645

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

5 製品

706

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.500 mm – 1.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 製品

978

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 製品

976

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 製品

972

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 製品

975

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 製品

944

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 製品

4128

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

12 製品

3752

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

2 製品

3751

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 製品

4136

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 製品

4135

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 製品

3754

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 製品

3768

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 製品

4499

Micro thread milling cutter set for metric threads

Micro thread milling cutter set for metric threads. Designation: Micro thread milling cutter set for metric threads, Diameter range: M2 - M4, TABLE_INFO_PA

2 製品

5547

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 製品

4770

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 製品

3744

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 製品

3524

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 製品

4130

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

6 製品

3748

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 製品

3770

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 製品

4137

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 製品

4162

External thread milling cutter for ISO metric threads

External thread milling cutter for ISO metric threads. Designation: External thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P",

9 製品

3735

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 製品

3772

Universal thread milling cutter for NPTF-threads

Universal thread milling cutter for NPTF-threads. Designation: Universal thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

2 製品

4129

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

12 製品

4133

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 製品

3542

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 製品

3769

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 製品

3746

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 製品

3771

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

1 製品

3597

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

1 製品

4134

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 製品

3758

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 製品

3753

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 製品

3596

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

18 製品

3740

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 製品

3745

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 製品

4780

Circular drill thread milling cutter for Whitworth pipe threads

Circular drill thread milling cutter for Whitworth pipe threads. Designation: Circular drill thread milling cutter for Whitworth pipe threads, TABLE_INFO_P

3 製品

3750

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 製品

4131

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 製品

3756

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 製品

4214

Micro thread milling cutter for MJ threads

Micro thread milling cutter for MJ threads. Designation: Micro thread milling cutter for MJ threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 製品

3773

Universal thread milling cutter for NPTF-threads

Universal thread milling cutter for NPTF-threads. Designation: Universal thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

2 製品

3557

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 製品

3734

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

14 製品

3755

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 製品

4132

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 製品

4700

Circular drill thread milling cutter for UNC and UNF threads

Circular drill thread milling cutter for UNC and UNF threads. Designation: Circular drill thread milling cutter for UNC and UNF threads, TABLE_INFO_PASSON:

23 製品

3556

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 製品

4226

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

14 製品

4225

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

10 製品

3541

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 製品

3523

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 製品

3757

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 製品

4228

Micro thread milling cutter for BSP-threads

Micro thread milling cutter for BSP-threads. Designation: Micro thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

4 製品

4215

Micro thread milling cutter for UNJC/UNJF- threads

Micro thread milling cutter for UNJC/UNJF- threads. Designation: Micro thread milling cutter for UNJC/UNJF- threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 製品

3737

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

17 製品

4001

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

14 製品

3595

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

13 製品

4163

External thread milling cutter for ISO metric threads

External thread milling cutter for ISO metric threads. Designation: External thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P",

12 製品

4002

Circular drill thread milling cutter for metric ISO threads

Circular drill thread milling cutter for metric ISO threads. Designation: Circular drill thread milling cutter for metric ISO threads, TABLE_INFO_PASSON: [

16 製品

4227

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

10 製品

4223

Micro thread milling cutter for UNC/UNF threads

Micro thread milling cutter for UNC/UNF threads. Designation: Micro thread milling cutter for UNC/UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

23 製品

3743

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

16 製品

5548

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 製品

4496

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 製品

6486

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.35 - 12.7, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{

1 製品

3209

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","va

7 製品

19950

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

3598

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19951

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

3728

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 14.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val

2 製品

3304

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

21 製品

4372

Ratio end mill set RF 100 U (3-fluted cutter)

Ratio end mill set RF 100 U (3-fluted cutter). Designation: Ratio end mill set RF 100 U (3-fluted cutter), Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [

1 製品

5582

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","va

5 製品

6885

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

6834

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

11 製品

6886

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

6845

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

12 製品

6836

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 製品

6853

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

11 製品

6846

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

11 製品

6844

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

12 製品

6855

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

37 製品

6852

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

17 製品

4371

Ratio end mill set RF 100 INOX NF

Ratio end mill set RF 100 INOX NF. Designation: Ratio end mill set RF 100 INOX NF, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

1 製品

4348

High-performance roughing end mill RS 100 F set

High-performance roughing end mill RS 100 F set. Designation: High-performance roughing end mill RS 100 F set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 製品

3799

End mill (4-fluted) set

End mill (4-fluted) set. Designation: End mill (4-fluted) set, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

1 製品

4347

High-performance roughing end mill RS 100 F set

High-performance roughing end mill RS 100 F set. Designation: High-performance roughing end mill RS 100 F set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 製品

4370

Ratio end mill set RF 100 VA

Ratio end mill set RF 100 VA. Designation: Ratio end mill set RF 100 VA, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

1 製品

6957

Ratio end mill set RF 100 5 Speed

Ratio end mill set RF 100 5 Speed. Designation: Ratio end mill set RF 100 5 Speed, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 製品

4344

High-performance roughing end mill RS 100 U set

High-performance roughing end mill RS 100 U set. Designation: High-performance roughing end mill RS 100 U set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 製品

6758

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 1/4 - 5/8, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

1 製品

6755

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

2 製品

6754

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 5.7 - 15.6, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

2 製品

5645

Ratio end mill set RF 100 U

Ratio end mill set RF 100 U. Designation: Ratio end mill set RF 100 U, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

1 製品

6483

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

4 製品

6482

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

4 製品

5634

Ratio end mill set RF 100 U

Ratio end mill set RF 100 U. Designation: Ratio end mill set RF 100 U, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

1 製品

4352

High-performance roughing end mill RS 100 U set

High-performance roughing end mill RS 100 U set. Designation: High-performance roughing end mill RS 100 U set, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSO

1 製品

5635

Ratio end mill set RF 100 U

Ratio end mill set RF 100 U. Designation: Ratio end mill set RF 100 U, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

1 製品

6956

Ratio end mill set RF 100 5 Speed

62 製品

2472

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

156 製品

2718

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 製品

5611

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

147 製品

5612

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

104 製品

5614

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

142 製品

8621

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

150 製品

8611

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

150 製品

8610

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

150 製品

8620

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

148 製品

1210

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 5.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

4 製品

4386

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

6 製品

4387

Spindle flange SK/HSK-C

Spindle flange SK/HSK-C. Designation: Spindle flange SK/HSK-C, Internal diameter: 128.57 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

4 製品

4385

Spindle mounting flange HSK

Spindle mounting flange HSK. Designation: Spindle mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

11 製品

4582

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

4 製品

4665

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 1/4", Internal diameter: 15.88 mm, T

10 製品

4581

Spindle attachment mounting flange HSK

Spindle attachment mounting flange HSK. Designation: Spindle attachment mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

7 製品

4586

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

5 製品

5019

Two-fluted gun drill ZB 80

Two-fluted gun drill ZB 80. Designation: Two-fluted gun drill ZB 80, Diameter range: 8.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

