← カタログ
画像をホバーして拡大
3173
Slot drill GH 100 U (3-fluted)
Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093664929, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 3, Feed direction: with drilling
技術仕様
- EAN
- 4031093664929
- Type
- N
- Designation
- Slot drill GH 100 U (3-fluted)
- Helix angle
- 45
- Diameter range
- 3.175 mm – 25.400 mm
- Feed direction
- with drilling
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Number of cutting edges range (from/to)
- 3
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 3173 9.520 | 33.50 mm | 30.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | 要問い合わせ | |
| 3173 25.400 | 54.00 mm | 47.60 mm | 101.60 mm | 25.40 mm | 25.40 mm | 要問い合わせ | |
| 3173 11.110 | 34.50 mm | 35.35 mm | 69.85 mm | 11.11 mm | 11.11 mm | 要問い合わせ | |
| 3173 4.760 | 20.00 mm | 30.80 mm | 50.80 mm | 4.76 mm | 4.76 mm | 要問い合わせ | |
| 3173 19.050 | 52.00 mm | 49.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | 要問い合わせ | |
| 3173 15.870 | 43.00 mm | 45.90 mm | 88.90 mm | 15.88 mm | 15.88 mm | 要問い合わせ | |
| 3173 6.350 | 26.00 mm | 37.50 mm | 63.50 mm | 6.35 mm | 6.35 mm | 要問い合わせ | |
| 3173 3.170 | 12.50 mm | 25.60 mm | 38.10 mm | 3.17 mm | 3.17 mm | 要問い合わせ | |
| 3173 7.940 | 27.50 mm | 36.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | 要問い合わせ | |
| 3173 12.700 | 35.50 mm | 40.70 mm | 76.20 mm | 12.70 mm | 12.70 mm | 要問い合わせ |