← カタログ
画像をホバーして拡大
6462
Ratio end mill RF 100 Sharp extra short
Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4069941477704, Cutting material: Solid carbide, Surface: AlCrN, Helix angle: 38, Back rake angle: 12, Number of cutting edges range (from/to): 4
技術仕様
- EAN
- 4069941477704
- Surface
- AlCrN
- Designation
- Ratio end mill RF 100 Sharp extra short
- Helix angle
- 38
- Diameter range
- 1.590 mm – 19.050 mm
- Back rake angle
- 12
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Number of cutting edges range (from/to)
- 4
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 6462 4.760 | 7.86 mm | 35.00 mm | 50.80 mm | 6.35 mm | 4.76 mm | 要問い合わせ | |
| 6462 12.700 | 20.83 mm | 45.20 mm | 76.20 mm | 12.70 mm | 12.70 mm | 要問い合わせ | |
| 6462 11.110 | 18.23 mm | 37.20 mm | 63.50 mm | 11.11 mm | 11.11 mm | 要問い合わせ | |
| 6462 9.520 | 15.62 mm | 36.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | 要問い合わせ | |
| 6462 15.870 | 26.04 mm | 48.40 mm | 88.90 mm | 15.88 mm | 15.88 mm | 要問い合わせ | |
| 6462 3.170 | 5.40 mm | 28.00 mm | 38.10 mm | 4.76 mm | 3.17 mm | 要問い合わせ | |
| 6462 1.590 | 2.70 mm | 24.00 mm | 38.10 mm | 3.17 mm | 1.59 mm | 要問い合わせ | |
| 6462 6.350 | 10.48 mm | 35.00 mm | 50.80 mm | 6.35 mm | 6.35 mm | 要問い合わせ | |
| 6462 19.050 | 30.67 mm | 51.60 mm | 88.90 mm | 19.05 mm | 19.05 mm | 要問い合わせ | |
| 6462 7.940 | 13.02 mm | 36.00 mm | 50.80 mm | 7.94 mm | 7.94 mm | 要問い合わせ |