Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844492165, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38, Back rake angle: 11, Length picto milling: medium, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

技術仕様

EAN: 4049844492165
Type: N
Surface: AlCrN
Designation: Ratio end mill RF 100 Sharp
Helix angle: 38
Diameter range: 1.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 11
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: medium
Type of machine interface: HA
Number of cutting edges range (from/to): 4

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
6480 1.000	3.80 mm	28.00 mm	50.00 mm	4.00 mm	1.00 mm	要問い合わせ
6480 2.000	7.40 mm	36.00 mm	57.00 mm	6.00 mm	2.00 mm	要問い合わせ
6480 10.000	32.40 mm	40.00 mm	93.00 mm	10.00 mm	10.00 mm	要問い合わせ
6480 3.000	12.10 mm	36.00 mm	65.00 mm	6.00 mm	3.00 mm	要問い合わせ
6480 5.000	18.25 mm	36.00 mm	65.00 mm	6.00 mm	5.00 mm	要問い合わせ
6480 1.500	5.70 mm	28.00 mm	50.00 mm	4.00 mm	1.50 mm	要問い合わせ
6480 14.000	36.96 mm	45.00 mm	100.00 mm	14.00 mm	14.00 mm	要問い合わせ
6480 20.000	53.00 mm	50.00 mm	126.00 mm	20.00 mm	20.00 mm	要問い合わせ
6480 2.500	9.25 mm	36.00 mm	57.00 mm	6.00 mm	2.50 mm	要問い合わせ
6480 6.000	22.90 mm	36.00 mm	75.00 mm	6.00 mm	6.00 mm	要問い合わせ
6480 12.000	35.68 mm	45.00 mm	100.00 mm	12.00 mm	12.00 mm	要問い合わせ
6480 4.000	16.60 mm	36.00 mm	65.00 mm	6.00 mm	4.00 mm	要問い合わせ
6480 16.000	48.24 mm	48.00 mm	123.00 mm	16.00 mm	16.00 mm	要問い合わせ
6480 8.000	26.20 mm	36.00 mm	80.00 mm	8.00 mm	8.00 mm	要問い合わせ