3 製品

5643

Two-fluted gun drill ZB 80

Two-fluted gun drill ZB 80. Designation: Two-fluted gun drill ZB 80, Diameter range: 8.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

3 製品

4363

Spindle attachment flange module 6x6 HSK

Spindle attachment flange module 6x6 HSK. Designation: Spindle attachment flange module 6x6 HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

6 製品

4368

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 3.012 mm – 25.032 mm, Nominal diamet

28 製品

4369

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 3.012 mm – 125.032 mm, Nominal diame

82 製品

4584

Spindle mounting flange HSK

Spindle mounting flange HSK. Designation: Spindle mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

6 製品

4713

Spindle attachment flange module 4x4 HSK

Spindle attachment flange module 4x4 HSK. Designation: Spindle attachment flange module 4x4 HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

6 製品

19971

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

4 製品

3049

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 製品

3024

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

11 製品

19969

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 製品

5533

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 4.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

6 製品

25306

Square shank holder, 90° offset and stepped, with IC

Square shank holder, 90° offset and stepped, with IC. Designation: Square shank holder, 90° offset and stepped, with IC, TABLE_INFO_PASSON: [{"attr":"P","v

2 製品

25312

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 製品

25014

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 製品

25020

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 製品

25310

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

1 製品

25003

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

7 製品

25315

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 製品

25015

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 製品

25309

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 製品

25303

Square shank holder, 90° offset and stepped without IC

Square shank holder, 90° offset and stepped without IC. Designation: Square shank holder, 90° offset and stepped without IC, TABLE_INFO_PASSON: [{"attr":"P

2 製品

26103

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

17 製品

25304

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 製品

25004

Square shank holder, 90° offset and stepped without IC

Square shank holder, 90° offset and stepped without IC. Designation: Square shank holder, 90° offset and stepped without IC, TABLE_INFO_PASSON: [{"attr":"P

2 製品

25010

Polygon shank holder, straight 0°

Polygon shank holder, straight 0°. Designation: Polygon shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

4 製品

25363

Square shank holder, 45° offset, external machining without IC

Square shank holder, 45° offset, external machining without IC. Designation: Square shank holder, 45° offset, external machining without IC, TABLE_INFO_PAS

9 製品

25364

Square shank holder, 45° offset, external machining with IC

Square shank holder, 45° offset, external machining with IC. Designation: Square shank holder, 45° offset, external machining with IC, TABLE_INFO_PASSON: [

8 製品

25314

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 製品

25002

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

7 製品

25013

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 製品

25005

Square shank holder, 90° offset and stepped, with IC

Square shank holder, 90° offset and stepped, with IC. Designation: Square shank holder, 90° offset and stepped, with IC, TABLE_INFO_PASSON: [{"attr":"P","v

2 製品

25372

Square shank holder straight, for external machining with adjustable IC

Square shank holder straight, for external machining with adjustable IC. Designation: Square shank holder straight, for external machining with adjustable

12 製品

25313

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 製品

25359

Square shank holder, 90° offset, external machining, with IC

Square shank holder, 90° offset, external machining, with IC. Designation: Square shank holder, 90° offset, external machining, with IC, TABLE_INFO_PASSON:

32 製品

25365

Square shank holder, 45° offset, external machining with IC

Square shank holder, 45° offset, external machining with IC. Designation: Square shank holder, 45° offset, external machining with IC, TABLE_INFO_PASSON: [

8 製品

25305

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 製品

25353

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

32 製品

25307

Polygon shank holder, straight 0°

Polygon shank holder, straight 0°. Designation: Polygon shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

4 製品

25350

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

36 製品

25357

Square shank holder, 90° offset, external machining, without IC

Square shank holder, 90° offset, external machining, without IC. Designation: Square shank holder, 90° offset, external machining, without IC, TABLE_INFO_P

36 製品

25019

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 製品

26101

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

17 製品

25373

Square shank holder straight, for external machining with adjustable IC

Square shank holder straight, for external machining with adjustable IC. Designation: Square shank holder straight, for external machining with adjustable

12 製品

25356

Square shank holder, 90° offset, external machining, without IC

Square shank holder, 90° offset, external machining, without IC. Designation: Square shank holder, 90° offset, external machining, without IC, TABLE_INFO_P

36 製品

25308

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 製品

25362

Square shank holder, 45° offset, external machining without IC

Square shank holder, 45° offset, external machining without IC. Designation: Square shank holder, 45° offset, external machining without IC, TABLE_INFO_PAS

9 製品

26100

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

17 製品

25012

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 製品

26102

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

17 製品

25352

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

32 製品

25358

Square shank holder, 90° offset, external machining, with IC

Square shank holder, 90° offset, external machining, with IC. Designation: Square shank holder, 90° offset, external machining, with IC, TABLE_INFO_PASSON:

32 製品

25351

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

36 製品

27010

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 製品

27012

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 製品

27009

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 製品

4050

MQL mounting adapter set

MQL mounting adapter set. Designation: MQL mounting adapter set, Total length: 1.00 mm, EAN: 4049844097094

2 製品

4038

Clamping force proofing instrument Senso 3000

Clamping force proofing instrument Senso 3000. Designation: Clamping force proofing instrument Senso 3000, EAN: 4031093703628

10 製品

27007

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 製品

27008

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 製品

27055

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 製品

4237

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 45.500 mm, Internal diameter: 14.29 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

16 製品

4235

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 10.000 mm – 45.500 mm, Internal diameter: 2.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

26 製品

4335

Sealing washer

Sealing washer. Designation: Sealing washer, Total length: 4.00 mm, Internal diameter: 5.00 mm, EAN: 4049844009837, Standard: Company std.

144 製品

4236

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 45.500 mm, Internal diameter: 3.17 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

20 製品

4302

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 10.000 mm – 45.500 mm, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

38 製品

4212

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 39.000 mm, Internal diameter: 15.88 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

4 製品

4973

Clamping force measuring instrument

Clamping force measuring instrument. Designation: Clamping force measuring instrument, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 製品

4715

Angle alignment unit

Angle alignment unit. Designation: Angle alignment unit, Total length: 19.00 mm, EAN: 4049844060609, Standard: Company std., Surface: bright

2 製品

4974

Clamping force measuring instrument

Clamping force measuring instrument. Designation: Clamping force measuring instrument, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 製品

5772

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 28.000 - 29.999, Total length: 12.00

24 製品

5770

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 12.400 - 12.899, Total length: 4.00

86 製品

5752

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 13.900 - 14.399, Total length: 4.00

113 製品

5753

Sealing washer for two-fluted drills

Sealing washer for two-fluted drills. Designation: Sealing washer for two-fluted drills, Diameter range: 7.600 - 7.799, Total length: 4.00 mm, EAN: 4049844

80 製品

4760

Shrink fit chuck flange module 4x4

Shrink fit chuck flange module 4x4. Designation: Shrink fit chuck flange module 4x4, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

11 製品

4717

Shrink fit chuck flange module 6x6

Shrink fit chuck flange module 6x6. Designation: Shrink fit chuck flange module 6x6, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

