Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4049844079076, Cutting material: Solid carbide, Surface: nanoA, Product family: RF 100 VA, Type: N, Helix angle: 36/38, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

技術仕様

EAN: 4049844079076
Type: N
Surface: nanoA
Designation: Ratio end mill RF 100 VA
Helix angle: 36/38
Diameter range: 5.000 mm – 25.000 mm
Feed direction: with drilling
Product family: RF 100 VA
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
3696 18.000	43.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	要問い合わせ
3696 7.000	21.00 mm	36.00 mm	63.00 mm	8.00 mm	7.00 mm	要問い合わせ
3696 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	要問い合わせ
3696 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	要問い合わせ
3696 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	要問い合わせ
3696 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	要問い合わせ
3696 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	要問い合わせ
3696 9.000	25.00 mm	40.00 mm	72.00 mm	10.00 mm	9.00 mm	要問い合わせ
3696 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	要問い合わせ
3696 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	要問い合わせ
3696 14.000	35.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	要問い合わせ
3696 25.000	60.00 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	要問い合わせ