Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844492738, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38, Back rake angle: 12, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB, Feed direction: with drilling

技術仕様

EAN: 4049844492738
Type: N
Surface: AlCrN
Designation: Ratio end mill RF 100 Sharp
Helix angle: 38
Diameter range: 1.590 mm – 25.400 mm
Feed direction: with drilling
Back rake angle: 12
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: ~HB
Number of cutting edges range (from/to): 4

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
6484 25.400	54.61 mm	58.00 mm	114.30 mm	25.40 mm	25.40 mm	要問い合わせ
6484 6.350	21.91 mm	35.00 mm	63.50 mm	6.35 mm	6.35 mm	要問い合わせ
6484 3.170	11.75 mm	34.50 mm	50.80 mm	4.76 mm	3.17 mm	要問い合わせ
6484 4.760	18.02 mm	35.00 mm	63.50 mm	6.35 mm	4.76 mm	要問い合わせ
6484 12.700	36.83 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	要問い合わせ
6484 7.940	24.21 mm	36.00 mm	63.50 mm	7.94 mm	7.94 mm	要問い合わせ
6484 11.110	29.84 mm	37.20 mm	69.85 mm	11.11 mm	11.11 mm	要問い合わせ
6484 15.870	44.45 mm	48.40 mm	95.25 mm	15.88 mm	15.88 mm	要問い合わせ
6484 9.520	29.21 mm	36.00 mm	69.85 mm	9.53 mm	9.53 mm	要問い合わせ
6484 19.050	48.90 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	要問い合わせ