11 製品

4723

Alignment adapter HSK-A module 6x6

Alignment adapter HSK-A module 6x6. Designation: Alignment adapter HSK-A module 6x6, Internal diameter: 80.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

15 製品

4724

Alignment adapter SK module 4x4

Alignment adapter SK module 4x4. Designation: Alignment adapter SK module 4x4, Internal diameter: 35.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

10 製品

4725

Alignment adapter SK module 6x6

Alignment adapter SK module 6x6. Designation: Alignment adapter SK module 6x6, Internal diameter: 50.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

10 製品

4297

Alignment adapter HSK-A module 4x4

Alignment adapter HSK-A module 4x4. Designation: Alignment adapter HSK-A module 4x4, Internal diameter: 40.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

15 製品

4709

Alignment adapter BT module 4x4

Alignment adapter BT module 4x4. Designation: Alignment adapter BT module 4x4, Internal diameter: 60.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

12 製品

4712

Alignment adapter BT module 6x6

Alignment adapter BT module 6x6. Designation: Alignment adapter BT module 6x6, Internal diameter: 35.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

12 製品

5513

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

45 製品

6070

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

66 製品

6068

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

75 製品

6069

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

67 製品

770

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

70 製品

769

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

66 製品

768

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

112 製品

5651

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

140 製品

5650

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

141 製品

6026

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

189 製品

6025

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 製品

6023

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

206 製品

6024

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 製品

19989

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 製品

19987

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 製品

3730

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 製品

19993

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 製品

3059

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 製品

19995

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

10 製品

19983

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 製品

19997

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

10 製品

3296

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 製品

3294

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

3297

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

19 製品

19985

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

3719

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 製品

3286

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

15 製品

3295

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

30 製品

3634

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

12 製品

3720

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 製品

3126

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 製品

3154

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

30 製品

3729

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 製品

5543

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 製品

5542

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

11 製品

5531

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 製品

5546

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 製品

5502

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

13 製品

5530

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 製品

4096

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 4.010 mm – 16.020 mm, Internal diameter: 14.00 m

8 製品

4097

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 4.010 mm – 8.010 mm, Internal diameter: 4.00 mm,

3 製品

4095

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 14.020 mm – 25.032 mm, Internal diameter: 20.00

7 製品

1438

Arbor, complete

Arbor, complete. Designation: Arbor, complete, Diameter range: 13.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

8 製品

26201

Parting off blade with IC

Parting off blade with IC. Designation: Parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"}

4 製品

26200

Parting off blade without IC

Parting off blade without IC. Designation: Parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

4 製品

4312

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, Diameter range: 32 mm – 32 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

1 製品

4319

SK driving key

SK driving key. Designation: SK driving key, Total length: 192.25 mm, EAN: 4031093548182, Type of machine interface: SK

7 製品

4315

SK driving key

SK driving key. Designation: SK driving key, Total length: 189.95 mm, EAN: 4031093548120, Standard: Company std., Type of machine interface: SK

11 製品

4355

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, Diameter range: 32 mm – 80 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

11 製品

4975

Balancing masters

Balancing masters. Designation: Balancing masters, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

7 製品

Empty case

Empty case. Designation: Empty case, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

5 製品

4354

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 製品

4955

RFID data carrier

RFID data carrier. Designation: RFID data carrier, Diameter range: 10.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

3 製品

1434

Arbor without accessories

Arbor without accessories. Designation: Arbor without accessories, Diameter range: 16.000 mm – 45.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

7 製品

4168

Without internal cooling

Without internal cooling. TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val"

4 製品

773

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 5.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

8 製品

3044

GF 200 B ball nose profile cutter

GF 200 B ball nose profile cutter. Designation: GF 200 B ball nose profile cutter, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 製品

3679

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

17 製品

3308

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

17 製品

3030

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

7 製品

19968

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 製品

3014

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

7 製品

3045

GF 200 B ball nose profile cutter

GF 200 B ball nose profile cutter. Designation: GF 200 B ball nose profile cutter, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 製品

19970

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

7 製品

3359

Ball nose hard profile cutter GF 300 B

8 製品

6106

Locking disc

Locking disc. Designation: Locking disc, Total length: 5.00 mm, EAN: 4049844400030

2 製品

Plastic stand only

Plastic stand only. Designation: Plastic stand only, Diameter range: 1/16 - 1/2, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 製品

1040

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 41.000 mm – 90.000 mm, Internal diameter: 6.00 mm, TABLE

24 製品

1041

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 41.000 mm – 76.000 mm, Internal diameter: 6.00 mm, TABLE

24 製品

4003

Adapter CAT to HSK-C

Adapter CAT to HSK-C. Designation: Adapter CAT to HSK-C, Diameter range: 63 mm – 63 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{

2 製品

4076

Coolant supply measuring instrument CC 3000

Coolant supply measuring instrument CC 3000. Designation: Coolant supply measuring instrument CC 3000, Total length: 138.00 mm, EAN: 4031093766111

1 製品

4510

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, Diameter range: 63 mm – 100 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

5 製品

4068

Flow rate measuring device PQ 3000

Flow rate measuring device PQ 3000. Designation: Flow rate measuring device PQ 3000, EAN: 4031093743662

1 製品

4512

SK / HSK-C adaptor for tapping chucks

SK / HSK-C adaptor for tapping chucks. Designation: SK / HSK-C adaptor for tapping chucks, Diameter range: 32 mm – 100 mm, TABLE_INFO_PASSON: [{"attr":"P",

10 製品

4514

MAS/BT / HSK-C adaptor for tapping chucks

MAS/BT / HSK-C adaptor for tapping chucks. Designation: MAS/BT / HSK-C adaptor for tapping chucks, Diameter range: 40 mm – 63 mm, TABLE_INFO_PASSON: [{"att

6 製品

4746

Cable hoist

Cable hoist. Designation: Cable hoist, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"at

1 製品

4616

Adapter for M contour clamping sets

Adapter for M contour clamping sets. Designation: Adapter for M contour clamping sets, Diameter range: 8 mm – 11 mm, Internal diameter: 6.00 mm, TABLE_INFO

6 製品

4968

Taper measuring gauge for HSK shank

Taper measuring gauge for HSK shank. Designation: Taper measuring gauge for HSK shank, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 製品

4936

Adapter for M contour clamping sets

Adapter for M contour clamping sets. Designation: Adapter for M contour clamping sets, Total length: 26.00 mm, EAN: 4031093774826

4 製品

4922

Driver set

Driver set. Designation: Driver set, Diameter range: 16.000 mm – 50.000 mm, Nominal diameter: 32.00 mm, Total length: 20.00 mm, EAN: 4031093391771, Standar

6 製品

4978

Measuring gauge for HSK clamping shoulders

Measuring gauge for HSK clamping shoulders. Designation: Measuring gauge for HSK clamping shoulders, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

7 製品

4769

Stop disc

Stop disc. Designation: Stop disc, EAN: 4031093716260

8 製品

4934

Adapter for MQL clamping sets

Adapter for MQL clamping sets. Designation: Adapter for MQL clamping sets, Diameter range: 4 mm – 12 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

