Önüm katalogy

Her bir gural üçin tehniki maglumatlar, ölçegler we ammar ýagdaýy.

4246 / 4246

Torque wrench

Torque wrench. Designation: Torque wrench, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

1 önüm

4988

Torque wrench

Torque wrench. Designation: Torque wrench, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

1 önüm

4987

Torque wrench

Torque wrench. Designation: Torque wrench, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

1 önüm

4989

Torque wrench

Torque wrench. Designation: Torque wrench, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

2 önüm

4624

Assembly tool

Assembly tool. Designation: Assembly tool, Internal diameter: 21.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val"

6 önüm

4910

Socket

Socket. Designation: Socket, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","v

6 önüm

4911

Socket

Socket. Designation: Socket, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":

6 önüm

4986

Assembly tool

Assembly tool. Designation: Assembly tool, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

6 önüm

25911

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

1 önüm

25931

Torx screwdriver

Torx screwdriver. Designation: Torx screwdriver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

3 önüm

4868

Socket

Socket. Designation: Socket, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","v

5 önüm

1086

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

5 önüm

5674

82° Countersink SpyroTec

82° Countersink SpyroTec. Designation: 82° Countersink SpyroTec, Diameter range: 6.350 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 önüm

5675

82° Countersink SpyroTec

82° Countersink SpyroTec. Designation: 82° Countersink SpyroTec, Diameter range: 6.350 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 önüm

294

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.190 mm – 7.940 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

7 önüm

292

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.190 mm – 7.940 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

7 önüm

594

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.190 mm – 7.940 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

8 önüm

595

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.190 mm – 6.350 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

8 önüm

956

Hand tap for BSW-threads

Hand tap for BSW-threads. Designation: Hand tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

20 önüm

955

Hand tap for BSW-threads

Hand tap for BSW-threads. Designation: Hand tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

22 önüm

957

Hand tap for BSW-threads

Hand tap for BSW-threads. Designation: Hand tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

16 önüm

1585

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 önüm

1986

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

6 önüm

1974

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

3 önüm

1973

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

3 önüm

1975

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

1 önüm

1583

Fluteless machine tap for UNC-threads

2 önüm

2274

Fluteless machine tap for UNC-threads

5 önüm

2845

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

7 önüm

2841

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

Machine tap for UN-threads. Designation: Machine tap for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 önüm

940

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 önüm

933

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

5 önüm

934

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 önüm

881

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

7 önüm

4719

Shrink fit extension

Shrink fit extension. Designation: Shrink fit extension, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

51 önüm

1053

Chamfer collar

Chamfer collar. Designation: Chamfer collar, Internal diameter: 15.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","va

6 önüm

4401

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M5 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 önüm

4204

PCD cartridge

PCD cartridge. Designation: PCD cartridge, Diameter range: 30.000 mm – 30.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

3 önüm

5699

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M5 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 önüm

3191

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 15.875 mm, TABLE_INFO_PASSON: [{"at

7 önüm

3158

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

9 önüm

3101

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"at

6 önüm

3157

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

33 önüm

3160

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

9 önüm

3159

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

33 önüm

6841

Ball nose hard profile cutter GF 300 B

2 önüm

1055

Chamfer collar

Chamfer collar. Designation: Chamfer collar, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

2 önüm

7726

Indexable insert

Indexable insert. Designation: Indexable insert, Diameter range: 1.000 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

2 önüm

1947

Round indexable insert

Round indexable insert. Designation: Round indexable insert, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

4 önüm

1437

Woodruff keys

Woodruff keys. Designation: Woodruff keys, Diameter range: 13.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

6 önüm

25172

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

1 önüm

25173

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

1 önüm

25181

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 önüm

25115

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

13 önüm

25221

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

3 önüm

25189

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 önüm

25205

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 önüm

25220

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

3 önüm

25196

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 önüm

25165

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 önüm

25188

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 önüm

25213

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 önüm

25157

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 önüm

25197

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 önüm

25180

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 önüm

25114

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

13 önüm

25236

Cutting insert for Torx

Cutting insert for Torx. Designation: Cutting insert for Torx, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

6 önüm

25132

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 önüm

25140

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 önüm

25074

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

27 önüm

25149

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 önüm

25133

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 önüm

25148

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 önüm

25125

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 önüm

25141

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 önüm

25106

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

22 önüm

25067

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 önüm

25156

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 önüm

25082

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

30 önüm

25212

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 önüm

25500

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

25164

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 önüm

25091

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

13 önüm

25228

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

5 önüm

25051

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 önüm

25124

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 önüm

25107

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

22 önüm

25609

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

1 önüm

25050

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 önüm

25059

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

51 önüm

25907

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

25232

Cutting insert for internal square

Cutting insert for internal square. Designation: Cutting insert for internal square, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

5 önüm

25812

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

4 önüm

25066

Cutting insert for boring out and profiling

28 önüm

25756

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 önüm

25820

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

4 önüm

25833

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

25780

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 önüm

25773

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 önüm

25889

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

25508

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

25797

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 önüm

25764

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 önüm

25902

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

2 önüm

25864

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

28 önüm

25840

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

25856

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

7 önüm

25709

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 önüm

25749

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

25716

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

36 önüm

25873

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

25748

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

25517

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 önüm

25757

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 önüm

25841

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

25058

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

51 önüm

25880

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 önüm

25509

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

25832

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

25700

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 önüm

25740

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

36 önüm

25865

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

28 önüm

25708

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 önüm

25717

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

36 önüm

25516

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 önüm

25701

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 önüm

25848

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

25872

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

25741

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

36 önüm

25888

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 önüm

4072

Chamfer collar

Chamfer collar. Designation: Chamfer collar, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

2 önüm

4664

MAS/BT hydro expansion chuck

MAS/BT hydro expansion chuck. Designation: MAS/BT hydro expansion chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

1 önüm

4327

Synchro tapping chuck HSK-A

Synchro tapping chuck HSK-A. Designation: Synchro tapping chuck HSK-A, Diameter range: 4.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

5 önüm

4604

MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A

4 önüm

4939

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 önüm

4663

SK hydro expansion chuck

SK hydro expansion chuck. Designation: SK hydro expansion chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

1 önüm

4350

Extension HSK-A / HSK-C

Extension HSK-A / HSK-C. Designation: Extension HSK-A / HSK-C, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

9 önüm

4619

SK hydro expansion chuck

SK hydro expansion chuck. Designation: SK hydro expansion chuck, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

3 önüm

4298

MQL synchro tapping chuck HSK-A for manual tool change

MQL synchro tapping chuck HSK-A for manual tool change. Designation: MQL synchro tapping chuck HSK-A for manual tool change, Diameter range: 4.5 - 20.0, TA

2 önüm

4343

HSK-A adaptor for tapping chucks

HSK-A adaptor for tapping chucks. Designation: HSK-A adaptor for tapping chucks, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

4 önüm

4949

Coolant supply set for conventional cooling

Coolant supply set for conventional cooling. Designation: Coolant supply set for conventional cooling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

4241

Threaded pin for hydro clamping chucks

Threaded pin for hydro clamping chucks. Designation: Threaded pin for hydro clamping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

6 önüm

4367

Hydraulic chuck

Hydraulic chuck. Designation: Hydraulic chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","

1 önüm

4328

Quick change tapping chuck HSK-A

Quick change tapping chuck HSK-A. Designation: Quick change tapping chuck HSK-A, Diameter range: M3.5 - M20, Internal diameter: 19.00 mm, TABLE_INFO_PASSON

2 önüm

4946

Tool setting fixture

Tool setting fixture. Designation: Tool setting fixture, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

4 önüm

4602

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for automatic tool change cycle

4 önüm

4351

Extension HSK-C

Extension HSK-C. Designation: Extension HSK-C, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

5 önüm

4662

HSK-A hydro expansion chuck

HSK-A hydro expansion chuck. Designation: HSK-A hydro expansion chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

1 önüm

4244

HPC chuck MAS/BT

HPC chuck MAS/BT. Designation: HPC chuck MAS/BT, Diameter range: 16.0 - 32.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

9 önüm

4615

Adapter for M contour clamping sets

Adapter for M contour clamping sets. Designation: Adapter for M contour clamping sets, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

7 önüm

4765

CAT shrink fit chuck

CAT shrink fit chuck. Designation: CAT shrink fit chuck, Internal diameter: 12.70 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

9 önüm

4790

MAS/BT DC shrink fit chuck with axial plane

MAS/BT DC shrink fit chuck with axial plane. Designation: MAS/BT DC shrink fit chuck with axial plane, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"a

11 önüm

4300

HPC chuck HSK-A

HPC chuck HSK-A. Designation: HPC chuck HSK-A, Diameter range: 3.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

6 önüm

4603

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for automatic tool change cycle

4 önüm

4596

HSK-A hydro expansion chuck slim design 3°

HSK-A hydro expansion chuck slim design 3°. Designation: HSK-A hydro expansion chuck slim design 3°, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr

16 önüm

4296

HSK-A hydro expansion chuck with radial length adjustment

HSK-A hydro expansion chuck with radial length adjustment. Designation: HSK-A hydro expansion chuck with radial length adjustment, Internal diameter: 12.00

38 önüm

4513

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 3.60 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

10 önüm

4206

Quick change tapping chuck adaptor

Quick change tapping chuck adaptor. Designation: Quick change tapping chuck adaptor, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

21 önüm

4231

ISO taper milling arbor

ISO taper milling arbor. Designation: ISO taper milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

9 önüm

4666

Hydraulic chucks set

Hydraulic chucks set. Designation: Hydraulic chucks set, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

4 önüm

4958

4-point clamping set

4-point clamping set. Designation: 4-point clamping set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

6 önüm

4243

HPC chuck CAT

HPC chuck CAT. Designation: HPC chuck CAT, Diameter range: 16.0 - 32.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val"

4 önüm

4557

Component part for clamping set

Component part for clamping set. Designation: Component part for clamping set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

7 önüm

4741

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 20.

82 önüm

4729

ISO taper shrink fit chucks

ISO taper shrink fit chucks. Designation: ISO taper shrink fit chucks, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

18 önüm

4788

ISO taper shrink fit chuck, slim design 3°

ISO taper shrink fit chuck, slim design 3°. Designation: ISO taper shrink fit chuck, slim design 3°, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"att

33 önüm

4213

SK hydro expansion chuck with increased clamping force

SK hydro expansion chuck with increased clamping force. Designation: SK hydro expansion chuck with increased clamping force, Internal diameter: 10.00 mm, T

16 önüm

4764

Shrink fit chuck

Shrink fit chuck. Designation: Shrink fit chuck, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

34 önüm

4800

ISO taper milling arbor

ISO taper milling arbor. Designation: ISO taper milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

36 önüm

4787

HSK-A shrink fit chuck, slim design 3°

HSK-A shrink fit chuck, slim design 3°. Designation: HSK-A shrink fit chuck, slim design 3°, Internal diameter: 5.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

33 önüm

4618

HSK-A hydro expansion chuck

HSK-A hydro expansion chuck. Designation: HSK-A hydro expansion chuck, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

15 önüm

4622

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Diameter range: 6 - 16, Internal diameter: 1.60 mm, TABLE_INFO_PASSON: [{"attr":"P

83 önüm

4728

MAS/BT shrink fit chuck

MAS/BT shrink fit chuck. Designation: MAS/BT shrink fit chuck, Internal diameter: 32.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-

10 önüm

4295

HSK-C hydro expansion chuck with radial length adjustment

HSK-C hydro expansion chuck with radial length adjustment. Designation: HSK-C hydro expansion chuck with radial length adjustment, Internal diameter: 32.00

22 önüm

4727

ISO taper shrink fit chucks

ISO taper shrink fit chucks. Designation: ISO taper shrink fit chucks, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

10 önüm

4726

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

20 önüm

4735

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

82 önüm

4739

MAS/BT shrink fit chuck

MAS/BT shrink fit chuck. Designation: MAS/BT shrink fit chuck, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

