← カタログ
画像をホバーして拡大
3160
Ball nose slot drill (2-fluted)
Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4031093664325, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: medium, Number of cutting edges range (from/to): 2, Feed direction: with drilling
技術仕様
- EAN
- 4031093664325
- Type
- N
- Designation
- Ball nose slot drill (2-fluted)
- Helix angle
- 30
- Diameter range
- 3.175 mm – 19.050 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Number of cutting edges range (from/to)
- 2
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 3160 3.170 | 17.00 mm | 33.80 mm | 50.80 mm | 3.17 mm | 3.17 mm | 要問い合わせ | |
| 3160 15.870 | 73.00 mm | 54.00 mm | 127.00 mm | 15.88 mm | 15.88 mm | 要問い合わせ | |
| 3160 6.350 | 36.50 mm | 39.70 mm | 76.20 mm | 6.35 mm | 6.35 mm | 要問い合わせ | |
| 3160 19.050 | 76.00 mm | 51.00 mm | 127.00 mm | 19.05 mm | 19.05 mm | 要問い合わせ | |
| 3160 12.700 | 65.00 mm | 49.30 mm | 114.30 mm | 12.70 mm | 12.70 mm | 要問い合わせ | |
| 3160 9.520 | 38.50 mm | 37.70 mm | 76.20 mm | 9.53 mm | 9.53 mm | 要問い合わせ | |
| 3160 4.760 | 24.50 mm | 39.00 mm | 63.50 mm | 4.76 mm | 4.76 mm | 要問い合わせ | |
| 3160 7.940 | 36.50 mm | 39.70 mm | 76.20 mm | 7.94 mm | 7.94 mm | 要問い合わせ | |
| 3160 11.110 | 63.00 mm | 51.30 mm | 114.30 mm | 11.11 mm | 11.11 mm | 要問い合わせ |