17 製品

4969

Measuring gauge for HSK spindles

Measuring gauge for HSK spindles. Designation: Measuring gauge for HSK spindles, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 製品

4116

Floating holder with ER collet chuck holder

Floating holder with ER collet chuck holder. Designation: Floating holder with ER collet chuck holder, Diameter range: 3 - 20, TABLE_INFO_PASSON: [{"attr":

5 製品

4117

Floating side lock holder

Floating side lock holder. Designation: Floating side lock holder, Diameter range: 16 - 25, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 製品

1659

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 製品

1673

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

60 製品

1663

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

134 製品

1662

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

141 製品

1661

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 21.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

112 製品

1660

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

135 製品

2475

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

20 製品

2478

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

40 製品

2480

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

159 製品

2479

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 2.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

202 製品

2477

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

204 製品

2712

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

18 製品

2939

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PAS

25 製品

2717

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

27 製品

2713

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

72 製品

2996

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 2.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

160 製品

2711

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

106 製品

4044

Ratio drill with coolant ducts

163 製品

5580

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 製品

5514

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

189 製品

5512

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

156 製品

5714

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

155 製品

6596

Pilot drill with coolant ducts

Pilot drill with coolant ducts. Designation: Pilot drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

205 製品

8521

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

155 製品

5510 SHOPT 20260821

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 3.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 製品

3680

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 製品

3558

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 製品

19982

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

19996

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

12 製品

3314

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 製品

3310

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 製品

3633

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 製品

19990

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

11 製品

3196

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

21 製品

3194

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 製品

19994

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

12 製品

19984

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

19986

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 製品

3361

Hard profile cutter with Torus grind GF 300 T

Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO

28 製品

3021

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

13 製品

19988

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

15 製品

3560

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

31 製品

3362

Hard profile cutter with Torus grind GF 300 T

Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO

36 製品

3358

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 5.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

6 製品

3856

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_P

26 製品

3309

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

13 製品

3635

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 製品

3011

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

13 製品

3540

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 製品

19992

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

11 製品

3555

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 製品

3193

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 製品

3636

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

21 製品

3559

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

20 製品

3106

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

20 製品

3367

Slot drill GA 200 A (3-fluted)

Slot drill GA 200 A (3-fluted). Designation: Slot drill GA 200 A (3-fluted), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

18 製品

3195

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

33 製品

3561

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

32 製品

5507

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 製品

5743

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 製品

5730

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 製品

6722

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [

8 製品

5549

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

11 製品

4268

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_P

24 製品

5506

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 製品

6721

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 製品

5505

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 製品

3396

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 製品

5579

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 製品

546

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

8 製品

5649

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

7 製品

6012

60° Chamfering milling cutter

60° Chamfering milling cutter. Designation: 60° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 製品

6029

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 製品

6028

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

13 製品

6015

120° Chamfering milling cutter

120° Chamfering milling cutter. Designation: 120° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

4 製品

6027

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 製品

6715

120° Chamfering milling cutter

120° Chamfering milling cutter. Designation: 120° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 製品

6811

60° Chamfering milling cutter SpyroTec

60° Chamfering milling cutter SpyroTec. Designation: 60° Chamfering milling cutter SpyroTec, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

6 製品

3766

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 製品

3533

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 製品

3760

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 製品

3538

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 製品

3539

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

3 製品

3544

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 製品

3529

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 製品

3546

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 製品

3543

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 製品

3545

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 製品

4000

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

20 製品

3366

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

6 製品

3693

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 製品

3894

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PAS

8 製品

3522

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

3469

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

3896

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

6 製品

3127

Roughing end mill GS 100 A (coarse teeth)

Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON:

9 製品

3807

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

6 製品

19941

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

3364

Roughing end mill GS 100 A (coarse teeth)

10 製品

3885

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

5 製品

3019

End mill

End mill. Designation: End mill, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 製品

19977

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 製品

3200

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 製品

3508

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

19973

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 製品

19975

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 製品

3204

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"at

11 製品

3721

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 製品

3718

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

19965

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 製品

3026

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 製品

3892

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

21 製品

3499

Ratio end mill RF 100 Ti

Ratio end mill RF 100 Ti. Designation: Ratio end mill RF 100 Ti, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

48 製品

19981

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 製品

3898

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 製品

3298

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 製品

3873

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

22 製品

3871

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

19979

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 製品

3805

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 製品

3285

End mill

End mill. Designation: End mill, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

14 製品

3722

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 製品

19967

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 製品

3630

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 製品

3731

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 製品

3632

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

6 製品

3047

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 製品

3201

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 製品

3313

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 製品

3803

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

22 製品

3890

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 製品

3299

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 製品

3471

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

5583

Hard roughing end mill GS 100 H (fine teeth)

Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_P

6 製品

6731

Ratio end mill RF 100 AL

9 製品

6882

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

6702

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 製品

6727

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

5 製品

6890

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 製品

6479

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 製品

6726

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

6884

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

5655

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 製品

6869

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

7 製品

6703

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

5532

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 製品

6733

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

5504

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

8 製品

6871

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 製品

6888

High-performance roughing end mill RS 100 U

High-performance roughing end mill RS 100 U. Designation: High-performance roughing end mill RS 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 製品

6798

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

21 製品

5544

Roughing end mill (3-fluted)

Roughing end mill (3-fluted). Designation: Roughing end mill (3-fluted), Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

5 製品

6861

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

24 製品

5535

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 製品

6804

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

19 製品

5584

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 製品

5654

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

6735

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

6802

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

7 製品

6467

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 製品

6708

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 製品

6800

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"at

5 製品

5534

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 製品

6729

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

27 製品

6760

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 製品

6465

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 製品

6710

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

9 製品

6768

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

6728

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

8 製品

6878

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

12 製品

6481

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 製品

5545

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

8 製品

6959

Ratio end mill RF 100 Speed P

Ratio end mill RF 100 Speed P. Designation: Ratio end mill RF 100 Speed P, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 製品

6781

Ratio end mill set RF 100 Speed

Ratio end mill set RF 100 Speed. Designation: Ratio end mill set RF 100 Speed, Diameter range: 6.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

5 製品

6971

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

25024

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 製品

25321

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 製品

25302

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 製品

25006

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 製品

25369

Round shank holder, internal machining without IC

Round shank holder, internal machining without IC. Designation: Round shank holder, internal machining without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-

24 製品

25370

Round shank holder, internal machining with IC

Round shank holder, internal machining with IC. Designation: Round shank holder, internal machining with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

24 製品

25371

Round shank holder, internal machining with IC

Round shank holder, internal machining with IC. Designation: Round shank holder, internal machining with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

24 製品

25368

Round shank holder, internal machining without IC

Round shank holder, internal machining without IC. Designation: Round shank holder, internal machining without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-

24 製品

27015

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 製品

27016

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 製品

27056

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 製品

1946

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.600 mm – 14.100 mm, TABLE_INFO_PASSO

20 製品

5578

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 4.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