52 önüm

4620

MAS/BT hydro expansion chuck

MAS/BT hydro expansion chuck. Designation: MAS/BT hydro expansion chuck, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 önüm

4554

Clamping set PowerClamp

Clamping set PowerClamp. Designation: Clamping set PowerClamp, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

7 önüm

4209

MQL hydro expansion chuck for manual tool change cylce HSK-A

MQL hydro expansion chuck for manual tool change cylce HSK-A. Designation: MQL hydro expansion chuck for manual tool change cylce HSK-A, Internal diameter:

46 önüm

4613

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 18.00 mm, TABLE_INFO_

200 önüm

4222

CAT milling arbor

CAT milling arbor. Designation: CAT milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

10 önüm

4940

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 önüm

4301

HPC chuck SK

HPC chuck SK. Designation: HPC chuck SK, Diameter range: 3.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

6 önüm

4789

HSK-E shrink fit chuck, slim design 3°

HSK-E shrink fit chuck, slim design 3°. Designation: HSK-E shrink fit chuck, slim design 3°, Internal diameter: 5.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

23 önüm

4930

MQL clamping set

MQL clamping set. Designation: MQL clamping set, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

9 önüm

4915

Torque wrench

Torque wrench. Designation: Torque wrench, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

10 önüm

4341

MQL synchro tapping chuck HSK-A for automatic tool change cycle

MQL synchro tapping chuck HSK-A for automatic tool change cycle. Designation: MQL synchro tapping chuck HSK-A for automatic tool change cycle, Diameter ran

4 önüm

4755

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

40 önüm

4330

MQL synchro tapping chuck HSK-A for automatic tool change cycle

MQL synchro tapping chuck HSK-A for automatic tool change cycle. Designation: MQL synchro tapping chuck HSK-A for automatic tool change cycle, Diameter ran

5 önüm

4758

HSK-C shrink fit chuck

HSK-C shrink fit chuck. Designation: HSK-C shrink fit chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

48 önüm

4299

Hydro expansion chuck with increased clamping force

Hydro expansion chuck with increased clamping force. Designation: Hydro expansion chuck with increased clamping force, Internal diameter: 14.00 mm, TABLE_I

82 önüm

4612

MQL hydro expansion chuck for automatic tool change cycle HSK-A

MQL hydro expansion chuck for automatic tool change cycle HSK-A. Designation: MQL hydro expansion chuck for automatic tool change cycle HSK-A, Internal dia

119 önüm

4738

ISO taper shrink fit chucks

ISO taper shrink fit chucks. Designation: ISO taper shrink fit chucks, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

79 önüm

4267

HSK-C hydro expansion chuck with increased clamping force

HSK-C hydro expansion chuck with increased clamping force. Designation: HSK-C hydro expansion chuck with increased clamping force, Internal diameter: 10.00

26 önüm

4511

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 önüm

4361

Shell milling arbor

Shell milling arbor. Designation: Shell milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

22 önüm

4736

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

132 önüm

4737

HSK-E shrink fit chuck

HSK-E shrink fit chuck. Designation: HSK-E shrink fit chuck, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

37 önüm

4923

Feather key

Feather key. Designation: Feather key, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"at

6 önüm

4611

MQL hydro expansion chuck for manual tool change cylce HSK-A

MQL hydro expansion chuck for manual tool change cylce HSK-A. Designation: MQL hydro expansion chuck for manual tool change cylce HSK-A, Internal diameter:

119 önüm

4924

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

112 önüm

4508

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 önüm

4623

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Diameter range: 20, Internal diameter: 3.40 mm, TABLE_INFO_PASSON: [{"attr":"P","v

83 önüm

4210

MQL hydro expansion chuck for automatic tool change cycle HSK-A

MQL hydro expansion chuck for automatic tool change cycle HSK-A. Designation: MQL hydro expansion chuck for automatic tool change cycle HSK-A, Internal dia

46 önüm

4221

MAS/BT hydro expansion chuck with increased clamping force

MAS/BT hydro expansion chuck with increased clamping force. Designation: MAS/BT hydro expansion chuck with increased clamping force, Internal diameter: 20.

25 önüm

4549

Extension HSK-A / HSK-C

Extension HSK-A / HSK-C. Designation: Extension HSK-A / HSK-C, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

10 önüm

4216

Hydraulic chuck

Hydraulic chuck. Designation: Hydraulic chuck, Internal diameter: 6.35 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

34 önüm

4614

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 16.

200 önüm

4966

Torque wrench set

Torque wrench set. Designation: Torque wrench set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

2 önüm

4972

Mounting adapter

Mounting adapter. Designation: Mounting adapter, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

3 önüm

4990

Tool setting fixture

Tool setting fixture. Designation: Tool setting fixture, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

8 önüm

4983

HSK-A blanks

HSK-A blanks. Designation: HSK-A blanks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

7 önüm

4982

HSK-C blanks

HSK-C blanks. Designation: HSK-C blanks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

9 önüm

4979

Coolant supply set for conventional cooling

Coolant supply set for conventional cooling. Designation: Coolant supply set for conventional cooling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

6021

Clamping strip for tool heads

Clamping strip for tool heads. Designation: Clamping strip for tool heads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

14 önüm

6155

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

20 önüm

6126

Indexable insert base

Indexable insert base. Designation: Indexable insert base, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

12 önüm

6522

Clamping claw

Clamping claw. Designation: Clamping claw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

8 önüm

4962

Company std.

Company std.. TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr

6 önüm

3168

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

3177

Slot drill GA 200 A (3-fluted)

Slot drill GA 200 A (3-fluted). Designation: Slot drill GA 200 A (3-fluted), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

6 önüm

3175

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 6.350 mm – 15.875 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

4 önüm

3086

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.590 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

8 önüm

3171

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 önüm

3192

Hard profile cutter with Torus grind GF 300 T

Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 4.763 mm – 15.875 mm, TABLE_INFO

6 önüm

3151

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 önüm

3149

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 önüm

19955

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 önüm

3088

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

3174

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 önüm

19954

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

19953

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 önüm

3173

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 önüm

3170

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

3172

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 önüm

3087

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 önüm

3148

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 önüm

3147

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 önüm

3092

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 önüm

19958

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 önüm

3169

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 önüm

19952

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

3146

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 önüm

4240

MAS/BT NC drilling chuck with internal cooling

MAS/BT NC drilling chuck with internal cooling. Designation: MAS/BT NC drilling chuck with internal cooling, Diameter range: 1.0 - 16, TABLE_INFO_PASSON: [

3 önüm

4087

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

2 önüm

4233

Whistle Notch side lock holder MAS/BT

Whistle Notch side lock holder MAS/BT. Designation: Whistle Notch side lock holder MAS/BT, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val

20 önüm

4346

HSK-A NC drilling chuck with internal cooling

HSK-A NC drilling chuck with internal cooling. Designation: HSK-A NC drilling chuck with internal cooling, Diameter range: 1.0 - 16, TABLE_INFO_PASSON: [{"

4 önüm

4242

ISO taper NC drilling chuck with internal cooling

ISO taper NC drilling chuck with internal cooling. Designation: ISO taper NC drilling chuck with internal cooling, Diameter range: 1.0 - 16, TABLE_INFO_PAS

2 önüm

4317

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

31 önüm

4329

Weldon side lock holders HSK-A

Weldon side lock holders HSK-A. Designation: Weldon side lock holders HSK-A, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

58 önüm

4232

Weldon side lock holders HSK-A

Weldon side lock holders HSK-A. Designation: Weldon side lock holders HSK-A, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

58 önüm

4322

Whistle Notch side lock holders ISO taper

Whistle Notch side lock holders ISO taper. Designation: Whistle Notch side lock holders ISO taper, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr"

20 önüm

4334

Whistle Notch side lock holders HSK-A

Whistle Notch side lock holders HSK-A. Designation: Whistle Notch side lock holders HSK-A, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","va

48 önüm

4234

Weldon side lock holders MAS/BT

Weldon side lock holders MAS/BT. Designation: Weldon side lock holders MAS/BT, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

29 önüm

4497

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

80 önüm

4333

Whistle Notch side lock holders HSK-C

Whistle Notch side lock holders HSK-C. Designation: Whistle Notch side lock holders HSK-C, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","va

29 önüm

5496

PCD slot drill (3-fluted)

PCD slot drill (3-fluted). Designation: PCD slot drill (3-fluted), Diameter range: 14.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

8 önüm

5493

PCD slot drill (2-fluted)

PCD slot drill (2-fluted). Designation: PCD slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

19 önüm

4824

Weldon side lock holders ISO taper

Weldon side lock holders ISO taper. Designation: Weldon side lock holders ISO taper, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

88 önüm

4853

Whistle Notch side lock holders ISO taper

Whistle Notch side lock holders ISO taper. Designation: Whistle Notch side lock holders ISO taper, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr"

30 önüm

6843

Hard profile cutter GF 300 T

Hard profile cutter GF 300 T. Designation: Hard profile cutter GF 300 T, Diameter range: 4.763 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

10 önüm

4745

HSK holder

HSK holder. Designation: HSK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

6 önüm

4761

HSK holder

HSK holder. Designation: HSK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

6 önüm

4763

Swivel compartments

Swivel compartments. Designation: Swivel compartments, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

1 önüm

1054

Chamfer collar

Chamfer collar. Designation: Chamfer collar, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

Mounting key for parting off blade. Designation: Mounting key for parting off blade, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

1 önüm

25922

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

1 önüm

25904

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

2 önüm

25900

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

1 önüm

3003

Milling arbor

Milling arbor. Designation: Milling arbor, Diameter range: 63.000 mm – 250.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},

2 önüm

28901

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

4 önüm

3002

Milling arbor

Milling arbor. Designation: Milling arbor, Diameter range: 100.000 mm – 250.000 mm, Internal diameter: 40.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

5 önüm

4099

Extraction key for reduction bushes

Extraction key for reduction bushes. Designation: Extraction key for reduction bushes, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 önüm

4060

Threaded pin

Threaded pin. Designation: Threaded pin, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

2 önüm

4573

Retaining nut

Retaining nut. Designation: Retaining nut, Diameter range: 1.0 - 7.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"

1 önüm

4744

SK holder

SK holder. Designation: SK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

3 önüm

4759

Control unit SpeedCooler

Control unit SpeedCooler. Designation: Control unit SpeedCooler, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"}

2 önüm

4747

SpeedCooler cooling system

SpeedCooler cooling system. Designation: SpeedCooler cooling system, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

3 önüm

4762

SK holder

SK holder. Designation: SK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

3 önüm

4926

Pull stud SK

Pull stud SK. Designation: Pull stud SK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

3 önüm

4767

Coolant protection

Coolant protection. Designation: Coolant protection, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","

1 önüm

4927

Pull stud BT

Pull stud BT. Designation: Pull stud BT, Internal diameter: 8.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

7 önüm

4947

HSK cleaning cap

HSK cleaning cap. Designation: HSK cleaning cap, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

5 önüm

4925

Pull stud SK

Pull stud SK. Designation: Pull stud SK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

3 önüm

4774

Holder carriers

Holder carriers. Designation: Holder carriers, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

6 önüm

4916

Hexagon insert

Hexagon insert. Designation: Hexagon insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

16 önüm

4919

MQL adjusting screw

MQL adjusting screw. Designation: MQL adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

15 önüm

4913

Clamping key

Clamping key. Designation: Clamping key, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

15 önüm

4917

Torx socket set

Torx socket set. Designation: Torx socket set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

11 önüm

4928

Pull stud BT

Pull stud BT. Designation: Pull stud BT, Internal diameter: 2.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

8 önüm

4912

Hexagon key

Hexagon key. Designation: Hexagon key, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"at

25 önüm

4937

MQL HSK-A adjusting screw

MQL HSK-A adjusting screw. Designation: MQL HSK-A adjusting screw, Diameter range: 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

34 önüm

4555

Threaded spindle

Threaded spindle. Designation: Threaded spindle, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

7 önüm

4932

Ejector for MQL clamping sets

Ejector for MQL clamping sets. Designation: Ejector for MQL clamping sets, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

12 önüm

4773

Cooling adapter

Cooling adapter. Designation: Cooling adapter, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

5 önüm

4909

Socket

Socket. Designation: Socket, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","v

7 önüm

4306

Retaining nut

Retaining nut. Designation: Retaining nut, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

32 önüm

4960

Torx Plus interchangeable blade

Torx Plus interchangeable blade. Designation: Torx Plus interchangeable blade, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

5 önüm

4994

Roller spanner for precision collet holders

Roller spanner for precision collet holders. Designation: Roller spanner for precision collet holders, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"a

1 önüm

4995

Roller spanner insert for torque wrench

Roller spanner insert for torque wrench. Designation: Roller spanner insert for torque wrench, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

1 önüm

4992

Taper insert

Taper insert. Designation: Taper insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

7 önüm

4963

Assembly tool

Assembly tool. Designation: Assembly tool, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

7 önüm

6009

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 3.3 - 11.8, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

1 önüm

6153

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 31.500 mm – 31.500 mm, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

8 önüm

6154

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 50.000 mm – 50.000 mm, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

4 önüm

6152

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 20.000 mm – 20.000 mm, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

5 önüm

6151

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 10.000 mm – 10.000 mm, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

3 önüm

25909

Locking screw for parting off blade

Locking screw for parting off blade. Designation: Locking screw for parting off blade, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 önüm

4102

DIN 6798

Round shank holder, clamping screw above, four clamping surfaces. Designation: Round shank holder, clamping screw above, four clamping surfaces, TABLE_INFO

8 önüm

3467

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

13 önüm

3466

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

21 önüm

3703

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

21 önüm

3704

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 önüm

6108

Clamping nut

Clamping nut. Designation: Clamping nut, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

2 önüm

6107

Clamping screw

Clamping screw. Designation: Clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

2 önüm

1257

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

1 önüm

1003

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 önüm

1085

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

5 önüm

1188

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 önüm

1072

Clamping screw for chamfer collars

Clamping screw for chamfer collars. Designation: Clamping screw for chamfer collars, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

3 önüm

1271

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

1067

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 önüm

1082

Tap with coolant ducts for UNF threads

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

10 önüm

1064

Machine tap for UNJF-threads

Machine tap for UNJF-threads. Designation: Machine tap for UNJF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 önüm

1272

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

1194

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

6 önüm

1071

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

6 önüm

1256

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

5 önüm

1139

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

4 önüm

1267

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

4 önüm

1060

Machine tap for UNJF-threads

Machine tap for UNJF-threads. Designation: Machine tap for UNJF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 önüm

1156

VBMX indexable insert

VBMX indexable insert. Designation: VBMX indexable insert, Diameter range: 12.001 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

2 önüm

1002

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 önüm

1200

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

13 önüm

1258

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

8 önüm

1201

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 önüm

1255

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 önüm

1270

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

1058

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 önüm

1266

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

1059

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 önüm

1152

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

1063

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 önüm

1098

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

4 önüm

1061

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 önüm

1066

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

7 önüm

1144

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

8 önüm

1004

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

8 önüm

1269

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

7 önüm

1273

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

12 önüm

1090

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 önüm

1068

Machine tap for UNJF-threads

Machine tap for UNJF-threads. Designation: Machine tap for UNJF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 önüm

1062

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 önüm

1268

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

3 önüm

1091

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

1057

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 önüm

1100

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 önüm

1007

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

15 önüm

1142

Coolant duct tap for ISO metric threads

1 önüm

1722

Fluteless machine tap for ISO metric fine threads

2 önüm

1597

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 önüm

1723

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

8 önüm

1926

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

2 önüm

1720

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

1286

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 önüm

1285

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 önüm

1732

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 önüm

1710

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

1 önüm

1347

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 önüm

1568

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 önüm

1713

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

1 önüm

1284

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

2 önüm

1289

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 önüm

1718

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

1712

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

5 önüm

1716

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 önüm

1715

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 önüm

1818

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

7 önüm

1719

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

1599

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

1727

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 önüm

1569

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 önüm

1893

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

1293

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

1596

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 önüm

1708

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 önüm

1707

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 önüm

1595

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 önüm

1288

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 önüm

1580

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

6 önüm

1821

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

9 önüm

1294

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 önüm

1820

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

9 önüm

1565

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 önüm

1721

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 önüm

1287

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 önüm

1567

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 önüm

1717

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

1292

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 önüm

1691

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

6 önüm

1819

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

8 önüm

1725

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 önüm

1577

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

1726

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

5 önüm

1291

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 önüm

25910

Locking screw for tool holder

Locking screw for tool holder. Designation: Locking screw for tool holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 önüm

25912

Cylinder head screw

Cylinder head screw. Designation: Cylinder head screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

2 önüm

25908

Locking screw for parting off blade

Locking screw for parting off blade. Designation: Locking screw for parting off blade, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 önüm

2904

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

5 önüm

2902

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 önüm

2918

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

7 önüm

28400

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

2 önüm

28900

Clamping screw

Clamping screw. Designation: Clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

7 önüm

302

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

3016

PCD HSC face milling cutter

PCD HSC face milling cutter. Designation: PCD HSC face milling cutter, Diameter range: 32.000 mm – 125.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

7 önüm

2912

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

2911

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

2922

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

3079

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

17 önüm

2917

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

9 önüm

2923

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

2920

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 önüm

2900

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 önüm

2919

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

7 önüm

2906

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

6 önüm

323

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

4 önüm

3908

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 önüm

3996

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 önüm

375

Twist drill with coolant duct, flute length DIN 1870

Twist drill with coolant duct, flute length DIN 1870. Designation: Twist drill with coolant duct, flute length DIN 1870, Diameter range: 11.110 mm – 34.130

18 önüm

342

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 önüm

3911

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 önüm

3999

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 önüm

3907

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 önüm

339

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 önüm

333

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

7 önüm

4070

PCD HSC face milling cutter

PCD HSC face milling cutter. Designation: PCD HSC face milling cutter, Diameter range: 32.000 mm – 80.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

5 önüm

3997

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

15 önüm

3910

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

16 önüm

322

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

3994

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 önüm

371

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 11.000 mm – 26.990 mm,

19 önüm

3906

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

12 önüm

318

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 önüm

3993

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 önüm

4071

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

26 önüm

3995

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 önüm

376

Twist drill with coolant duct, flute length DIN 1870

Twist drill with coolant duct, flute length DIN 1870. Designation: Twist drill with coolant duct, flute length DIN 1870, Diameter range: 13.000 mm – 29.000

6 önüm

4059

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

6 önüm

3909

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

12 önüm

370

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 11.000 mm – 34.920 mm,

32 önüm

338

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 önüm

4058

Adjustment bolt

10 önüm

4777

Guide ring

Guide ring. Designation: Guide ring, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

1 önüm

4959

Component part for clamping set

Component part for clamping set. Designation: Component part for clamping set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

Adjusting screw for shrink fit chucks. Designation: Adjusting screw for shrink fit chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

6 önüm

4484

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

9 önüm

4879

Torx Plus bit insert

Torx Plus bit insert. Designation: Torx Plus bit insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

5 önüm

4492

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

13 önüm

4493

Fluteless machine tap for BSP-threads

Fluteless machine tap for BSP-threads. Designation: Fluteless machine tap for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 önüm

4161

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

9 önüm

4646

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 önüm

4121

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 önüm

4491

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

13 önüm

4488

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 önüm

4486

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

9 önüm

4637

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 önüm

4165

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

4305

Adjusting screw for synchro tapping chucks

Adjusting screw for synchro tapping chucks. Designation: Adjusting screw for synchro tapping chucks, Internal diameter: 4.10 mm, TABLE_INFO_PASSON: [{"attr

15 önüm

4931

Component part for clamping set

Component part for clamping set. Designation: Component part for clamping set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 önüm

4485

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

8 önüm

4575

ER precision collet

ER precision collet. Designation: ER precision collet, Diameter range: 3.0 - 2.5, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

4 önüm

4389

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 önüm

4143

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

9 önüm

4374

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

5 önüm

4574

ER precision collet

ER precision collet. Designation: ER precision collet, Internal diameter: 6.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

13 önüm

4437

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 önüm

4320

HSK-A morse taper holder

HSK-A morse taper holder. Designation: HSK-A morse taper holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{

16 önüm

4391

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 önüm

4918

Cleaning mandrel

Cleaning mandrel. Designation: Cleaning mandrel, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

11 önüm

4914

Cleaning mandrels

Cleaning mandrels. Designation: Cleaning mandrels, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

14 önüm

4905

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

12 önüm

4467

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 önüm

4953

Lock ring

Lock ring. Designation: Lock ring, Internal diameter: 125.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{

14 önüm

4382

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 önüm

4466

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 önüm

4902

Adjusting screw for HSK-A/HSK-E collet holders

Adjusting screw for HSK-A/HSK-E collet holders. Designation: Adjusting screw for HSK-A/HSK-E collet holders, Diameter range: 2.5 - 6, TABLE_INFO_PASSON: [{

15 önüm

4446

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 önüm

4649

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 önüm

4635

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 önüm

4394

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 önüm

4377

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

18 önüm

4159

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K"

5 önüm

4166

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

2 önüm

4378

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

18 önüm

4901

Adjusting screw for HSK-C collet holders

Adjusting screw for HSK-C collet holders. Designation: Adjusting screw for HSK-C collet holders, Diameter range: 6.0 - 10.0, TABLE_INFO_PASSON: [{"attr":"P

16 önüm

4908

Milling cutter retaining screw

Milling cutter retaining screw. Designation: Milling cutter retaining screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

7 önüm

4383

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 önüm

4175

ER collet holder

ER collet holder. Designation: ER collet holder, Diameter range: 8.00 - 7.50, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

25 önüm

4651

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 önüm

4941

Length adjusting screw for conventional cooling

Length adjusting screw for conventional cooling. Designation: Length adjusting screw for conventional cooling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

16 önüm

4607

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

4 önüm

4425

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

4469

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 önüm

4431

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

4125

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 önüm

4120

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 önüm

4907

Cylinder head screw

Cylinder head screw. Designation: Cylinder head screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

12 önüm

4650

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 önüm

4935

Fastening screw

Fastening screw. Designation: Fastening screw, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","

13 önüm

4238

ISO taper morse taper holder

ISO taper morse taper holder. Designation: ISO taper morse taper holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

9 önüm

4104

Locking washer

Locking washer. Designation: Locking washer, Internal diameter: 5.40 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

4 önüm

4495

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

9 önüm

4494

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 önüm

4145

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

7 önüm

4483

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

8 önüm

4904

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

15 önüm

4456

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

4468

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 önüm

4647

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 önüm

4487

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

23 önüm

4430

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

4634

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 önüm

4921

Hexagon-socket offset screw keys

Hexagon-socket offset screw keys. Designation: Hexagon-socket offset screw keys, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

11 önüm

4621

MQL HSK-A adjusting screw

MQL HSK-A adjusting screw. Designation: MQL HSK-A adjusting screw, Internal diameter: 4.10 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

71 önüm

4307

ER collet holder

ER collet holder. Designation: ER collet holder, Diameter range: 19.0 - 18.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

97 önüm

4436

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 önüm

4683

Machine tap for Rc (BSPT) threads

Machine tap for Rc (BSPT) threads. Designation: Machine tap for Rc (BSPT) threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"a

6 önüm

4900

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

7 önüm

4903

Clamping screw

Clamping screw. Designation: Clamping screw, Diameter range: 25, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{

12 önüm

4239

BT morse taper holder

BT morse taper holder. Designation: BT morse taper holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

12 önüm

4458

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 önüm

4906

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Diameter range: 8.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

9 önüm

4308

ER thread tap collet chuck

ER thread tap collet chuck. Designation: ER thread tap collet chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

