← カタログ
画像をホバーして拡大
6875
Ratio end mill RF 100 Diver
Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844287044, Cutting material: Solid carbide, Surface: Signum, Type: N, Helix angle: 36/38/37, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB, Feed direction: with drilling
技術仕様
- EAN
- 4049844287044
- Type
- N
- Surface
- Signum
- Designation
- Ratio end mill RF 100 Diver
- Helix angle
- 36/38/37
- Diameter range
- 6.350 mm – 19.050 mm
- Feed direction
- with drilling
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- ~HB
- Number of cutting edges range (from/to)
- 4
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 6875 19.050 | 51.34 mm | 51.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | 要問い合わせ | |
| 6875 9.520 | 28.87 mm | 34.63 mm | 63.50 mm | 9.53 mm | 9.53 mm | 要問い合わせ | |
| 6875 6.350 | 17.14 mm | 46.35 mm | 63.50 mm | 6.35 mm | 6.35 mm | 要問い合わせ | |
| 6875 7.940 | 24.61 mm | 38.89 mm | 63.50 mm | 7.94 mm | 7.94 mm | 要問い合わせ | |
| 6875 15.870 | 43.11 mm | 48.40 mm | 88.90 mm | 15.88 mm | 15.88 mm | 要問い合わせ | |
| 6875 12.700 | 34.29 mm | 45.20 mm | 88.90 mm | 12.70 mm | 12.70 mm | 要問い合わせ |