17 製品

6788

Quadrant milling cutter

Quadrant milling cutter. Designation: Quadrant milling cutter, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

12 製品

6992

90° Chamfering milling cutter SpyroTec

90° Chamfering milling cutter SpyroTec. Designation: 90° Chamfering milling cutter SpyroTec, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

6 製品

6817

Ball nose end mill G-Mold µ 65 B

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19 製品

6737

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

16 製品

6818

Ball nose end mill G-Mold µ 65 B

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19 製品

3520

Thread milling cutter for NPT-threads

10 製品

3525

Thread milling cutter for ISO metric threads

10 製品

3018

Ball nose end mill

Ball nose end mill. Designation: Ball nose end mill, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

5 製品

3897

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 製品

3895

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

6 製品

19966

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 製品

3507

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

3893

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PAS

8 製品

3727

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 製品

3473

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

3800

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

22 製品

3202

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 製品

3509

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

19972

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

11 製品

3733

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

5 製品

3839

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

19974

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 製品

3470

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

3629

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 製品

3472

Ratio end mill RF 100 AL

6 製品

3015

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

3691

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 製品

3736

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

12 製品

3208

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 製品

3804

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 製品

3043

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

3891

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

21 製品

3563

Multi-tooth end mill with corner radius GH 100 U

Multi-tooth end mill with corner radius GH 100 U. Designation: Multi-tooth end mill with corner radius GH 100 U, Diameter range: 3.000 mm – 20.000 mm, TABL

31 製品

3872

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

22 製品

3806

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

6 製品

3631

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

6 製品

3696

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

3498

Ratio end mill RF 100 Ti

Ratio end mill RF 100 Ti. Designation: Ratio end mill RF 100 Ti, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

48 製品

6464

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 製品

6881

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

6848

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 製品

6767

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 製品

6762

Ratio end mill RF 100 AL 90°

Ratio end mill RF 100 AL 90°. Designation: Ratio end mill RF 100 AL 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

9 製品

6763

Ratio end mill Superfinish RF 100 SF 90°

Ratio end mill Superfinish RF 100 SF 90°. Designation: Ratio end mill Superfinish RF 100 SF 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

8 製品

6883

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 製品

6700

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 製品

5653

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 製品

6799

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"at

5 製品

6833

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

12 製品

6847

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

10 製品

6870

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 製品

6856

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 製品

6734

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

6835

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 製品

6858

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 製品

6725

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

7 製品

6801

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

7 製品

6866

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

5 製品

6463

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

5 製品

6730

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 製品

6879

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 製品

6877

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

12 製品

6797

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

21 製品

6480

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

14 製品

6707

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 製品

6010

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 製品

5745

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 製品

6764

Ratio end mill RF 100 F 90°

Ratio end mill RF 100 F 90°. Designation: Ratio end mill RF 100 F 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 製品

6466

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 製品

5729

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 製品

6867

Ratio end mill RF 100 Skyliner

Ratio end mill RF 100 Skyliner. Designation: Ratio end mill RF 100 Skyliner, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

7 製品

6478

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

14 製品

6821

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 製品

6851

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

38 製品

6868

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

7 製品

6860

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

24 製品

6716

Pilot end mill RF 100 P

Pilot end mill RF 100 P. Designation: Pilot end mill RF 100 P, Diameter range: 1.400 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

24 製品

6709

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

9 製品

6706

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 製品

6824

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partia

31 製品

6766

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 製品

6838

Torus end mill G-Mold 65 T

Torus end mill G-Mold 65 T. Designation: Torus end mill G-Mold 65 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

37 製品

6832

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

12 製品

6822

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 製品

6837

Torus end mill G-Mold 65 T

Torus end mill G-Mold 65 T. Designation: Torus end mill G-Mold 65 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

37 製品

6765

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 製品

6864

Ratio end mill RF 100 7 Speed

Ratio end mill RF 100 7 Speed. Designation: Ratio end mill RF 100 7 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 製品

6732

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 製品

6854

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

37 製品

6803

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

19 製品

6850

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

38 製品

6820

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 製品

5735

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 製品

6823

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 製品

8234

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 製品

6974

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 製品

6960

Ratio end mill RF 100 Speed P

Ratio end mill RF 100 Speed P. Designation: Ratio end mill RF 100 Speed P, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 製品

8070

Micro-precision milling cutter RF 100 AL

8065

Micro-precision milling cutter RF 100 AL

Micro-precision milling cutter RF 100 AL. Designation: Micro-precision milling cutter RF 100 AL, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{

30 製品

171

Dies for BSW threads

Dies for BSW threads. Designation: Dies for BSW threads, EAN: 4031093007832, Cutting material: HSS, Surface: bright, Cutting direction: Right-hand

1 製品

175

Dies for BSP threads

Dies for BSP threads. Designation: Dies for BSP threads, Total length: 10.00 mm, EAN: 4031093008303, Cutting material: HSS, Surface: bright, Tolerance clas

11 製品

161

Dies for ISO metric fine threads

Dies for ISO metric fine threads. Designation: Dies for ISO metric fine threads, Total length: 10.00 mm, EAN: 4031093005289, Cutting material: HSS, Surface

24 製品

176

Dies for BSP threads

Dies for BSP threads. Designation: Dies for BSP threads, Total length: 22.00 mm, EAN: 4031093008563, Cutting material: HSS, Surface: bright, Tolerance clas

11 製品

414

Bridge reamer

Bridge reamer. Designation: Bridge reamer, Diameter range: 6.400 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

29 製品

415

Adjustable hand reamer

Adjustable hand reamer. Designation: Adjustable hand reamer, Diameter range: 4.000 mm – 59.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

56 製品

131

Dies for ISO metric fine threads

Dies for ISO metric fine threads. Designation: Dies for ISO metric fine threads, Total length: 11.00 mm, EAN: 4031093002646, Cutting material: HSS-E, Surfa

2 製品

431

Stepped machine reamer with cutting pilot

Stepped machine reamer with cutting pilot. Designation: Stepped machine reamer with cutting pilot, Diameter range: 5.000 mm – 38.000 mm, TABLE_INFO_PASSON:

8 製品

410

Machine taper reamer

Machine taper reamer. Designation: Machine taper reamer, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 製品

411

Machine taper reamer

Machine taper reamer. Designation: Machine taper reamer, Diameter range: 5.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 製品

408

Shell reamer

Shell reamer. Designation: Shell reamer, Diameter range: 25.000 mm – 100.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"}

38 製品

406

Quick helix reamer

Quick helix reamer. Designation: Quick helix reamer, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

30 製品

407

Shell reamer

Shell reamer. Designation: Shell reamer, Diameter range: 26.000 mm – 100.000 mm, Internal diameter: 32.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"}

40 製品

403

Quick helix reamer

Quick helix reamer. Designation: Quick helix reamer, Diameter range: 1.000 mm – 4.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"

14 製品

409

Shell reamer

Shell reamer. Designation: Shell reamer, Diameter range: 25.000 mm – 98.000 mm, Internal diameter: 50.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