48 önüm

4933

Fastening screw

Fastening screw. Designation: Fastening screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

13 önüm

4123

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 önüm

4122

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 önüm

4440

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 önüm

4489

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

33 önüm

4775

Guide ring

Guide ring. Designation: Guide ring, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

4 önüm

4993

Plug insert

Plug insert. Designation: Plug insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"at

3 önüm

4985

HSK-C sealing plug

HSK-C sealing plug. Designation: HSK-C sealing plug, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","

6 önüm

4980

Cleaning mandrels

Cleaning mandrels. Designation: Cleaning mandrels, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

4 önüm

4976

Centrifugal ring

Centrifugal ring. Designation: Centrifugal ring, Internal diameter: 50.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

6 önüm

4977

Adjusting screw for shrink fit chucks

Adjusting screw for shrink fit chucks. Designation: Adjusting screw for shrink fit chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

8 önüm

4961

Pressure ball screw

Pressure ball screw. Designation: Pressure ball screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

8 önüm

515

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

208 önüm

5497

Machine tap for UN-threads set

Machine tap for UN-threads set. Designation: Machine tap for UN-threads set, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

1 önüm

5521

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

119 önüm

530

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

203 önüm

5522

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

119 önüm

5559

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 önüm

5567

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 önüm

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

5755

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

3 önüm

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 önüm

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 önüm

6127

Threaded ring

Threaded ring. Designation: Threaded ring, Diameter range: 5.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"

3 önüm

5754

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Internal diameter: 3.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

4 önüm

5722

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 önüm

6022

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

3 önüm

6128

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

27 önüm

5740

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

15 önüm

5766

Sealing plug

Sealing plug. Designation: Sealing plug, Diameter range: 21.0 - 25.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"

36 önüm

6007

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSO

170 önüm

5751

Moulded steady rest bushing for two-fluted drills

Moulded steady rest bushing for two-fluted drills. Designation: Moulded steady rest bushing for two-fluted drills, Diameter range: 11.980 - 12.499, TABLE_I

84 önüm

5747

Drill bush

Drill bush. Designation: Drill bush, Diameter range: 0.900 mm – 40.000 mm, Internal diameter: 8.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

156 önüm

5749

Steady rest bushing for single and two-fluted drills

Steady rest bushing for single and two-fluted drills. Designation: Steady rest bushing for single and two-fluted drills, Diameter range: 4.750 - 4.999, Int

180 önüm

5750

Moulded steady rest bushing for single-fluted gun drills

Moulded steady rest bushing for single-fluted gun drills. Designation: Moulded steady rest bushing for single-fluted gun drills, Diameter range: 5.500 - 5.

158 önüm

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

5767

Moulded steady rest bushing for single-fluted gun drills

Moulded steady rest bushing for single-fluted gun drills. Designation: Moulded steady rest bushing for single-fluted gun drills, Diameter range: 21.510 - 2

106 önüm

6435

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 önüm

6292

VBMT indexable insert

VBMT indexable insert. Designation: VBMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

1 önüm

6431

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 önüm

6276

CNMU indexable insert

CNMU indexable insert. Designation: CNMU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"full"},{"attr":"K","val":"partial"

2 önüm

6275

CNMU indexable insert

CNMU indexable insert. Designation: CNMU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 önüm

6342

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

6294

CNMG indexable insert

CNMG indexable insert. Designation: CNMG indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"

3 önüm

6394

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

6362

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 önüm

6396

TCHT indexable insert

6 önüm

6427

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

13 önüm

6393

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

6360

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

6370

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

6358

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

6345

TCHT indexable insert

CCHW indexable insert. Designation: CCHW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

6338

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6323

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 önüm

6381

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 önüm

6349

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 önüm

6319

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

6206

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

13 önüm

6346

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 önüm

6359

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

6365

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 önüm

6355

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

11 önüm

6277

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

13 önüm

6296

CNMU indexable insert

CNMU indexable insert. Designation: CNMU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 önüm

6336

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 önüm

6339

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6282

CCHX indexable insert

CCHX indexable insert. Designation: CCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

13 önüm

6369

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

6385

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 önüm

6352

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 önüm

6375

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 önüm

6341

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6390

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6327

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 önüm

6350

SCHW indexable insert

SCHW indexable insert. Designation: SCHW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

14 önüm

6211

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

12 önüm

6304

SCHX indexable insert

8 önüm

6340

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6284

CCHX indexable insert

CCHX indexable insert. Designation: CCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

13 önüm

6325

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 önüm

6209

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 önüm

6297

CNMG indexable insert

CNMG indexable insert. Designation: CNMG indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 önüm

6207

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

11 önüm

6317

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 önüm

6386

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

13 önüm

6291

VBMT indexable insert

VBMT indexable insert. Designation: VBMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 önüm

6351

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 önüm

6604

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 önüm

6531

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 önüm

6603

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 önüm

6527

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

13 önüm

6621

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 önüm

6598

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6656

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 önüm

6693

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

13 önüm

6535

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 önüm

6607

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6613

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 önüm

6620

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

7 önüm

6609

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 önüm

6686

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 önüm

6664

CCHX indexable insert

CCHX indexable insert. Designation: CCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 önüm

6641

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 önüm

6648

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 önüm

6625

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 önüm

6687

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 önüm

6632

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 önüm

6608

TCHT indexable insert

7 önüm

6629

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 önüm

6606

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6655

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"parti

7 önüm

6611

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 önüm

6640

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 önüm

6661

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

9 önüm

6622

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 önüm

6627

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 önüm

6647

SCHT indexable insert

11 önüm

6660

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"parti

11 önüm

6628

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 önüm

6635

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 önüm

6639

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 önüm

6680

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 önüm

6618

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 önüm

6630

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 önüm

6610

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 önüm

6688

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 önüm

6624

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 önüm

6597

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 önüm

6679

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 önüm

6626

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 önüm

6600

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6616

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7466

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 önüm

7718

VBMW indexable insert

VBMW indexable insert. Designation: VBMW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 önüm

7715

RNGN indexable insert

RNGN indexable insert. Designation: RNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 önüm

7849

DCGW indexable insert

2 önüm

7467

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 önüm

7735

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 önüm

7472

TNGN indexable insert

TNGN indexable insert. Designation: TNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 önüm

7745

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7839

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 önüm

7721

VBMW indexable insert

VBMW indexable insert. Designation: VBMW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 önüm

7749

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 önüm

7764

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

3 önüm

7675

SCGW indexable insert

SCGW indexable insert. Designation: SCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

7 önüm

7455

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 önüm

7471

TNGN indexable insert

TNGN indexable insert. Designation: TNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 önüm

7743

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

7689

CNGN indexable insert

CNGN indexable insert. Designation: CNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

6907

SNHQ indexable insert

SNHQ indexable insert. Designation: SNHQ indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 önüm

7671

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7759

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 önüm

7760

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 önüm

7844

SCGT indexable insert with chip breaker

SCGT indexable insert with chip breaker. Designation: SCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 önüm

7838

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7799

CCGT indexable insert

CCGT indexable insert. Designation: CCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 önüm

7811

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7477

CNGN indexable insert

CNGN indexable insert. Designation: CNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

4 önüm

7754

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

3 önüm

7847

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 önüm

7736

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 önüm

7771

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7758

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 önüm

7713

CNGW indexable insert

CNGW indexable insert. Designation: CNGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 önüm

7748

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7757

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 önüm

7767

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

7479

HCXX indexable insert

HCXX indexable insert. Designation: HCXX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

3 önüm

7688

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 önüm

7755

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

3 önüm

7805

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

7672

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7761

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 önüm

6911

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 önüm

7773

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7834

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 önüm

7740

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{

4 önüm

7676

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7798

CPGW indexable insert

CPGW indexable insert. Designation: CPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 önüm

7816

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

7774

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7814

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

7480

HCXX indexable insert

HCXX indexable insert. Designation: HCXX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"

3 önüm

7478

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

5 önüm

760

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

5 önüm

7824

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6909

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 önüm

7788

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

9 önüm

7742

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

7827

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

7452

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 önüm

7820

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7716

SCGN indexable insert

SCGN indexable insert. Designation: SCGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 önüm

7445

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 önüm

7450

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 önüm

7823

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7802

CCGT indexable insert

CCGT indexable insert. Designation: CCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 önüm

7746

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 önüm

7663

TPGW indexable insert

TPGW indexable insert. Designation: TPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

9 önüm

757

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 önüm

7763

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

3 önüm

7815

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

7787

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

9 önüm

7708

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

VBMW indexable insert. Designation: VBMW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 önüm

7791

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

9 önüm

7835

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 önüm

7750

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7667

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 önüm

7780

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

9 önüm

7833

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 önüm

7669

CPGW indexable insert

CPGW indexable insert. Designation: CPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 önüm

7817

VBGW indexable insert

VBGW indexable insert. Designation: VBGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

7808

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

6876

90° Chamfering milling cutter SpyroTec

90° Chamfering milling cutter SpyroTec. Designation: 90° Chamfering milling cutter SpyroTec, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"at

6 önüm

7456

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 önüm

7752

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

753

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 önüm

7665

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 önüm

7709

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 önüm

7775

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

764

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

8 önüm

7723

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 önüm

6908

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 önüm

7782

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

9 önüm

7821

VBGW indexable insert

7 önüm

7804

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

7772

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 önüm

7846

SCGT indexable insert with chip breaker

SCGT indexable insert with chip breaker. Designation: SCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

7753

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 önüm

7666

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

8 önüm

7664

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

8 önüm

7830

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 önüm

7744

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 önüm

7785

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

9 önüm

7829

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 önüm

7790

DNGA indexable insert

DNGA indexable insert. Designation: DNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

9 önüm

7765

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

3 önüm

7770

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 önüm

7668

CPGW indexable insert

CPGW indexable insert. Designation: CPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 önüm

909

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 önüm

872

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

935

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 önüm

874

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

5 önüm

887

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

5 önüm

877

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 önüm

938

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

1 önüm

936

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

8 önüm

880

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 önüm

875

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

910

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 önüm

903

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

939

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K"

4 önüm

4397

Collet holder HSK-E

Collet holder HSK-E. Designation: Collet holder HSK-E, Diameter range: 1.0 - 13.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

12 önüm

4475

Collet holder HSK-E

Collet holder HSK-E. Designation: Collet holder HSK-E, Diameter range: 1.0 - 7.5, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

8 önüm

4476

Collet holder HSK-A

Collet holder HSK-A. Designation: Collet holder HSK-A, Diameter range: 1.0 - 7.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

8 önüm

4303

Collet holder HSK-C

Collet holder HSK-C. Designation: Collet holder HSK-C, Diameter range: 1.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

12 önüm

4323

Collet holder, sealed version HSK-C

Collet holder, sealed version HSK-C. Designation: Collet holder, sealed version HSK-C, Diameter range: 0.5 - 13.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-

12 önüm

4304

Collet holder HSK-A

Collet holder HSK-A. Designation: Collet holder HSK-A, Diameter range: 3.0 - 26.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

23 önüm

4245

Collet holder MAS/BT

Collet holder MAS/BT. Designation: Collet holder MAS/BT, Diameter range: 1.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

8 önüm

4324

Collet holder, sealed version HSK-A

Collet holder, sealed version HSK-A. Designation: Collet holder, sealed version HSK-A, Diameter range: 3.0 - 26.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-

21 önüm

4318

SK collet holder

SK collet holder. Designation: SK collet holder, Diameter range: 2.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

11 önüm

4827

SK collet holder

SK collet holder. Designation: SK collet holder, Diameter range: 0.5 - 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

27 önüm

3156

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

3099

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 9.525 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val

4 önüm

3097

High-performance roughing end mill RS 100 U

High-performance roughing end mill RS 100 U. Designation: High-performance roughing end mill RS 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PAS

7 önüm

3100

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 9.525 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

5 önüm

3188

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"at

7 önüm

3183

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P",

6 önüm

3078

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

7 önüm

3081

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 önüm

3184

Roughing end mill GS 100 A (coarse teeth)

Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON:

7 önüm

3167

End mill with corner radius (4-fluted)

End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"at

9 önüm

3090

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 6.350 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 önüm

3115

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 7.938 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":

6 önüm

3114

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.175 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 önüm

6484

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

10 önüm

3095

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

7 önüm

3152

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

3091

Multi-tooth end mill with corner radius GH 100 U

Multi-tooth end mill with corner radius GH 100 U. Designation: Multi-tooth end mill with corner radius GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABL

20 önüm

3322

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 önüm

6485

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

11 önüm

3166

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 önüm

3093

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

3153

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

34 önüm

3155

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

9 önüm

3161

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

33 önüm

3165

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

33 önüm

3186

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"at

7 önüm

3182

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P",

6 önüm

3150

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

34 önüm

3190

Hard roughing end mill GS 100 H (fine teeth)

Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_P

6 önüm

3098

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PAS

7 önüm

3162

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

8 önüm

3096

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 önüm

3178

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

3082

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 önüm

3179

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

3080

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

13 önüm

3077

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 önüm

3180

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 önüm

19957

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

3189

Hard roughing end mill GS 100 H (fine teeth)

Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_P

6 önüm

3340

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":

17 önüm

3089

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

17 önüm

3113

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 önüm

19960

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 önüm

19956

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

3164

End mill with corner radius (4-fluted)

End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"at

9 önüm

19959

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

3181

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 önüm

4257

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 önüm

4265

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

10 önüm

4260

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 önüm

4251

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 önüm

4264

Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

4253

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 12.700 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","va

4 önüm

4259

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 önüm

3705

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 önüm

3432

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 16.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

5 önüm

4258

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 önüm

4256

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 önüm

4261

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

4255

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PAS

9 önüm

4266

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 önüm

4263

Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

4252

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 önüm

3876

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

17 önüm

4250

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 önüm

4254

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PAS

10 önüm

4262

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 önüm

3429

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 önüm

7649

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 önüm

7644

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 önüm

6840

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P",

6 önüm

6891

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 önüm

6898

Ratio milling cutter RS 100 U

Ratio milling cutter RS 100 U. Designation: Ratio milling cutter RS 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

6998

Ratio end mill RF 100 7 Speed

Ratio end mill RF 100 7 Speed. Designation: Ratio end mill RF 100 7 Speed, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

4720

Centering ring

Centering ring. Designation: Centering ring, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

9 önüm

4310

ER collet holder

ER collet holder. Designation: ER collet holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

7 önüm

6897

Ratio milling cutter RS 100 F

Ratio milling cutter RS 100 F. Designation: Ratio milling cutter RS 100 F, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

4435

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

1 önüm

6776

Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 önüm

6990

Ratio end mill RF 100 5 Speed

9 önüm

6774

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

6892

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

29 önüm

6462

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"

10 önüm

4326

Synchro tapping chuck with straight shank

Synchro tapping chuck with straight shank. Designation: Synchro tapping chuck with straight shank, Diameter range: 4.0 - 20.0, TABLE_INFO_PASSON: [{"attr":

2 önüm

4342

Quick change tapping chuck

Quick change tapping chuck. Designation: Quick change tapping chuck, Diameter range: M3 - M12, Internal diameter: 31.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

2 önüm

4340

Quick change tapping chuck

Quick change tapping chuck. Designation: Quick change tapping chuck, Diameter range: M3 - M12, Internal diameter: 31.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

2 önüm

1083

Twist drill set AeroX

Twist drill set AeroX. Designation: Twist drill set AeroX, Diameter range: 1.0 - 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

3 önüm

3145

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

5 önüm

3144

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 önüm

3142

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 önüm

3143

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 önüm

3452

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 önüm

3836

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

3458

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

26 önüm

3453

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

3460

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

3459

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 önüm

3694

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 önüm

3456

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 26.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

24 önüm

1199

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

118 önüm

1259

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

107 önüm

1146

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.400 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

129 önüm

3504

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 125.000 mm, Internal diameter: 22.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 önüm

3176

Quadrant milling cutter

Quadrant milling cutter. Designation: Quadrant milling cutter, Diameter range: 10.000 mm – 56.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr"

11 önüm

3342

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

12 önüm

3346

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

20 önüm

3343

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

20 önüm

3347

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

15 önüm

3433

End mill

End mill. Designation: End mill, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 önüm

3431

End mill

End mill. Designation: End mill, Diameter range: 3.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

20 önüm

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

2 önüm

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"a

5 önüm

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 6.0 - 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

5 önüm

3530

Side and face cutters

Side and face cutters. Designation: Side and face cutters, Diameter range: 50.000 mm – 200.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr"

35 önüm

3579

Woodruff cutter

Woodruff cutter. Designation: Woodruff cutter, Diameter range: 4.500 mm – 45.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

21 önüm

3580

Woodruff cutter

Woodruff cutter. Designation: Woodruff cutter, Diameter range: 4.500 mm – 45.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

24 önüm

3700

End mill

End mill. Designation: End mill, Diameter range: 10.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val"

9 önüm

1131

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

44 önüm

1132

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

40 önüm

4105

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 30.00 - 31.99, TABLE_INFO_PASS

28 önüm

4106

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 önüm

4110

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

84 önüm

4107

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 önüm

4109

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

87 önüm

4108

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 önüm

5242

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 34.51 - 37.50, TABLE_INFO_PASS

28 önüm

5243

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 37.51 - 40.50, TABLE_INFO_PASS

28 önüm

5248

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 20.01 - 21.00, TABLE_INFO_PASS

28 önüm

4208

HPC extension

HPC extension. Designation: HPC extension, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

5 önüm

2016

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 önüm

2014

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 önüm

1261

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

1 önüm

1135

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

9 önüm

2045

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

20 önüm

1134

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

9 önüm

129

Twist drill with shank dia. 25.4 mm

Twist drill with shank dia. 25.4 mm. Designation: Twist drill with shank dia. 25.4 mm, Diameter range: 25.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"

15 önüm

128

Twist drill with shank dia. 16.0 mm

Twist drill with shank dia. 16.0 mm. Designation: Twist drill with shank dia. 16.0 mm, Diameter range: 16.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"

29 önüm

1263

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"

9 önüm

1224

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 30.160 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"att

28 önüm

1221

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

102 önüm

1223

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

106 önüm

1222

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 30.160 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

22 önüm

136

Twist drill with shank dia. 25.4 mm

Twist drill with shank dia. 25.4 mm. Designation: Twist drill with shank dia. 25.4 mm, Diameter range: 25.000 mm – 39.000 mm, TABLE_INFO_PASSON: [{"attr":"

9 önüm

2047

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

97 önüm

2048

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

90 önüm

2458

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.400 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

149 önüm

2997

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

106 önüm

374

Twist drill with coolant duct, flute length DIN 1870

Twist drill with coolant duct, flute length DIN 1870. Designation: Twist drill with coolant duct, flute length DIN 1870, Diameter range: 11.000 mm – 34.000

23 önüm

351

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 31.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"

10 önüm

3570

T-slot end mill

T-slot end mill. Designation: T-slot end mill, Diameter range: 12.500 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

9 önüm

363

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 7.000 mm – 46.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

56 önüm

336

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

209 önüm

330

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.450 mm – 35.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

173 önüm

381

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

7 önüm

5676

82° Countersink SpyroTec set

82° Countersink SpyroTec set. Designation: 82° Countersink SpyroTec set, Diameter range: 6.35 - 19.05, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

1 önüm

5538

90° countersink SpyroTec set

90° countersink SpyroTec set. Designation: 90° countersink SpyroTec set, Diameter range: 6.30 - 20.50, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

2 önüm

5539

90° countersink SpyroTec set

90° countersink SpyroTec set. Designation: 90° countersink SpyroTec set, Diameter range: 6.30 - 25.00, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

2 önüm

5680

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

8 önüm

5677

82° Countersink SpyroTec set

82° Countersink SpyroTec set. Designation: 82° Countersink SpyroTec set, Diameter range: 6.35 - 19.05, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

1 önüm

620

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 9.520 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

36 önüm

608

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 9.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val

68 önüm

6503

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

8 önüm

621

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 9.520 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

24 önüm

610

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

192 önüm

571

Extra length twist drill, series 3

Extra length twist drill, series 3. Designation: Extra length twist drill, series 3, Diameter range: 2.500 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

65 önüm

6034

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

111 önüm

572

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

104 önüm

622

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

262 önüm

661

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 7.940 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

34 önüm

663

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 10.500 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val"

22 önüm

658

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

209 önüm

659

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.500 mm – 15.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

218 önüm

9672

Extra length twist drill, series 3

Extra length twist drill, series 3. Designation: Extra length twist drill, series 3, Diameter range: 2.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

19 önüm

9670

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

54 önüm

9000

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

61 önüm

3134

End mills with ISO taper

End mills with ISO taper. Designation: End mills with ISO taper, Diameter range: 32.000 mm – 80.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"att

3 önüm

3120

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 16.000 mm – 63.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

18 önüm

3130

End mills with ISO taper

End mills with ISO taper. Designation: End mills with ISO taper, Diameter range: 32.000 mm – 80.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"att

2 önüm

3121

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 16.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

9 önüm

3118

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 10.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

12 önüm

3117

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 10.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

14 önüm

3440

Morse taper end mill

Morse taper end mill. Designation: Morse taper end mill, Diameter range: 13.000 mm – 45.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

13 önüm

6118

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 4.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 önüm

6117

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 4.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 önüm

239

DIN 338

DIN 338. TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H"

342 önüm

3663

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 önüm

3695

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 önüm

3664

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

24 önüm

3651

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

23 önüm

3451

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 önüm

417

Replacement blades for hand reamers

Replacement blades for hand reamers. Designation: Replacement blades for hand reamers, Diameter range: 24.00 - 27.50, TABLE_INFO_PASSON: [{"attr":"P","val"

20 önüm

4524

MQL synchro tapping chuck with straight shanks

MQL synchro tapping chuck with straight shanks. Designation: MQL synchro tapping chuck with straight shanks, Diameter range: 6.0 - 16.0, Internal diameter:

2 önüm

5492

PCD slot drill (2-fluted)

PCD slot drill (2-fluted). Designation: PCD slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

17 önüm

5495

PCD slot drill (3-fluted)

PCD slot drill (3-fluted). Designation: PCD slot drill (3-fluted), Diameter range: 14.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

8 önüm

3535

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 önüm

3537

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 önüm

234

Twist drills-Set

108 önüm

892

Nut tap for ISO metric threads

Nut tap for ISO metric threads. Designation: Nut tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

108 önüm

2017

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 önüm

2015

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 önüm

1262

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 35.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"

63 önüm

1319

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 6.600 mm – 21.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

5 önüm

1147

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.600 mm – 21.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

1136

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

9 önüm

1228

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

142 önüm

1323

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 6.000 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

5 önüm

1133

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

9 önüm

1326

90° Countersink

208 önüm

2459

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

125 önüm

244

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 10.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

3 önüm

2498

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

105 önüm

221

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.450 mm – 17.100 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

41 önüm

250

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 önüm

243

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 8.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

4 önüm

2461

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

113 önüm

246

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 6.700 mm – 25.250 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

19 önüm

242

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

5 önüm

251

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 76.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

47 önüm

247

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 3.200 mm – 55.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

47 önüm

252

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

35 önüm

238

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

225

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 22.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

116 önüm

237

Extra length twist drill, series 3

Extra length twist drill, series 3. Designation: Extra length twist drill, series 3, Diameter range: 3.500 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

35 önüm

248

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 6.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

26 önüm

228

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 22.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

101 önüm

224

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.650 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

144 önüm

253

Twist drill with coolant duct, flute length to company standard

Twist drill with coolant duct, flute length to company standard. Designation: Twist drill with coolant duct, flute length to company standard, Diameter ran

38 önüm

229

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 8.000 mm – 59.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

