← カタログ
画像をホバーして拡大
3598
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844018341, Cutting material: Solid carbide, Product family: RF 100 U, Type: H, Helix angle: 30/32, Back rake angle: 4, Length picto milling: extra long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA
技術仕様
- EAN
- 4049844018341
- Type
- H
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 30/32
- Diameter range
- 6.000 mm – 20.000 mm
- Product family
- RF 100 U
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- extra long
- Type of machine interface
- ~HA
- Number of cutting edges range (from/to)
- 4
寸法および注文コード
| 注文コード | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 在庫状況 | 価格のお問い合わせ |
|---|---|---|---|---|---|---|---|
| 3598 10.000 | 28.00 mm | 50.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | 要問い合わせ | |
| 3598 20.000 | 50.00 mm | 70.00 mm | 150.00 mm | 20.00 mm | 20.00 mm | 要問い合わせ | |
| 3598 16.000 | 42.00 mm | 70.00 mm | 150.00 mm | 16.00 mm | 16.00 mm | 要問い合わせ | |
| 3598 8.000 | 24.00 mm | 50.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | 要問い合わせ | |
| 3598 6.000 | 18.00 mm | 40.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | 要問い合わせ | |
| 3598 12.000 | 34.00 mm | 90.00 mm | 150.00 mm | 12.00 mm | 12.00 mm | 要問い合わせ |