32 製品

469

Quick helix reamer

Quick helix reamer. Designation: Quick helix reamer, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

21 製品

727

Shell reamer

Shell reamer. Designation: Shell reamer, Diameter range: 25.000 mm – 75.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

19 製品

743

Stepped machine reamer with cutting pilot

Stepped machine reamer with cutting pilot. Designation: Stepped machine reamer with cutting pilot, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON:

5 製品

455

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 12.030 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

75 製品

490

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

96 製品

6020

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 12.030 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

75 製品

6019

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

28 製品

301

Micro-precision drills without coolant ducts

80 製品

6016

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

27 製品

6017

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

99 製品

6018

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 0.970 mm – 12.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

80 製品

1018

AeroX split point drill

AeroX split point drill. Designation: AeroX split point drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

133 製品

6030

Short flute drill set

Short flute drill set. Designation: Short flute drill set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

1 製品

693

Short flute drill

Short flute drill. Designation: Short flute drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

30 製品

1137

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 6.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

3 製品

311

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 1.100 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

25 製品

634

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 7.800 mm – 49.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

25 製品

635

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 8.000 mm – 31.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

6 製品

623

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 10.000 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{

45 製品

6999

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 6.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

1 製品

6996

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 8.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

3 製品

464

Pilot for fine tolerances

Pilot for fine tolerances. Designation: Pilot for fine tolerances, Diameter range: 8.400 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

18 製品

465

Pilot for medial tolerances

Pilot for medial tolerances. Designation: Pilot for medial tolerances, Diameter range: 9.000 mm – 39.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

19 製品

466

Pilot for tapping size holes

Pilot for tapping size holes. Designation: Pilot for tapping size holes, Diameter range: 6.800 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

24 製品

533

Straight shank core drill

Straight shank core drill. Designation: Straight shank core drill, Diameter range: 3.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 9.400 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

14 製品

514

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 5.900 mm – 17.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

10 製品

505

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 4.200 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"

52 製品

541

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 9.000 mm – 22.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

7 製品

539

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 10.000 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

9 製品

569

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 7.500 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

5 製品

540

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

7 製品

536

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

6 製品

576

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 14.000 mm – 40.000 mm, TABLE

6 製品

537

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 11.000 mm – 29.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

6 製品

574

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 8.000 mm – 40.000 mm, TABLE_

9 製品

555

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 5.000 mm – 31.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

31 製品

538

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

7 製品

561

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 2.400 mm – 5.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr

22 製品

575

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 8.000 mm – 20.000 mm, TABLE_

6 製品

534

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 7.400 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

126 製品

578

Aircraft extension drill, 12 inches long

Aircraft extension drill, 12 inches long. Designation: Aircraft extension drill, 12 inches long, Diameter range: 1.500 mm – 8.500 mm, TABLE_INFO_PASSON: [{

49 製品

570

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 12.000 mm – 23.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

4 製品

577

Aircraft extension drill, 6 inches long

Aircraft extension drill, 6 inches long. Designation: Aircraft extension drill, 6 inches long, Diameter range: 1.500 mm – 8.500 mm, TABLE_INFO_PASSON: [{"a

58 製品

554

Straight shank drills double-ended

Straight shank drills double-ended. Designation: Straight shank drills double-ended, Diameter range: 1.450 mm – 10.500 mm, TABLE_INFO_PASSON: [{"attr":"P",

68 製品

551

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 5.500 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

91 製品

637

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 11.500 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

4 製品

638

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"}

2 製品

639

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 10.000 mm – 26.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

5 製品

579

Aircraft extension drill, 6 inches long

Aircraft extension drill, 6 inches long. Designation: Aircraft extension drill, 6 inches long, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"a

58 製品

580

Aircraft extension drill, 12 inches long

Aircraft extension drill, 12 inches long. Designation: Aircraft extension drill, 12 inches long, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{

54 製品

6403

Vent hole drill

Vent hole drill. Designation: Vent hole drill, Diameter range: 0.500 mm – 2.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"}

55 製品

636

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.600 mm – 17.200 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

5 製品

656

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 6.200 mm – 20.640 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

20 製品

666

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

100 製品

531

Taper pin drills

Taper pin drills. Designation: Taper pin drills, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

13 製品

532

Taper pin drills

Taper pin drills. Designation: Taper pin drills, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 製品

4282

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 製品

4566

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 製品

4283

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 製品

4565

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 製品

4390

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 製品

4284

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 製品

4684

StepPower combination drill tap

StepPower combination drill tap. Designation: StepPower combination drill tap, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

6 製品

303

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.160 mm – 1.950 mm, TABLE_INFO_PA

153 製品

741

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 15.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

1 製品

729

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 19.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr

14 製品

716

Masonry drill

Masonry drill. Designation: Masonry drill, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

8 製品

707

Carbide tipped spade drill

Carbide tipped spade drill. Designation: Carbide tipped spade drill, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

8 製品

4100

Deburring fork

Deburring fork. Designation: Deburring fork, Diameter range: 2.10 - 2.34, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"

15 製品

3899

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.100 mm – 3.000 mm, TABLE_INFO_PA

289 製品

6408

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 製品

5652

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.100 mm – 3.000 mm, TABLE_INFO_PA

27 製品

6400

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

55 製品

6405

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 製品

6401

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

55 製品

6412

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 製品

750

Straight shank core drill

Straight shank core drill. Designation: Straight shank core drill, Diameter range: 3.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

11 製品

701

Micro-precision drill AL without coolant ducts

Micro-precision drill AL without coolant ducts. Designation: Micro-precision drill AL without coolant ducts, Diameter range: 0.200 mm – 3.000 mm, TABLE_INF

65 製品

739

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 4.500 mm – 11.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

5 製品

738

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

6 製品

4101

Deburring fork

Deburring fork. Designation: Deburring fork, Diameter range: 3.70 - 4.24, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"

15 製品

2873

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

5 製品

2883

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 製品

2885

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

11 製品

2857

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 製品

4858

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 製品

8258

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

10 製品

8260

Tap with coolant ducts for UNC threads

7 製品

4598

MAS/BT DC hydro expansion chuck with axial plane

MAS/BT DC hydro expansion chuck with axial plane. Designation: MAS/BT DC hydro expansion chuck with axial plane, Internal diameter: 18.00 mm, TABLE_INFO_PA

8 製品

4577

Synchro tapping chuck MAS/BT for internal cooling

Synchro tapping chuck MAS/BT for internal cooling. Designation: Synchro tapping chuck MAS/BT for internal cooling, Diameter range: 6.0 - 16.0, Internal dia

7 製品

4597

SK hydro expansion chuck, slim design 3°

SK hydro expansion chuck, slim design 3°. Designation: SK hydro expansion chuck, slim design 3°, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P

16 製品

4601

Synchro tapping chuck HSK-A for internal cooling

Synchro tapping chuck HSK-A for internal cooling. Designation: Synchro tapping chuck HSK-A for internal cooling, Internal diameter: 32.00 mm, TABLE_INFO_PA

9 製品

4561

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 10.00 mm, TABLE_INFO_

10 製品

4564

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 14.

