← カタログ
画像をホバーして拡大
3202
Ratio end mill RF 100 AL
Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093674676, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Helix angle: 40/42, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling
技術仕様
- EAN
- 4031093674676
- Surface
- bright
- Designation
- Ratio end mill RF 100 AL
- Helix angle
- 40/42
- Diameter range
- 4.000 mm – 20.000 mm
- Feed direction
- with drilling
- Product family
- RF 100 A
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 3202 4.000 | 14.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | 要問い合わせ | |
| 3202 10.000 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 3202 5.000 | 16.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | 要問い合わせ | |
| 3202 16.000 | 42.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | 要問い合わせ | |
| 3202 20.000 | 50.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | 要問い合わせ | |
| 3202 12.000 | 34.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | 要問い合わせ | |
| 3202 8.000 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ | |
| 3202 6.000 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | 要問い合わせ |