← カタログ
画像をホバーして拡大
19956
End mill (4-fluted)
End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844288133, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: Cyl
技術仕様
- EAN
- 4049844288133
- Type
- N
- Designation
- End mill (4-fluted)
- Helix angle
- 30
- Diameter range
- 1.590 mm – 25.400 mm
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- Cyl
- Number of cutting edges range (from/to)
- 4
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 19956 15.870 | 46.60 mm | 42.30 mm | 88.90 mm | 15.88 mm | 15.88 mm | 要問い合わせ | |
| 19956 1.590 | 6.39 mm | — | 38.10 mm | 3.17 mm | 1.59 mm | 要問い合わせ | |
| 19956 7.940 | 28.44 mm | 35.06 mm | 63.50 mm | 7.94 mm | 7.94 mm | 要問い合わせ | |
| 19956 3.170 | 12.68 mm | 25.43 mm | 38.10 mm | 3.17 mm | 3.17 mm | 要問い合わせ | |
| 19956 25.400 | 60.35 mm | 41.25 mm | 101.60 mm | 25.40 mm | 25.40 mm | 要問い合わせ | |
| 19956 12.700 | 37.18 mm | 39.02 mm | 76.20 mm | 12.70 mm | 12.70 mm | 要問い合わせ | |
| 19956 11.110 | 35.72 mm | 34.13 mm | 69.85 mm | 11.11 mm | 11.11 mm | 要問い合わせ | |
| 19956 4.760 | 20.76 mm | 30.04 mm | 50.80 mm | 4.76 mm | 4.76 mm | 要問い合わせ | |
| 19956 6.350 | 25.35 mm | 38.15 mm | 63.50 mm | 6.35 mm | 6.35 mm | 要問い合わせ | |
| 19956 19.050 | 55.53 mm | 46.07 mm | 101.60 mm | 19.05 mm | 19.05 mm | 要問い合わせ |