← カタログ
画像をホバーして拡大
6710
Ratio end mill Superfinish RF 100 SF
Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844072817, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 5, Type of machine interface: HB, Feed direction: with drilling
技術仕様
- EAN
- 4049844072817
- Type
- N
- Designation
- Ratio end mill Superfinish RF 100 SF
- Helix angle
- 45
- Diameter range
- 4.000 mm – 25.000 mm
- Feed direction
- with drilling
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 5
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 6710 5.000 | 17.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | 要問い合わせ | |
| 6710 12.000 | 33.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | 要問い合わせ | |
| 6710 20.000 | 49.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | 要問い合わせ | |
| 6710 8.000 | 25.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ | |
| 6710 16.000 | 41.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | 要問い合わせ | |
| 6710 10.000 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 6710 4.000 | 15.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | 要問い合わせ | |
| 6710 6.000 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | 要問い合わせ | |
| 6710 25.000 | 58.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | 要問い合わせ |