44 önüm

249

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

2457

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

94 önüm

2460

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

109 önüm

255

Twist drill with coolant duct, flute length to company standard

Twist drill with coolant duct, flute length to company standard. Designation: Twist drill with coolant duct, flute length to company standard, Diameter ran

38 önüm

254

Twist drill with coolant duct, flute length to company standard

Twist drill with coolant duct, flute length to company standard. Designation: Twist drill with coolant duct, flute length to company standard, Diameter ran

46 önüm

227

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.750 mm – 29.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

92 önüm

240

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 18.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

76 önüm

269

Twist drill with coolant duct, short

Twist drill with coolant duct, short. Designation: Twist drill with coolant duct, short, Diameter range: 9.920 mm – 23.020 mm, TABLE_INFO_PASSON: [{"attr":

50 önüm

266

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 7.800 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

78 önüm

236

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 2.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

59 önüm

267

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 7.700 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

54 önüm

226

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.320 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

388 önüm

223

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.300 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

400 önüm

2462

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

59 önüm

235

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 1.600 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

116 önüm

245

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 2.000 mm – 101.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

400 önüm

268

Twist drill with shank dia. 12.7 mm

Twist drill with shank dia. 12.7 mm. Designation: Twist drill with shank dia. 12.7 mm, Diameter range: 13.000 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"

30 önüm

2456

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

126 önüm

305

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.200 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

400 önüm

308

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.320 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

205 önüm

286

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 2.000 mm – 3.150 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

1 önüm

270

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 10.000 mm – 49.000 mm,

40 önüm

299

Twist drill extra-long

13 önüm

271

Twist drill with coolant duct, flute lengthDIN 341

Twist drill with coolant duct, flute lengthDIN 341. Designation: Twist drill with coolant duct, flute lengthDIN 341, Diameter range: 10.000 mm – 47.000 mm,

58 önüm

317

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.500 mm – 29.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

183 önüm

3187

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 160.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

6 önüm

329

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.400 mm – 48.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

400 önüm

3185

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 125.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

6 önüm

487

Counterbore with pilots for tapping size holes

Counterbore with pilots for tapping size holes. Designation: Counterbore with pilots for tapping size holes, Diameter range: 18.000 mm – 33.000 mm, TABLE_I

3 önüm

437

90° Countersink for medium tolerances

90° Countersink for medium tolerances. Designation: 90° Countersink for medium tolerances, Diameter range: 6.600 mm – 21.500 mm, TABLE_INFO_PASSON: [{"attr

6 önüm

481

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 25.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

2 önüm

396

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

94 önüm

472

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 6.300 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

6 önüm

4636

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

3654

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 100.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

4 önüm

3749

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 100.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 önüm

463

Counterbore with interchangeable pilots

Counterbore with interchangeable pilots. Designation: Counterbore with interchangeable pilots, Diameter range: 15.000 mm – 63.000 mm, TABLE_INFO_PASSON: [{

8 önüm

345

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 3.000 mm – 67.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

152 önüm

471

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 16.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 önüm

483

Counterbore fixed pilots for medium tolerances

Counterbore fixed pilots for medium tolerances. Designation: Counterbore fixed pilots for medium tolerances, Diameter range: 6.000 mm – 20.000 mm, TABLE_IN

8 önüm

4648

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

477

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 15.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

17 önüm

325

Counterbore fixed pilots for medium tolerances

Counterbore fixed pilots for medium tolerances. Designation: Counterbore fixed pilots for medium tolerances, Diameter range: 6.000 mm – 18.000 mm, TABLE_IN

6 önüm

328

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 25.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

5 önüm

438

90° Countersink for tapping size holes

90° Countersink for tapping size holes. Designation: 90° Countersink for tapping size holes, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"at

6 önüm

379

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

474

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

4 önüm

479

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 16.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

1 önüm

326

Counterbore with pilots for tapping size holes

Counterbore with pilots for tapping size holes. Designation: Counterbore with pilots for tapping size holes, Diameter range: 6.000 mm – 20.000 mm, TABLE_IN

7 önüm

480

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 16.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

1 önüm

380

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 önüm

378

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

486

Counterbore fixed pilots for medium tolerances

Counterbore fixed pilots for medium tolerances. Designation: Counterbore fixed pilots for medium tolerances, Diameter range: 18.000 mm – 40.000 mm, TABLE_I

6 önüm

475

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 16.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 önüm

482

Counterbore with pilots for fine tolerances

Counterbore with pilots for fine tolerances. Designation: Counterbore with pilots for fine tolerances, Diameter range: 2.200 mm – 20.000 mm, TABLE_INFO_PAS

13 önüm

324

Counterbore with pilots for fine tolerances

Counterbore with pilots for fine tolerances. Designation: Counterbore with pilots for fine tolerances, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PAS

7 önüm

485

Counterbore with pilots for fine tolerances

Counterbore with pilots for fine tolerances. Designation: Counterbore with pilots for fine tolerances, Diameter range: 18.000 mm – 40.000 mm, TABLE_INFO_PA

6 önüm

470

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

4 önüm

327

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 5.000 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

16 önüm

390

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 3.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"at

25 önüm

478

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

4 önüm

436

90° Countersink for fine tolerances

90° Countersink for fine tolerances. Designation: 90° Countersink for fine tolerances, Diameter range: 2.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P

12 önüm

484

Counterbore with pilots for tapping size holes

Counterbore with pilots for tapping size holes. Designation: Counterbore with pilots for tapping size holes, Diameter range: 6.000 mm – 20.000 mm, TABLE_IN

7 önüm

473

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 16.000 mm – 80.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

8 önüm

476

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 4.300 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

26 önüm

498

Countersinks set 90°

Countersinks set 90°. Designation: Countersinks set 90°, Diameter range: 6.30 - 20.50, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

1 önüm

499

Countersinks set 90°

Countersinks set 90°. Designation: Countersinks set 90°, Diameter range: 6.30 - 20.50, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

2 önüm

5500

90° Countersink SpyroTec

90° Countersink SpyroTec. Designation: 90° Countersink SpyroTec, Diameter range: 6.300 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

15 önüm

5503

90° Countersink SpyroTec

90° Countersink SpyroTec. Designation: 90° Countersink SpyroTec, Diameter range: 6.300 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 önüm

5501

90° Countersink SpyroTec

90° Countersink SpyroTec. Designation: 90° Countersink SpyroTec, Diameter range: 6.300 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

15 önüm

5523

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

208 önüm

526

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 5.800 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P",

52 önüm

5520

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

208 önüm

5519

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

208 önüm

502

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 1.950 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

132 önüm

503

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

88 önüm

527

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 7.800 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

54 önüm

529

Extra length twist drill, series 3

Extra length twist drill, series 3. Designation: Extra length twist drill, series 3, Diameter range: 2.500 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

16 önüm

506

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.400 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

44 önüm

550

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

183 önüm

552

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

276 önüm

542

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 8.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

28 önüm

524

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 2.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P",

90 önüm

535

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

261 önüm

549

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

339 önüm

504

Extra length twist drill, series 3

Extra length twist drill, series 3. Designation: Extra length twist drill, series 3, Diameter range: 2.500 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

75 önüm

525

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 7.900 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

22 önüm

501

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 32.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

230 önüm

5673

60° Countersink SpyroTec set

60° Countersink SpyroTec set. Designation: 60° Countersink SpyroTec set, Diameter range: 6.30 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr"

1 önüm

5537

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 14.290 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

208 önüm

559

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

7 önüm

5672

60° Countersink SpyroTec set

60° Countersink SpyroTec set. Designation: 60° Countersink SpyroTec set, Diameter range: 6.30 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr"

Twist drill. Designation: Twist drill, Diameter range: 7.940 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

30 önüm

568

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 önüm

566

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 8.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

19 önüm

565

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 6.000 mm – 17.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

15 önüm

5678

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 önüm

563

Twist drill extra-long

Twist drill extra-long. Designation: Twist drill extra-long, Diameter range: 6.000 mm – 7.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M"

4 önüm

560

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 2.370 mm – 5.610 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"

75 önüm

567

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

16 önüm

562

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 2.400 mm – 5.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

17 önüm

553

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

247 önüm

5739

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

15 önüm

617

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 15.870 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

220 önüm

6008

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSO

161 önüm

619

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

44 önüm

618

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 2.700 mm – 11.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

70 önüm

605

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.200 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

353 önüm

629

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

100 önüm

6006

Twist drill with standard shank

Twist drill with standard shank. Designation: Twist drill with standard shank, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

161 önüm

5736

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

12 önüm

6005

Twist drill with standard shank

Twist drill with standard shank. Designation: Twist drill with standard shank, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

236 önüm

645

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 9.520 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

53 önüm

592

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 12.700 mm – 28.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

19 önüm

587

Centre drills with flat

Centre drills with flat. Designation: Centre drills with flat, Diameter range: 1.600 mm – 12.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

10 önüm

589

Centre drills with flat

Centre drills with flat. Designation: Centre drills with flat, Diameter range: 1.600 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 önüm

586

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

11 önüm

614

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

11 önüm

582

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 12.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

14 önüm

613

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

12 önüm

591

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

8 önüm

583

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 12.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

14 önüm

588

Centre drills with flat

Centre drills with flat. Designation: Centre drills with flat, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

9 önüm

6504

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 6.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 10.200 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

105 önüm

657

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.500 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

194 önüm

662

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 29.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"

24 önüm

655

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 4.200 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

42 önüm

670

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 1.980 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P",

60 önüm

665

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.300 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

63 önüm

671

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 2.300 mm – 8.500 mm, TABLE_INFO_PASSON: [{"attr":"P","

36 önüm

654

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 3.000 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

139 önüm

652

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

241 önüm

668

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

184 önüm

664

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.500 mm – 17.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

182 önüm

667

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.500 mm – 22.220 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

227 önüm

653

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.500 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

319 önüm

985

Set Hand taps for UNF-threads

Set Hand taps for UNF-threads. Designation: Set Hand taps for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

17 önüm

981

Set Hand taps for UNC-threads

Set Hand taps for UNC-threads. Designation: Set Hand taps for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

20 önüm

905

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

10 önüm

986

Hand tap for UNF-threads

Hand tap for UNF-threads. Designation: Hand tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

21 önüm

960

Hand tap for pipe threads

Hand tap for pipe threads. Designation: Hand tap for pipe threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"

13 önüm

9671

Extra length twist drill, series 2

Extra length twist drill, series 2. Designation: Extra length twist drill, series 2, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

34 önüm

907

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

11 önüm

650

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

8 önüm

987

Hand tap for UNF-threads

Hand tap for UNF-threads. Designation: Hand tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

22 önüm

982

Hand tap for UNC-threads

Hand tap for UNC-threads. Designation: Hand tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

25 önüm

954

Set Hand taps for BSW-threads

Set Hand taps for BSW-threads. Designation: Set Hand taps for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

17 önüm

862

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

38 önüm

984

Hand tap for UNC-threads

Hand tap for UNC-threads. Designation: Hand tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

22 önüm

983

Hand tap for UNC-threads

Hand tap for UNC-threads. Designation: Hand tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

24 önüm

886

Hand tap for ISO metric fine threads

Hand tap for ISO metric fine threads. Designation: Hand tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

51 önüm

959

Hand tap for pipe threads

Hand tap for pipe threads. Designation: Hand tap for pipe threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"

12 önüm

882

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

14 önüm

864

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

34 önüm

885

Hand tap for ISO metric fine threads

Hand tap for ISO metric fine threads. Designation: Hand tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

55 önüm

958

Set Hand taps for BSP-threads

Set Hand taps for BSP-threads. Designation: Set Hand taps for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

13 önüm

861

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

33 önüm

906

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

12 önüm

883

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

14 önüm

884

Set Hand taps for ISO metric fine threads

Set Hand taps for ISO metric fine threads. Designation: Set Hand taps for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

51 önüm

9651

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

175 önüm

863

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr"

37 önüm

904

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

10 önüm

672

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.800 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

