← カタログ
画像をホバーして拡大
6767
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4049844155596, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 38, Back rake angle: 4, Length picto milling: 4xD, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: lateral
技術仕様
- EAN
- 4049844155596
- Type
- N
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 38
- Diameter range
- 6.000 mm – 25.000 mm
- Feed direction
- lateral
- Product family
- RF 100 U
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
- Length picto milling
- 4xD
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 6767 20.000 | 92.00 mm | 50.00 mm | 150.00 mm | 20.00 mm | 20.00 mm | 要問い合わせ | |
| 6767 8.000 | 37.00 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ | |
| 6767 12.000 | 56.00 mm | 45.00 mm | 100.00 mm | 12.00 mm | 12.00 mm | 要問い合わせ | |
| 6767 10.000 | 46.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 6767 6.000 | 29.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | 要問い合わせ | |
| 6767 16.000 | 74.00 mm | 48.00 mm | 125.00 mm | 16.00 mm | 16.00 mm | 要問い合わせ | |
| 6767 25.000 | 115.00 mm | 56.00 mm | 175.00 mm | 25.00 mm | 25.00 mm | 要問い合わせ |