← カタログ
画像をホバーして拡大
19959
End mill (4-fluted)
End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844291096, Cutting material: Solid carbide, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: Cyl, Feed direction: with drilling
技術仕様
- EAN
- 4049844291096
- Type
- N
- Designation
- End mill (4-fluted)
- Helix angle
- 35/38
- Diameter range
- 3.175 mm – 25.400 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- Cyl
- Number of cutting edges range (from/to)
- 4
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 19959 19.050 | 50.00 mm | 51.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | 要問い合わせ | |
| 19959 15.870 | 42.00 mm | 46.90 mm | 88.90 mm | 15.88 mm | 15.88 mm | 要問い合わせ | |
| 19959 7.940 | 25.50 mm | 38.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | 要問い合わせ | |
| 19959 6.350 | 24.00 mm | 39.50 mm | 63.50 mm | 6.35 mm | 6.35 mm | 要問い合わせ | |
| 19959 9.520 | 31.50 mm | 32.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | 要問い合わせ | |
| 19959 12.700 | 34.50 mm | 41.70 mm | 76.20 mm | 12.70 mm | 12.70 mm | 要問い合わせ | |
| 19959 25.400 | 54.00 mm | 47.60 mm | 101.60 mm | 25.40 mm | 25.40 mm | 要問い合わせ | |
| 19959 3.170 | 12.50 mm | 25.60 mm | 38.10 mm | 3.17 mm | 3.17 mm | 要問い合わせ | |
| 19959 11.110 | 32.50 mm | 37.35 mm | 69.85 mm | 11.11 mm | 11.11 mm | 要問い合わせ | |
| 19959 4.760 | 19.50 mm | 31.30 mm | 50.80 mm | 4.76 mm | 4.76 mm | 要問い合わせ |