118 önüm

3670

End mill

End mill. Designation: End mill, Diameter range: 2.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

31 önüm

3669

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

19 önüm

3692

End mill

End mill. Designation: End mill, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

19 önüm

3698

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

12 önüm

3690

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

21 önüm

3428

End mill

End mill. Designation: End mill, Diameter range: 2.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

32 önüm

3706

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 16.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

5 önüm

3650

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

15 önüm

3668

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 önüm

3660

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":

17 önüm

6756

Roughing end mill GS 80 (fine teeth)

Roughing end mill GS 80 (fine teeth). Designation: Roughing end mill GS 80 (fine teeth), Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

13 önüm

511

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.300 mm – 17.460 mm, TABLE_INFO_PASSO

38 önüm

3550

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

1 önüm

3517

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 önüm

3519

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4138

Drill thread milling cutter for UNC-threads

Drill thread milling cutter for UNC-threads. Designation: Drill thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 önüm

3518

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 önüm

3516

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 önüm

433

Spot facer

Spot facer. Designation: Spot facer, Diameter range: 8.000 mm – 27.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

2 önüm

1280

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

1 önüm

1903

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 önüm

1909

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

1 önüm

1970

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

6 önüm

1925

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 önüm

1894

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

1340

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 önüm

1342

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 önüm

1592

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

1 önüm

1283

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

2 önüm

1902

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 önüm

1590

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

1 önüm

1254

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 önüm

1274

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 önüm

1924

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

1 önüm

1594

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

4 önüm

1897

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 önüm

1900

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 önüm

1587

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

1898

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 önüm

1890

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 önüm

2008

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

6 önüm

1249

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 önüm

1277

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

2 önüm

1346

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

1 önüm

1891

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

1584

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 önüm

1589

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

6 önüm

1870

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

9 önüm

1341

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 önüm

1010

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

9 önüm

1276

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 önüm

1905

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 önüm

1873

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

11 önüm

1978

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

5 önüm

1011

Machine tap for EG/STI threads

2 önüm

1987

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 önüm

1838

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

9 önüm

1980

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

8 önüm

1593

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

4 önüm

1906

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

7 önüm

1871

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 önüm

1246

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 önüm

1872

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

14 önüm

1837

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

5 önüm

1979

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

11 önüm

1908

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

5 önüm

1895

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 önüm

1875

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 önüm

1892

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

4 önüm

1977

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

11 önüm

196

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 önüm

1896

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 önüm

1001

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

12 önüm

1088

Machine tap for NPT-threads

Machine tap for NPT-threads. Designation: Machine tap for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 önüm

1971

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

26 önüm

8888

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

13 önüm

1339

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

7 önüm

1049

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 önüm

1586

Fluteless machine tap for BSP-threads

Fluteless machine tap for BSP-threads. Designation: Fluteless machine tap for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

6 önüm

1915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

1084

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 önüm

8889

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

13 önüm

1914

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

1275

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

5 önüm

1917

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 önüm

1981

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 önüm

1918

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 önüm

1591

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

1 önüm

1874

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

8 önüm

1876

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 önüm

2086

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 önüm

2087

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

13 önüm

2449

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

1 önüm

2447

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 önüm

2444

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

3 önüm

2445

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

2 önüm

2446

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

2439

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 önüm

2511

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 önüm

2517

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

2 önüm

2514

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 önüm

2448

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

2 önüm

2438

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

2508

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 önüm

2442

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

2427

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 önüm

2426

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

3 önüm

2512

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 önüm

2403

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 önüm

2436

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

2425

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 önüm

2465

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 önüm

2443

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

2275

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 önüm

2440

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 önüm

2515

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 önüm

2437

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

5 önüm

2466

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 önüm

2428

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 önüm

2509

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 önüm

2513

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 önüm

2424

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

19 önüm

2982

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

1 önüm

2868

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

10 önüm

2898

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 önüm

2854

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

3 önüm

2855

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

8 önüm

2881

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

9 önüm

2878

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

5 önüm

2852

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 önüm

2792

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

5 önüm

2791

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 önüm

2710

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 önüm

2889

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 önüm

2876

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 önüm

2891

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 önüm

2870

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

13 önüm

2983

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

6 önüm

2941

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 önüm

2894

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

8 önüm

2875

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K"

6 önüm

2790

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 önüm

2859

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

11 önüm

2895

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

5 önüm

2989

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

2887

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

10 önüm

2842

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

5 önüm

2874

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 önüm

2861

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

12 önüm

2899

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 önüm

2986

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 önüm

2988

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 önüm

2990

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 önüm

2984

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 önüm

2998

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

5 önüm

2843

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

29 önüm

2985

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 önüm

2849

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

6 önüm

2999

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

7 önüm

2871

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

15 önüm

2864

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

17 önüm

2880

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

9 önüm

2942

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 önüm

2886

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

6 önüm

2850

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

273

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 önüm

2940

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

7 önüm

2858

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 önüm

2897

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

14 önüm

2862

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 önüm

2846

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 önüm

2981

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

1 önüm

2879

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

28 önüm

2872

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 önüm

2851

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

2860

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

10 önüm

2844

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

8 önüm

2888

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

39 önüm

2838

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

20 önüm

4441

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 önüm

4660

Tap with coolant ducts for UNC threads

10 önüm

3984

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 önüm

3964

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 önüm

3991

Machine tap for EG/STI threads

6 önüm

3972

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

12 önüm

4417

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 önüm

3973

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 önüm

4652

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 önüm

4158

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

7 önüm

3946

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 önüm

4656

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

12 önüm

4686

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 önüm

4156

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

7 önüm

3924

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 önüm

4433

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

4151

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 önüm

4685

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 önüm

3938

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

10 önüm

4392

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

17 önüm

3942

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

9 önüm

4571

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 önüm

4155

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 önüm

3950

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 önüm

319

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 önüm

3916

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 önüm

4424

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

4883

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 önüm

4423

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

4676

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

11 önüm

4412

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

347

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

10 önüm

4645

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 önüm

392

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 önüm

3961

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 önüm

4035

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

11 önüm

4428

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

3944

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

14 önüm

3981

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 önüm

3939

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 önüm

4036

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

11 önüm

3901

Machine tap for UNC-threads

14 önüm

4631

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 önüm

4640

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 önüm

3971

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

3914

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 önüm

3928

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

4860

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 önüm

3932

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

4415

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 önüm

4861

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

4 önüm

4152

Fluteless tap with coolant ducts for BSP threads

Fluteless tap with coolant ducts for BSP threads. Designation: Fluteless tap with coolant ducts for BSP threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 önüm

3975

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 önüm

4407

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

34 önüm

4627

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 önüm

4644

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 önüm

4429

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

4884

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 önüm

4625

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 önüm

4146

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 önüm

3945

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 önüm

4416

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

14 önüm

3917

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 önüm

4411

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 önüm

4886

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

31 önüm

4570

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 önüm

4406

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

25 önüm

4654

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 önüm

4887

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 önüm

4569

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 önüm

3915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 önüm

4413

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 önüm

4147

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 önüm

3979

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 önüm

4220

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

9 önüm

4641

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 önüm

3931

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

3900

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

3904

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 önüm

362

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 önüm

3912

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 önüm

4422

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

3937

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

10 önüm

3922

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 önüm

394

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

33 önüm

4639

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 önüm

4410

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

26 önüm

3930

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 önüm

3927

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 önüm

4331

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 önüm

3974

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 önüm

4633

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 önüm

4628

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 önüm

3967

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

3983

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 önüm

3988

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"a

8 önüm

4670

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 önüm

4677

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

11 önüm

3921

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 önüm

3934

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 önüm

4888

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 önüm

4659

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 önüm

4658

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 önüm

4219

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

33 önüm

4629

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 önüm

4404

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

28 önüm

4154

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 önüm

4153

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 önüm

3965

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 önüm

4638

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 önüm

4408

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

29 önüm

4671

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 önüm

4630

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 önüm

3920

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 önüm

3918

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 önüm

4402

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

39 önüm

3919

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 önüm

4418

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

4414

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

5570

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 önüm

5569

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 önüm

5568

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 önüm

5563

Machine tap for ISO metric threads

9 önüm

5596

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

9 önüm

5561

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 önüm

5564

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 önüm

5554

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 önüm

5557

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 önüm

5551

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 önüm

5595

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 önüm

5572

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 önüm

5558

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 önüm

5598

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

14 önüm

5552

Machine tap for ISO metric threads

10 önüm

5731

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

6 önüm

5733

Machine tap for ISO metric threads

6 önüm

5725

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

11 önüm

715

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

1 önüm

802

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

779

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 önüm

797

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 önüm

795

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 önüm

807

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 önüm

788

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 önüm

781

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

6 önüm

733

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 önüm

787

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

4 önüm

796

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 önüm

817

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 önüm

791

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 önüm

783

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 önüm

799

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 önüm

811

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

810

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

803

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 önüm

800

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 önüm

786

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

794

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 önüm

792

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

3 önüm

785

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 önüm

816

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

809

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

812

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

789

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

777

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 önüm

798

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 önüm

790

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 önüm

804

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

813

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 önüm

734

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 önüm

801

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 önüm

808

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 önüm

814

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 önüm

806

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 önüm

778

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 önüm

784

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

16 önüm

815

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

28 önüm

870

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 önüm

842

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

1 önüm

869

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

4 önüm

924

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 önüm

946

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 önüm

836

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 önüm

831

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

17 önüm

868

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 önüm

997

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

964

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

6 önüm

979

Machine tap for PG-threads

Machine tap for PG-threads. Designation: Machine tap for PG-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

9 önüm

867

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 önüm

920

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

9 önüm

965

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

8 önüm

860

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

14 önüm

912

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 önüm

876

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 önüm

950

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 önüm

980

Machine tap for PG-threads

Machine tap for PG-threads. Designation: Machine tap for PG-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

6 önüm

1069

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

5 önüm

850

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

9 önüm

853

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val"

13 önüm

911

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 önüm

947

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 önüm

871

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

2 önüm

844

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

889

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

12 önüm

922

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

840

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

1 önüm

992

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

819

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

15 önüm

854

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{

15 önüm

823

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

15 önüm

821

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 önüm

888

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 önüm

855

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{

15 önüm

908

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

17 önüm

856

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{

15 önüm

925

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

4 önüm

858

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

13 önüm

873

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

11 önüm

834

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

30 önüm

825

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 önüm

914

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

849

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 önüm

859

Hand tap for ISO metric threads

Hand tap for ISO metric threads. Designation: Hand tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

14 önüm

857

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

14 önüm

949

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 önüm

839

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

16 önüm

835

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 önüm

820

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

916

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 önüm

847

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 önüm

917

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 önüm

822

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 önüm

926

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

9 önüm

918

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

830

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

46 önüm

833

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

22 önüm

927

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

18 önüm

937

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

10 önüm

995

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 önüm

961

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"f

14 önüm

963

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

10 önüm

962

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

9 önüm

919

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

998

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 önüm

991

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

20 önüm

915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

31 önüm

973

Machine tap for NPT-threads

Machine tap for NPT-threads. Designation: Machine tap for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 önüm

827

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

49 önüm

828

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 önüm

866

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

6 önüm

923

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

15 önüm

967

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K"

7 önüm

890

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 önüm

930

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 önüm

837

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

829

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 önüm

826

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 önüm

843

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

9 önüm

928

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

6 önüm

931

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

12 önüm

846

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 önüm

948

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

20 önüm

838

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 önüm

865

Tap for ISO metric threads

Tap for ISO metric threads. Designation: Tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

3 önüm

824

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 önüm

845

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

13 önüm

945

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

18 önüm

932

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

16 önüm

913

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 önüm

966

Fluteless machine tap for BSP-threads

Fluteless machine tap for BSP-threads. Designation: Fluteless machine tap for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

7 önüm

993

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

13 önüm

832

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

47 önüm

929

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

8 önüm

848

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 önüm

968

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K"

