← カタログ
画像をホバーして拡大
6763
Ratio end mill Superfinish RF 100 SF 90°
Ratio end mill Superfinish RF 100 SF 90°. Designation: Ratio end mill Superfinish RF 100 SF 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844154346, Cutting material: Solid carbide, Surface: nanoA, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: 3xD, Number of cutting edges range (from/to): 5, Type of machine interface: HA, Corner design: Schneidecke 90°
技術仕様
- EAN
- 4049844154346
- Type
- N
- Surface
- nanoA
- Designation
- Ratio end mill Superfinish RF 100 SF 90°
- Helix angle
- 45
- Corner design
- Schneidecke 90°
- Diameter range
- 4.000 mm – 20.000 mm
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- 3xD
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 5
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 6763 20.000 | 71.00 mm | 50.00 mm | 126.00 mm | 20.00 mm | 20.00 mm | 要問い合わせ | |
| 6763 12.000 | 43.00 mm | 45.00 mm | 93.00 mm | 12.00 mm | 12.00 mm | 要問い合わせ | |
| 6763 4.000 | 16.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 4.00 mm | 要問い合わせ | |
| 6763 16.000 | 57.00 mm | 48.00 mm | 108.00 mm | 16.00 mm | 16.00 mm | 要問い合わせ | |
| 6763 6.000 | 23.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | 要問い合わせ | |
| 6763 5.000 | 19.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 5.00 mm | 要問い合わせ | |
| 6763 10.000 | 36.00 mm | 40.00 mm | 80.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 6763 8.000 | 30.00 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ |