← カタログ
画像をホバーして拡大
274
Stepped drill for centring according to DIN 332
Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 8.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093084291, Cutting material: HSS, Surface: steam tempered, Type: N, Standard: Company std., Point angle: 118, Tolerance class nominal diameter: h7, Cutting direction: Right-hand, Form: D
技術仕様
- EAN
- 4031093084291
- Form
- D
- Type
- N
- Surface
- steam tempered
- Standard
- Company std.
- Designation
- Stepped drill for centring according to DIN 332
- Point angle
- 118
- Diameter range
- 8.000 mm – 40.000 mm
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Tolerance class nominal diameter
- h7
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 274 14.000 | 41.00 mm | 47.00 mm | 88.00 mm | 14.00 mm | 14.00 mm | 要問い合わせ | |
| 274 20.000 | 59.00 mm | 46.00 mm | 105.00 mm | 20.00 mm | 20.00 mm | 要問い合わせ | |
| 274 8.000 | 23.00 mm | 40.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ | |
| 274 40.000 | 90.00 mm | 70.00 mm | 160.00 mm | 40.00 mm | 40.00 mm | 要問い合わせ | |
| 274 31.500 | 76.50 mm | 68.50 mm | 145.00 mm | 31.50 mm | 31.50 mm | 要問い合わせ | |
| 274 10.000 | 27.00 mm | 40.00 mm | 67.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 274 12.500 | 33.00 mm | 38.00 mm | 71.00 mm | 12.50 mm | 12.50 mm | 要問い合わせ | |
| 274 16.000 | 47.00 mm | 47.00 mm | 94.00 mm | 16.00 mm | 16.00 mm | 要問い合わせ | |
| 274 25.000 | 67.00 mm | 65.00 mm | 132.00 mm | 25.00 mm | 25.00 mm | 要問い合わせ |