← カタログ
画像をホバーして拡大
6948
Finishing end mill with corner radius G-Mold 65 FR
Finishing end mill with corner radius G-Mold 65 FR. Designation: Finishing end mill with corner radius G-Mold 65 FR, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844500631, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 42, Back rake angle: -3, Length picto milling: extra long, Number of cutting edges range (from/to): 6, Type of machine interface: ~HA/HA
技術仕様
- EAN
- 4049844500631
- Type
- H
- Surface
- Signum
- Designation
- Finishing end mill with corner radius G-Mold 65 FR
- Helix angle
- 42
- Diameter range
- 3.000 mm – 16.000 mm
- Back rake angle
- -3
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- extra long
- Type of machine interface
- ~HA/HA
- Number of cutting edges range (from/to)
- 6
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 6948 4.002 | 13.60 mm | 36.00 mm | 75.00 mm | 6.00 mm | 4.00 mm | 要問い合わせ | |
| 6948 16.010 | 39.20 mm | 48.00 mm | 150.00 mm | 16.00 mm | 16.00 mm | 要問い合わせ | |
| 6948 8.005 | 22.60 mm | 36.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ | |
| 6948 6.005 | 16.90 mm | 36.00 mm | 80.00 mm | 6.00 mm | 6.00 mm | 要問い合わせ | |
| 6948 10.005 | 26.50 mm | 40.00 mm | 120.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 6948 5.002 | 16.25 mm | 36.00 mm | 75.00 mm | 6.00 mm | 5.00 mm | 要問い合わせ | |
| 6948 12.010 | 31.40 mm | 45.00 mm | 150.00 mm | 12.00 mm | 12.00 mm | 要問い合わせ | |
| 6948 3.002 | 9.95 mm | 45.70 mm | 75.00 mm | 6.00 mm | 3.00 mm | 要問い合わせ |