Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.175 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093732420, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Feed direction: with drilling

技術仕様

EAN: 4031093732420
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 3.175 mm – 31.750 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: long
Number of cutting edges range (from/to): 4

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
3114 19.050	50.38 mm	51.22 mm	101.60 mm	19.05 mm	19.05 mm	要問い合わせ
3114 4.760	19.33 mm	31.47 mm	50.80 mm	4.76 mm	4.76 mm	要問い合わせ
3114 6.350	23.45 mm	40.05 mm	63.50 mm	6.35 mm	6.35 mm	要問い合わせ
3114 25.400	54.51 mm	47.09 mm	101.60 mm	25.40 mm	25.40 mm	要問い合わせ
3114 7.940	25.82 mm	37.68 mm	63.50 mm	7.94 mm	7.94 mm	要問い合わせ
3114 9.520	31.88 mm	31.62 mm	63.50 mm	9.53 mm	9.53 mm	要問い合わせ
3114 11.110	32.95 mm	36.90 mm	69.85 mm	11.11 mm	11.11 mm	要問い合わせ
3114 3.170	11.72 mm	39.08 mm	50.80 mm	3.17 mm	3.17 mm	要問い合わせ
3114 31.750	84.14 mm	68.26 mm	152.40 mm	31.75 mm	31.75 mm	要問い合わせ
3114 12.700	34.01 mm	42.19 mm	76.20 mm	12.70 mm	12.70 mm	要問い合わせ
3114 15.870	42.32 mm	46.58 mm	88.90 mm	15.88 mm	15.88 mm	要問い合わせ