← カタログ
画像をホバーして拡大
4247
Ball nose hard profile cutter GF 300 B
Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844152625, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 30, Back rake angle: -7, Length picto milling: extra long, Number of cutting edges range (from/to): 4, Feed direction: with drilling
技術仕様
- EAN
- 4049844152625
- Type
- H
- Surface
- Signum
- Designation
- Ball nose hard profile cutter GF 300 B
- Helix angle
- 30
- Diameter range
- 2.000 mm – 12.000 mm
- Feed direction
- with drilling
- Back rake angle
- -7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- extra long
- Number of cutting edges range (from/to)
- 4
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 4247 10.000 | 18.00 mm | 50.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 4247 8.000 | 15.16 mm | 50.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ | |
| 4247 2.000 | 5.10 mm | 39.60 mm | 80.00 mm | 6.00 mm | 2.00 mm | 要問い合わせ | |
| 4247 3.000 | 6.65 mm | 40.40 mm | 80.00 mm | 6.00 mm | 3.00 mm | 要問い合わせ | |
| 4247 4.000 | 8.20 mm | 36.00 mm | 80.00 mm | 6.00 mm | 4.00 mm | 要問い合わせ | |
| 4247 5.000 | 10.25 mm | 36.00 mm | 100.00 mm | 6.00 mm | 5.00 mm | 要問い合わせ | |
| 4247 6.000 | 12.12 mm | 50.00 mm | 100.00 mm | 6.00 mm | 6.00 mm | 要問い合わせ | |
| 4247 12.000 | 22.00 mm | 50.00 mm | 120.00 mm | 12.00 mm | 12.00 mm | 要問い合わせ |