← カタログ
画像をホバーして拡大
6917
HSC ball nose hard profile cutter GA 200 A
HSC ball nose hard profile cutter GA 200 A. Designation: HSC ball nose hard profile cutter GA 200 A, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844811270, Cutting material: Solid carbide, Surface: Carbo+, Type: W, Helix angle: 35, Back rake angle: 15, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling
技術仕様
- EAN
- 4049844811270
- Type
- W
- Surface
- Carbo+
- Designation
- HSC ball nose hard profile cutter GA 200 A
- Helix angle
- 35
- Diameter range
- 3.000 mm – 16.000 mm
- Feed direction
- with drilling
- Back rake angle
- 15
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 2
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 6917 16.000 | 32.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | 要問い合わせ | |
| 6917 4.000 | 9.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | 要問い合わせ | |
| 6917 8.000 | 17.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ | |
| 6917 6.000 | 14.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | 要問い合わせ | |
| 6917 10.000 | 21.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 6917 5.000 | 11.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | 要問い合わせ | |
| 6917 12.000 | 25.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | 要問い合わせ | |
| 6917 3.000 | 8.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | 要問い合わせ |