Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093674614, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Type of machine interface: HA

技術仕様

EAN: 4031093674614
Type: H
Surface: Signum
Designation: Hard multi-tooth end mill GH 100 H
Helix angle: 55
Diameter range: 3.000 mm – 20.000 mm
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 6-8

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
3715 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	要問い合わせ
3715 18.001	46.00 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	要問い合わせ
3715 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	要問い合わせ
3715 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	要問い合わせ
3715 18.000	40.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	要問い合わせ
3715 4.000	14.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	要問い合わせ
3715 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	要問い合わせ
3715 14.001	38.00 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	要問い合わせ
3715 20.000	46.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	要問い合わせ
3715 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	要問い合わせ
3715 12.000	32.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	要問い合わせ
3715 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	要問い合わせ
3715 16.000	39.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	要問い合わせ