Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844492691, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38, Back rake angle: 12, Length picto milling: medium, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB, Feed direction: with drilling

技術仕様

EAN: 4049844492691
Type: N
Surface: AlCrN
Designation: Ratio end mill RF 100 Sharp
Helix angle: 38
Diameter range: 1.590 mm – 25.400 mm
Feed direction: with drilling
Back rake angle: 12
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: medium
Type of machine interface: ~HB
Number of cutting edges range (from/to): 4

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
6485 6.350	23.18 mm	35.00 mm	76.20 mm	6.35 mm	6.35 mm	要問い合わせ
6485 9.520	31.50 mm	36.00 mm	88.90 mm	9.53 mm	9.53 mm	要問い合わせ
6485 7.940	27.78 mm	36.00 mm	82.55 mm	7.94 mm	7.94 mm	要問い合わせ
6485 1.590	5.88 mm	34.10 mm	50.80 mm	4.76 mm	1.59 mm	要問い合わせ
6485 11.110	38.86 mm	37.20 mm	101.60 mm	11.11 mm	11.11 mm	要問い合わせ
6485 12.700	39.88 mm	45.20 mm	101.60 mm	12.70 mm	12.70 mm	要問い合わせ
6485 19.050	52.70 mm	51.60 mm	127.00 mm	19.05 mm	19.05 mm	要問い合わせ
6485 4.760	18.97 mm	35.00 mm	76.20 mm	6.35 mm	4.76 mm	要問い合わせ
6485 3.170	11.75 mm	28.20 mm	50.80 mm	4.76 mm	3.17 mm	要問い合わせ
6485 15.870	48.26 mm	48.40 mm	127.00 mm	15.88 mm	15.88 mm	要問い合わせ
6485 25.400	66.04 mm	58.00 mm	152.40 mm	25.40 mm	25.40 mm	要問い合わせ