Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093717687, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 6-10, Type of machine interface: HA

技術仕様

EAN: 4031093717687
Type: N
Surface: bright
Designation: Multi-tooth end mill GH 100 U
Helix angle: 45
Diameter range: 3.000 mm – 25.000 mm
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 6-10

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
3311 4.000	12.60 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	要問い合わせ
3311 5.000	15.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	要問い合わせ
3311 8.000	22.20 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	要問い合わせ
3311 20.000	44.60 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	要問い合わせ
3311 6.000	15.40 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	要問い合わせ
3311 3.000	9.20 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	要問い合わせ
3311 18.001	43.94 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	要問い合わせ
3311 12.000	30.80 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	要問い合わせ
3311 18.000	37.94 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	要問い合わせ
3311 16.000	38.40 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	要問い合わせ
3311 14.000	31.60 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	要問い合わせ
3311 14.001	37.60 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	要問い合わせ
3311 10.000	26.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	要問い合わせ
3311 25.000	53.25 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	要問い合わせ