Ratio end mill RF 100 AL 90°

Ratio end mill RF 100 AL 90°. Designation: Ratio end mill RF 100 AL 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844154490, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Helix angle: 40/42, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling

技術仕様

EAN: 4049844154490
Surface: bright
Designation: Ratio end mill RF 100 AL 90°
Helix angle: 40/42
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Product family: RF 100 A
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
6762 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	要問い合わせ
6762 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	要問い合わせ
6762 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	要問い合わせ
6762 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	要問い合わせ
6762 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	要問い合わせ
6762 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	要問い合わせ
6762 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	要問い合わせ
6762 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	要問い合わせ
6762 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	要問い合わせ