← カタログ
画像をホバーして拡大
6827
Finishing end mill G-Mold μ 65 F
Finishing end mill G-Mold μ 65 F. Designation: Finishing end mill G-Mold μ 65 F, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844503564, Cutting material: Solid carbide, Surface: Perrox, Type: H, Helix angle: 42, Back rake angle: -3, Length picto milling: long, Number of cutting edges range (from/to): 4-6, Type of machine interface: HA, Feed direction: lateral
技術仕様
- EAN
- 4049844503564
- Type
- H
- Surface
- Perrox
- Designation
- Finishing end mill G-Mold μ 65 F
- Helix angle
- 42
- Diameter range
- 3.000 mm – 20.000 mm
- Feed direction
- lateral
- Back rake angle
- -3
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4-6
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 6827 5.000 | 16.25 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | 要問い合わせ | |
| 6827 20.000 | 47.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | 要問い合わせ | |
| 6827 8.000 | 22.60 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ | |
| 6827 16.000 | 39.20 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | 要問い合わせ | |
| 6827 10.000 | 26.50 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 6827 12.000 | 31.40 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | 要問い合わせ | |
| 6827 6.000 | 16.90 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | 要問い合わせ | |
| 6827 4.000 | 13.60 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | 要問い合わせ | |
| 6827 3.000 | 9.95 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | 要問い合わせ |