← カタログ
画像をホバーして拡大
3181
Multi-tooth end mill GH 100 U
Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"partial"}], EAN: 4031093665063, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: extra long, Number of cutting edges range (from/to): 6-8, Corner design: Schneidecke 90°
技術仕様
- EAN
- 4031093665063
- Type
- N
- Designation
- Multi-tooth end mill GH 100 U
- Helix angle
- 45
- Corner design
- Schneidecke 90°
- Diameter range
- 6.350 mm – 19.050 mm
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"partial"}]
- Length picto milling
- extra long
- Number of cutting edges range (from/to)
- 6-8
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 3181 9.520 | 32.31 mm | 43.89 mm | 76.20 mm | 9.53 mm | 9.53 mm | 要問い合わせ | |
| 3181 12.700 | 56.08 mm | 58.22 mm | 114.30 mm | 12.70 mm | 12.70 mm | 要問い合わせ | |
| 3181 19.050 | 63.29 mm | 63.71 mm | 127.00 mm | 19.05 mm | 19.05 mm | 要問い合わせ | |
| 3181 7.940 | 31.68 mm | 44.52 mm | 76.20 mm | 7.94 mm | 7.94 mm | 要問い合わせ | |
| 3181 15.870 | 63.35 mm | 63.65 mm | 127.00 mm | 15.88 mm | 15.88 mm | 要問い合わせ | |
| 3181 6.350 | 31.04 mm | 45.16 mm | 76.20 mm | 6.35 mm | 6.35 mm | 要問い合わせ |