27 製品

4563

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 18.00 mm, TABLE_INFO_

27 製品

4562

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 32.

10 製品

28487

Aluminium milling cutter with indexable inserts, screw-in threads

Aluminium milling cutter with indexable inserts, screw-in threads. Designation: Aluminium milling cutter with indexable inserts, screw-in threads, Diameter

3 製品

28486

Aluminium milling cutter with indexable inserts, shell milling cutter

Aluminium milling cutter with indexable inserts, shell milling cutter. Designation: Aluminium milling cutter with indexable inserts, shell milling cutter,

4 製品

4230

MAS/BT milling arbor

MAS/BT milling arbor. Designation: MAS/BT milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

31 製品

25911

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 73.40 mm, EAN: 4049844612136, Indicator new/addition: New, Standard: Company std.

1 製品

25931

Torx screwdriver

Torx screwdriver. Designation: Torx screwdriver, Total length: 67.00 mm, EAN: 4049844784345, Indicator new/addition: New, Standard: Company std.

3 製品

4868

Socket

Socket. Designation: Socket, Total length: 22.00 mm, EAN: 4049844787308, Indicator new/addition: New

5 製品

4869

Pull stud

Pull stud. Designation: Pull stud, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

6 製品

4889

Pull stud

Pull stud. Designation: Pull stud, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

6 製品

4203

Coolant distribution screw

Coolant distribution screw. Designation: Coolant distribution screw, Total length: 58.00 mm, EAN: 4049844229839, Indicator new/addition: Addition, Standard

8 製品

8170

Mounting key BT 800

Mounting key BT 800. Designation: Mounting key BT 800, EAN: 4049844972889, Indicator new/addition: New, Standard: Company std.

17 製品

8192

Countersink holder with depth stop

Countersink holder with depth stop. Designation: Countersink holder with depth stop, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

1 製品

8358

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

8357

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

8336

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 製品

8359

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

11 製品

8343

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 製品

8344

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 製品

8334

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

8335

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

8364

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 製品

8366

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 製品

25930

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

3 製品

25914

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

3 製品

8313

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 製品

8314

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 製品

28401

Clamping screw

Clamping screw. Designation: Clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

3 製品

6174

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 製品

6176

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 製品

6175

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 製品

6924

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

19 製品

28485

Aluminium milling cutter with indexable inserts, straight shank

Aluminium milling cutter with indexable inserts, straight shank. Designation: Aluminium milling cutter with indexable inserts, straight shank, Diameter ran

2 製品

4525

Synchro tapping chuck with straight shank for internal cooling

Synchro tapping chuck with straight shank for internal cooling. Designation: Synchro tapping chuck with straight shank for internal cooling, Diameter range

8 製品

8346

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 製品

8341

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 製品

8347

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 製品

8342

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 製品

8337

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 製品

8333

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

8332

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 製品

8355

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 製品

8345

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 製品

8339

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 製品

8338

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 製品

8331

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 製品

8356

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 製品

8360

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 製品

1919

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

14 製品

8367

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 製品

8361

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 製品

2441

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 製品

1904

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

10 製品

8368

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 製品

8365

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 製品

8362

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 製品

2863

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 製品

313

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

18 製品

805

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

12 製品

8264

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

5 製品

8286

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

12 製品

852

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

29 製品

8265

Tap with coolant ducts for UNF threads

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

5 製品

6557

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 製品

8282

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

17 製品

6565

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

17 製品

8081

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 製品

8363

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

33 製品

5691

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

44 製品

5694

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 製品

5693

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

42 製品

5692

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

51 製品

5682

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 製品

5688

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

44 製品

5164

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

51 製品

5681

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 製品

28504

SOLX indexable insert, single-sided external

SOLX indexable insert, single-sided external. Designation: SOLX indexable insert, single-sided external, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 製品

28505

SOLX indexable insert, single-sided external

SOLX indexable insert, single-sided external. Designation: SOLX indexable insert, single-sided external, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 製品

28508

XOLX indexable insert single-sided, internal

XOLX indexable insert single-sided, internal. Designation: XOLX indexable insert single-sided, internal, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 製品

26820

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

5 製品

26824

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 製品

26907

Cutting insert for drilling and boring

Cutting insert for drilling and boring. Designation: Cutting insert for drilling and boring, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 製品

26816

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 製品

26826

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 製品

27291

Cutting insert for drilling and boring

Cutting insert for drilling and boring. Designation: Cutting insert for drilling and boring, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 製品

26818

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 製品

28509

XOLX indexable insert single-sided, internal

XOLX indexable insert single-sided, internal. Designation: XOLX indexable insert single-sided, internal, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 製品

26822

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

90° Front/back deburrer. Designation: 90° Front/back deburrer, Diameter range: 2.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

29 製品

6166

Ball nose end mill G-Mold 55 B short shank

Ball nose end mill G-Mold 55 B short shank. Designation: Ball nose end mill G-Mold 55 B short shank, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON

6 製品

8292

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

7 製品

6578

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 製品

6577

Coolant duct tap for ISO metric fine threads

9 製品

8085

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

9 製品

6829

Micro-precision milling cutter MicroMill µ 55 U

Micro-precision milling cutter MicroMill µ 55 U. Designation: Micro-precision milling cutter MicroMill µ 55 U, Diameter range: 0.200 mm – 3.000 mm, TABLE_I

45 製品

28488

XDHT indexable insert

XDHT indexable insert. Designation: XDHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

7 製品

6149

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

10 製品

4477

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 製品

6148

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

10 製品

4880

Micro thread milling cutter for UNC/UNF threads

Micro thread milling cutter for UNC/UNF threads. Designation: Micro thread milling cutter for UNC/UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

24 製品

6469

Ratio end mill set RF 100 Sharp extra short

Ratio end mill set RF 100 Sharp extra short. Designation: Ratio end mill set RF 100 Sharp extra short, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"at

1 製品

6808

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

19 製品

6167

Ball nose end mill G-Mold 55 B short shank

Ball nose end mill G-Mold 55 B short shank. Designation: Ball nose end mill G-Mold 55 B short shank, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON

6 製品

6165

Ratio end mill RF 100 Sharp short shank

Ratio end mill RF 100 Sharp short shank. Designation: Ratio end mill RF 100 Sharp short shank, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"a

5 製品

6468

Ratio end mill set RF 100 Sharp extra short

Ratio end mill set RF 100 Sharp extra short. Designation: Ratio end mill set RF 100 Sharp extra short, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"at

1 製品

6164

Ratio end mill RF 100 Sharp short shank

Ratio end mill RF 100 Sharp short shank. Designation: Ratio end mill RF 100 Sharp short shank, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"a

5 製品

6691

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

54 製品

6163

Ratio end mill RF 100 Sharp extra short short shank

Ratio end mill RF 100 Sharp extra short short shank. Designation: Ratio end mill RF 100 Sharp extra short short shank, Diameter range: 0.800 mm – 3.000 mm,

