← カタログ
画像をホバーして拡大
3171
Slot drill XL (3-fluted)
Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093664806, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 3, Corner design: Schneidecke 90°, Feed direction: with drilling
技術仕様
- EAN
- 4031093664806
- Type
- N
- Designation
- Slot drill XL (3-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 4.763 mm – 25.400 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- extra long
- Number of cutting edges range (from/to)
- 3
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 3171 6.350 | 45.50 mm | 56.10 mm | 101.60 mm | 6.35 mm | 6.35 mm | 要問い合わせ | |
| 3171 19.050 | 86.00 mm | 66.40 mm | 152.40 mm | 19.05 mm | 19.05 mm | 要問い合わせ | |
| 3171 11.110 | 57.00 mm | 70.00 mm | 127.00 mm | 11.11 mm | 11.11 mm | 要問い合わせ | |
| 3171 15.870 | 84.00 mm | 68.40 mm | 152.40 mm | 15.88 mm | 15.88 mm | 要問い合わせ | |
| 3171 4.760 | 34.00 mm | 42.20 mm | 76.20 mm | 4.76 mm | 4.76 mm | 要問い合わせ | |
| 3171 25.400 | 90.00 mm | 62.40 mm | 152.40 mm | 25.40 mm | 25.40 mm | 要問い合わせ | |
| 3171 9.520 | 47.50 mm | 54.10 mm | 101.60 mm | 9.53 mm | 9.53 mm | 要問い合わせ | |
| 3171 12.700 | 84.00 mm | 68.40 mm | 152.40 mm | 12.70 mm | 12.70 mm | 要問い合わせ | |
| 3171 7.940 | 45.50 mm | 56.10 mm | 101.60 mm | 7.94 mm | 7.94 mm | 要問い合わせ |