Ratio end mill RF 100 F 90°

Ratio end mill RF 100 F 90°. Designation: Ratio end mill RF 100 F 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844154339, Cutting material: Solid carbide, Surface: nanoA, Type: N, Helix angle: 40/42, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling

技術仕様

EAN: 4049844154339
Type: N
Surface: nanoA
Designation: Ratio end mill RF 100 F 90°
Helix angle: 40/42
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
6764 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	要問い合わせ
6764 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	要問い合わせ
6764 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	要問い合わせ
6764 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	要問い合わせ
6764 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	要問い合わせ
6764 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	要問い合わせ
6764 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	要問い合わせ
6764 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	要問い合わせ
6764 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	要問い合わせ