End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093364638, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°

技術仕様

EAN: 4031093364638
Type: N
Surface: bright
Designation: End mill XL (4-fluted)
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: extra long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
3012 14.000	57.88 mm	45.00 mm	150.00 mm	14.00 mm	14.00 mm	要問い合わせ
3012 14.001	77.88 mm	48.00 mm	150.00 mm	16.00 mm	14.00 mm	要問い合わせ
3012 18.001	81.56 mm	50.00 mm	150.00 mm	20.00 mm	18.00 mm	要問い合わせ
3012 6.000	36.00 mm	36.00 mm	75.00 mm	6.00 mm	6.00 mm	要問い合わせ
3012 12.000	56.04 mm	45.00 mm	150.00 mm	12.00 mm	12.00 mm	要問い合わせ
3012 8.000	48.00 mm	36.00 mm	100.00 mm	8.00 mm	8.00 mm	要問い合わせ
3012 16.000	79.72 mm	48.00 mm	151.00 mm	16.00 mm	16.00 mm	要問い合わせ
3012 5.000	35.00 mm	28.00 mm	75.00 mm	5.00 mm	5.00 mm	要問い合わせ
3012 20.000	83.40 mm	50.00 mm	150.00 mm	20.00 mm	20.00 mm	要問い合わせ
3012 4.000	29.00 mm	28.00 mm	75.00 mm	4.00 mm	4.00 mm	要問い合わせ
3012 18.000	81.56 mm	48.00 mm	150.00 mm	18.00 mm	18.00 mm	要問い合わせ
3012 10.000	50.00 mm	40.00 mm	100.00 mm	10.00 mm	10.00 mm	要問い合わせ
3012 3.000	23.00 mm	28.00 mm	75.00 mm	3.00 mm	3.00 mm	要問い合わせ