← カタログ
画像をホバーして拡大
484
Counterbore with pilots for tapping size holes
Counterbore with pilots for tapping size holes. Designation: Counterbore with pilots for tapping size holes, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093125857, Cutting material: HSS, Surface: bright, Standard: DIN 373, Cutting direction: Right-hand
技術仕様
- EAN
- 4031093125857
- Surface
- bright
- Standard
- DIN 373
- Designation
- Counterbore with pilots for tapping size holes
- Diameter range
- 6.000 mm – 20.000 mm
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 484 18.000 | 43.00 mm | 40.00 mm | 100.00 mm | 12.50 mm | 18.00 mm | 要問い合わせ | |
| 484 15.000 | 43.00 mm | 40.00 mm | 100.00 mm | 12.50 mm | 15.00 mm | 要問い合わせ | |
| 484 20.000 | 43.00 mm | 40.00 mm | 100.00 mm | 12.50 mm | 20.00 mm | 要問い合わせ | |
| 484 10.000 | 35.00 mm | 35.50 mm | 80.00 mm | 8.00 mm | 10.00 mm | 要問い合わせ | |
| 484 11.000 | 35.00 mm | 35.50 mm | 80.00 mm | 8.00 mm | 11.00 mm | 要問い合わせ | |
| 484 8.000 | 26.00 mm | 31.50 mm | 71.00 mm | 5.00 mm | 8.00 mm | 要問い合わせ | |
| 484 6.000 | 26.00 mm | 31.50 mm | 71.00 mm | 5.00 mm | 6.00 mm | 要問い合わせ |