← カタログ
画像をホバーして拡大
4246
Ball nose hard profile cutter GF 300 B
Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844152717, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 30, Back rake angle: -7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA/HA, Feed direction: with drilling
技術仕様
- EAN
- 4049844152717
- Type
- H
- Surface
- Signum
- Designation
- Ball nose hard profile cutter GF 300 B
- Helix angle
- 30
- Diameter range
- 2.000 mm – 12.000 mm
- Feed direction
- with drilling
- Back rake angle
- -7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- ~HA/HA
- Number of cutting edges range (from/to)
- 4
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 4246 8.000 | 15.16 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ | |
| 4246 6.000 | 12.12 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | 要問い合わせ | |
| 4246 4.000 | 8.20 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | 要問い合わせ | |
| 4246 12.000 | 22.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | 要問い合わせ | |
| 4246 5.000 | 10.25 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | 要問い合わせ | |
| 4246 10.000 | 18.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 4246 3.000 | 6.65 mm | 36.10 mm | 57.00 mm | 6.00 mm | 3.00 mm | 要問い合わせ | |
| 4246 2.000 | 5.10 mm | 35.90 mm | 57.00 mm | 6.00 mm | 2.00 mm | 要問い合わせ |