Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844144408, Cutting material: Solid carbide, Surface: Signum, Type: N, Helix angle: 36/38/37, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA/~HB, Feed direction: with drilling

技術仕様

EAN: 4049844144408
Type: N
Surface: Signum
Designation: Ratio end mill RF 100 Diver
Helix angle: 36/38/37
Diameter range: 3.175 mm – 25.400 mm
Feed direction: with drilling
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: ~HA/~HB
Number of cutting edges range (from/to): 4

寸法および注文コード

注文コード	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	在庫状況
6757 25.400	53.75 mm	58.00 mm	127.00 mm	25.40 mm	25.40 mm	要問い合わせ
6757 12.700	34.29 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	要問い合わせ
6757 7.940	24.61 mm	38.00 mm	63.50 mm	7.94 mm	7.94 mm	要問い合わせ
6757 15.870	43.11 mm	48.40 mm	88.90 mm	15.88 mm	15.88 mm	要問い合わせ
6757 11.110	30.00 mm	38.65 mm	69.85 mm	11.11 mm	11.11 mm	要問い合わせ
6757 3.170	8.57 mm	28.75 mm	38.10 mm	3.17 mm	3.17 mm	要問い合わせ
6757 9.520	28.87 mm	33.50 mm	63.50 mm	9.53 mm	9.53 mm	要問い合わせ
6757 4.760	12.83 mm	36.30 mm	50.80 mm	4.76 mm	4.76 mm	要問い合わせ
6757 19.050	51.34 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	要問い合わせ
6757 6.350	17.14 mm	44.30 mm	63.50 mm	6.35 mm	6.35 mm	要問い合わせ