11 製品

6809

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

15 製品

6692

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

52 製品

9039

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 製品

9033

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 製品

9029

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

7 製品

9031

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 製品

9026

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 製品

9051

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 製品

9042

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 製品

9047

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 製品

9046

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 製品

9030

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 製品

9035

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 製品

9045

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 製品

9041

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 製品

9034

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 製品

9002

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 製品

9014

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 製品

9038

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 製品

9010

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

10 製品

9032

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 製品

9006

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 製品

9022

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

10 製品

9037

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

11 製品

9018

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 製品

9043

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 製品

9044

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 製品

9036

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

12 製品

9040

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

8 製品

9197

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

42 製品

9195

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 製品

9194

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 製品

9198

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

42 製品

9193

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 製品

9191

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P

33 製品

9190

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P

22 製品

9196

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 製品

9192

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P

41 製品

6060

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

64 製品

5234

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

97 製品

5689

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

97 製品

5690

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

64 製品

5812

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

93 製品

5639

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 製品

5669

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 製品

5641

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 製品

5460

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 製品

5023

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 製品

5018

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 製品

6061

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 製品

5022

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 製品

5642

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 製品

5640

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 製品

4605

Reduction sleeve for hydro synchro tapping chucks

Reduction sleeve for hydro synchro tapping chucks. Designation: Reduction sleeve for hydro synchro tapping chucks, Diameter range: 4.005 mm – 32.000 mm, In

84 製品

4606

Reduction sleeve for hydro synchro tapping chucks

Reduction sleeve for hydro synchro tapping chucks. Designation: Reduction sleeve for hydro synchro tapping chucks, Diameter range: 12.000 mm – 32.000 mm, I

77 製品

26700

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 製品

26702

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

5 製品

26703

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

5 製品

26104

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 製品

26701

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 製品

26106

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

6 製品

26105

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 製品

26107

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 製品

26202

Reinforced parting off blade without IC

Reinforced parting off blade without IC. Designation: Reinforced parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 製品

26207

Reinforced parting off blade with IC

Reinforced parting off blade with IC. Designation: Reinforced parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

2 製品

26203

Reinforced parting off blade without IC

Reinforced parting off blade without IC. Designation: Reinforced parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 製品

26206

Reinforced parting off blade with IC

Reinforced parting off blade with IC. Designation: Reinforced parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

2 製品

6095

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 5.556 mm, TABLE_INFO_PASSON: [{"att

44 製品

6094

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"att

55 製品

6092

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

79 製品

6091

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

79 製品

6093

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 10.319 mm, TABLE_INFO_PASSON: [{"at

71 製品

5633

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

35 製品

5647

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

50 製品

5024

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 0.900 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

26 製品

5684

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 0.900 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

15 製品

5020

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

35 製品

5632

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

25 製品

5026

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

29 製品

5648

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

37 製品

5021

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

38 製品

5638

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

38 製品

6075

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 6.500 mm, TABLE_INFO_PASSON: [{"attr":"P"

51 製品

5685

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

77 製品

5687

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

37 製品

5686

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

50 製品

5646

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

77 製品

6072

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 製品

6071

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 製品

5637

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

29 製品

6074

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 8.731 mm, TABLE_INFO_PASSON: [{"attr":"P"

64 製品

6073

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 製品

6062

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

146 製品

6063

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

146 製品

6064

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

138 製品

6407

Step ratio drill with coolant ducts

Step ratio drill with coolant ducts. Designation: Step ratio drill with coolant ducts, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P

16 製品

7052

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

127 製品

6591

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [

124 製品

6589

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

191 製品

8512

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 製品

8514

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 製品

8518

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

148 製品

8513

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 製品

6590

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

191 製品

6592

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [

124 製品

4870

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

18 製品

6939

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 3.500 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

22 製品

6459

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

83 製品

6461

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

83 製品

6457

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

77 製品

6951

Circular milling cutter full radius

Circular milling cutter full radius. Designation: Circular milling cutter full radius, Diameter range: 3.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"attr":"P

13 製品

6815

Ball nose end mill G-Mold µ 65 B

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19 製品

6949

Circular milling cutter corner chamfer

Circular milling cutter corner chamfer. Designation: Circular milling cutter corner chamfer, Diameter range: 3.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"at

12 製品

6950

Circular milling cutter corner radius

Circular milling cutter corner radius. Designation: Circular milling cutter corner radius, Diameter range: 7.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"attr

11 製品

6172

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

13 製品

6713

90° Chamfering milling cutter

30 製品

6456

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 0.800 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

135 製品

6458

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

119 製品

6550

Micro HPC milling cutter

Micro HPC milling cutter. Designation: Micro HPC milling cutter, Diameter range: 0.300 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 製品

6460

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

119 製品

6938

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 0.800 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

33 製品

8148

Promotion – Modular drill with interchangeable head BT 800 3xD

Promotion – Modular drill with interchangeable head BT 800 3xD. Designation: Promotion – Modular drill with interchangeable head BT 800 3xD, Diameter range

161 製品

8149

Promotion – Modular drill with interchangeable head BT 800 5xD

Promotion – Modular drill with interchangeable head BT 800 5xD. Designation: Promotion – Modular drill with interchangeable head BT 800 5xD, Diameter range

161 製品

6162

Micro-precision drill without coolant ducts with short shank

Micro-precision drill without coolant ducts with short shank. Designation: Micro-precision drill without coolant ducts with short shank, Diameter range: 0.

55 製品

6161

Micro-precision drill without coolant ducts with short shank

Micro-precision drill without coolant ducts with short shank. Designation: Micro-precision drill without coolant ducts with short shank, Diameter range: 0.

55 製品

6488

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

52 製品

7053

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.800 mm – 3.000 mm, TABLE_INFO_PA

45 製品

6489

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 製品

6487

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

66 製品

6493

Micro-precision drill XL with coolant ducts

Micro-precision drill XL with coolant ducts. Designation: Micro-precision drill XL with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASS

47 製品

6491

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 製品

6490

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 製品

6494

Micro-precision drill XL with coolant ducts

Micro-precision drill XL with coolant ducts. Designation: Micro-precision drill XL with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASS

47 製品

8525

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

61 製品

8526

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 製品

8528

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 製品

8527

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 製品

6045

Straight-fluted drill, 4-fluted VB 100 P

Straight-fluted drill, 4-fluted VB 100 P. Designation: Straight-fluted drill, 4-fluted VB 100 P, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [

77 製品

6044

Straight-fluted drill, 4-fluted VB 100 P

Straight-fluted drill, 4-fluted VB 100 P. Designation: Straight-fluted drill, 4-fluted VB 100 P, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [

77 製品

6497

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 製品

DEMO-RT100U

Machine tap RT 100 U, universal

Universal machine tap for through and blind holes in a wide range of materials. Spiral point and spiral flute versions available.

5 製品

DEMO-6497

Solid carbide drill 5xD, internal coolant

High-performance solid carbide drill for steel and cast iron. Four-facet point, internal coolant channels, TiAlN coating. Suitable for depths up to 5xD.

5 製品