12 önüm

818

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

25 önüm

996

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

10 önüm

921

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

15 önüm

184

Dies for UNF threads

Dies for UNF threads. Designation: Dies for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

2 önüm

172

Dies for BSW threads

Dies for BSW threads. Designation: Dies for BSW threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"a

4 önüm

512

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.000 mm – 16.670 mm, TABLE_INFO_PASSO

45 önüm

1189

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 2.800 mm – 21.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

12 önüm

3854

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr

4 önüm

3855

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr

4 önüm

4247

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

8 önüm

3849

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr

8 önüm

3866

HSC ball nose profile cutter GF 500 B

HSC ball nose profile cutter GF 500 B. Designation: HSC ball nose profile cutter GF 500 B, Diameter range: 4.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr

5 önüm

3853

HSC ball nose profile cutter GF 500 B

92 önüm

1028

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.500 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

1020

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 önüm

1024

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.100 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

4 önüm

1243

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 5.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

96 önüm

1242

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

123 önüm

1025

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

124 önüm

1027

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 19.500 mm, TABLE_INFO_PAS

29 önüm

1798

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

1 önüm

1702

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","v

106 önüm

1452

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

163 önüm

1451

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

116 önüm

25227

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

3 önüm

25226

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

3 önüm

25162

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 önüm

25190

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

7 önüm

25191

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 önüm

25297

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

4 önüm

25237

Cutting insert for Torx

Cutting insert for Torx. Designation: Cutting insert for Torx, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"f

6 önüm

25231

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

5 önüm

25218

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 önüm

25187

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 önüm

25203

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 önüm

25299

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

4 önüm

25186

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 önüm

25195

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 önüm

25202

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 önüm

2520

Round indexable insert

Round indexable insert. Designation: Round indexable insert, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

6 önüm

25229

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

5 önüm

25126

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 önüm

25222

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

3 önüm

25117

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

13 önüm

25151

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 önüm

25167

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 önüm

25116

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

13 önüm

25214

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 önüm

25178

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 önüm

25211

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 önüm

25171

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 önüm

25150

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 önüm

25182

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 önüm

25121

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

13 önüm

25219

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 önüm

25296

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

4 önüm

25077

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

27 önüm

25235

Cutting insert for internal square

Cutting insert for internal square. Designation: Cutting insert for internal square, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"pa

5 önüm

25130

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 önüm

25170

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 önüm

25174

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 önüm

25154

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 önüm

25113

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

22 önüm

25120

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

13 önüm

25135

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 önüm

25081

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

27 önüm

25239

Cutting insert for Torx

Cutting insert for Torx. Designation: Cutting insert for Torx, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","v

6 önüm

25073

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 önüm

25093

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

13 önüm

25163

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 önüm

25076

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

27 önüm

25108

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

22 önüm

25206

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 önüm

25089

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

30 önüm

25057

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 önüm

25158

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 önüm

25138

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 önüm

25072

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 önüm

25194

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 önüm

25166

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 önüm

25109

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

22 önüm

25096

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

13 önüm

25233

Cutting insert for internal square

Cutting insert for internal square. Designation: Cutting insert for internal square, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"

5 önüm

25131

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 önüm

25088

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

30 önüm

25147

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 önüm

25215

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 önüm

25159

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 önüm

25139

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 önüm

25199

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 önüm

25134

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 önüm

25061

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

51 önüm

25175

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 önüm

25146

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 önüm

25085

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 önüm

25056

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 önüm

25179

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 önüm

25097

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

13 önüm

25084

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 önüm

25503

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 önüm

25112

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

22 önüm

25210

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 önüm

25223

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

3 önüm

25198

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 önüm

25064

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

51 önüm

25092

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

13 önüm

25207

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 önüm

25143

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 önüm

26602

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

1 önüm

25650

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

2 önüm

25647

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

2 önüm

25142

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 önüm

27238

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 önüm

25506

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

2474

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 5.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

75 önüm

25641

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

2 önüm

25298

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

4 önüm

25734

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

25791

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 önüm

26601

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

2 önüm

25127

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 önüm

26604

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

1 önüm

25816

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

4 önüm

25648

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 önüm

27236

Cutting insert for axial grooving in holes, full radius slots

94 önüm

25677

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 önüm

25649

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 önüm

25739

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 önüm

25621

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 önüm

25622

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 önüm

27147

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 önüm

27290

Cutting insert for drilling into solid material and boring out Quattro Drill

Cutting insert for drilling into solid material and boring out Quattro Drill. Designation: Cutting insert for drilling into solid material and boring out Q

4 önüm

25636

Indexable insert for axial grooving, full radius slots

6 önüm

25630

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 önüm

25674

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 önüm

25643

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

2 önüm

27140

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

4 önüm

25799

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 önüm

27201

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

25639

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 önüm

25618

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 önüm

25811

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 önüm

25798

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 önüm

27135

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

6 önüm

25665

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 önüm

27244

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 önüm

25620

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 önüm

25670

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

4 önüm

27243

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 önüm

25862

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

7 önüm

25634

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 önüm

25879

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

25823

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

4 önüm

25795

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 önüm

25659

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 önüm

25069

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 önüm

27240

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 önüm

27148

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 önüm

27139

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 önüm

25675

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 önüm

27150

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 önüm

26603

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

1 önüm

27142

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

4 önüm

27210

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 önüm

27100

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

25655

Indexable insert for external partial profile threading

4 önüm

27117

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

27138

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 önüm

25642

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 önüm

25606

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 önüm

27124

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 önüm

26902

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 önüm

27120

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

25802

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 önüm

27229

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 önüm

27235

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 önüm

25601

Indexable insert for radial grooving external and internal

Indexable insert for radial grooving external and internal. Designation: Indexable insert for radial grooving external and internal, TABLE_INFO_PASSON: [{"

15 önüm

27211

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 önüm

27133

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

6 önüm

27205

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

27204

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

25846

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

27146

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

4 önüm

27116

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

25635

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 önüm

25830

Cutting insert for internal threading, part profile trapezoidal thread

Cutting insert for internal threading, part profile trapezoidal thread. Designation: Cutting insert for internal threading, part profile trapezoidal thread

6 önüm

25803

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 önüm

27137

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 önüm

27136

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 önüm

25663

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 önüm

25806

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 önüm

27134

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

6 önüm

26904

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 önüm

25603

Indexable insert for radial grooving external and internal

Indexable insert for radial grooving external and internal. Designation: Indexable insert for radial grooving external and internal, TABLE_INFO_PASSON: [{"

15 önüm

25676

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 önüm

25790

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 önüm

25155

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 önüm

27149

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 önüm

25767

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 önüm

25615

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 önüm

27123

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 önüm

27103

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 önüm

25679

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

27125

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 önüm

25607

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 önüm

25810

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 önüm

27104

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 önüm

27111

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 önüm

25783

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 önüm

27128

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 önüm

25068

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 önüm

25838

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

27234

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 önüm

25669

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

4 önüm

25628

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 önüm

27246

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 önüm

25878

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

25786

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 önüm

27109

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 önüm

27118

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 önüm

27110

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 önüm

27101

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

25510

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 önüm

25658

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 önüm

25819

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

4 önüm

27206

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 önüm

27228

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 önüm

25779

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 önüm

25667

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 önüm

27121

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

25774

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 önüm

26903

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 önüm

25738

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 önüm

25859

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

25614

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 önüm

25755

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

25794

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 önüm

25666

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 önüm

27218

Cutting insert for boring out and profiling

20 önüm

25898

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 önüm

25762

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 önüm

27105

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

25672

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

4 önüm

25719

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

36 önüm

25507

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

27108

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 önüm

25847

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

25656

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 önüm

25850

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 önüm

27227

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 önüm

25851

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 önüm

27207

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 önüm

25870

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

28 önüm

27102

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 önüm

25715

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 önüm

25706

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 önüm

25771

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 önüm

25613

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 önüm

25827

Cutting insert for internal threading, part profile trapezoidal thread

Cutting insert for internal threading, part profile trapezoidal thread. Designation: Cutting insert for internal threading, part profile trapezoidal thread

6 önüm

25754

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

27127

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 önüm

25707

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 önüm

27202

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 önüm

25750

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

27225

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 önüm

27224

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 önüm

25703

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

54 önüm

27222

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 önüm

25522

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 önüm

25623

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 önüm

25646

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

2 önüm

25883

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 önüm

25711

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 önüm

25060

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

51 önüm

25821

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

4 önüm

25631

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 önüm

27226

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 önüm

25894

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

25875

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

25855

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

27237

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 önüm

25511

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 önüm

25619

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 önüm

25502

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 önüm

25839

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

27242

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 önüm

25722

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

36 önüm

27247

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 önüm

25867

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

28 önüm

25751

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

25053

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

54 önüm

25714

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 önüm

25887

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 önüm

25723

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

36 önüm

27216

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

27217

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

27129

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 önüm

27130

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 önüm

25626

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 önüm

25518

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 önüm

26905

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 önüm

25657

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 önüm

27107

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 önüm

25519

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 önüm

25742

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

36 önüm

27106

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 önüm

27219

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 önüm

25842

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 önüm

25523

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 önüm

25758

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 önüm

25651

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

2 önüm

25835

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 önüm

25843

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 önüm

25770

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 önüm

27203

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 önüm

25514

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

25743

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

36 önüm

27119

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 önüm

25702

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

54 önüm

25866

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

28 önüm

25895

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

25854

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 önüm

27200

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

27220

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

25775

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 önüm

25759

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 önüm

27221

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

25678

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

6 önüm

27230

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 önüm

25605

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 önüm

25778

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 önüm

25718

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

36 önüm

26906

Cutting insert for drilling into solid material and boring out Quattro Drill

Cutting insert for drilling into solid material and boring out Quattro Drill. Designation: Cutting insert for drilling into solid material and boring out Q

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

25886

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 önüm

25871

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

28 önüm

25747

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

36 önüm

27151

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 önüm

25710

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 önüm

5029

Indexable insert for single-fluted gun drill EB 800

Indexable insert for single-fluted gun drill EB 800. Designation: Indexable insert for single-fluted gun drill EB 800, Diameter range: 25.000 - 25.499, TAB

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

132 önüm

1032

Step ratio drill, 3-fluted

Step ratio drill, 3-fluted. Designation: Step ratio drill, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

14 önüm

3798

Al slot drill (2-fluted) set

Al slot drill (2-fluted) set. Designation: Al slot drill (2-fluted) set, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

1 önüm

3303

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 önüm

3709

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 önüm

3860

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 2.000 mm – 8.000 mm, TABLE_INFO_PA

5 önüm

3686

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

22 önüm

4269

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_P

24 önüm

3859

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_P

7 önüm

19991

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

8 önüm

3677

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 önüm

3684

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 0.300 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

32 önüm

19963

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 önüm

3203

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

25 önüm

3676

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 önüm

19962

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

1 önüm

5574

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

22 önüm

5573

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

30 önüm

5030

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 25.000 - 25.499, T

400 önüm

5707

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 25.000 - 25.499, T

400 önüm

5703

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 50.000 - 50.499, T

400 önüm

5705

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 37.500 - 37.999, T

400 önüm

6013

90° front/back deburrer set

90° front/back deburrer set. Designation: 90° front/back deburrer set, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

2 önüm

513

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSO

110 önüm

1056

VBMX indexable insert

VBMX indexable insert. Designation: VBMX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 önüm

1009

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 önüm

1161

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 önüm

1008

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 önüm

1047

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

71 önüm

1861

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 önüm

1927

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 önüm

1859

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 önüm

1883

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 önüm

1972

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 önüm

1858

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 önüm

1860

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 önüm

2311

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 önüm

1931

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 önüm

1581

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

10 önüm

2464

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

199 önüm

2463

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

205 önüm

2507

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 önüm

2518

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 önüm

2506

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 önüm

2510

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 önüm

2516

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 önüm

2485

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

71 önüm

2601

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.170 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

98 önüm

4118

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 önüm

4181

CCHX indexable insert, external

CCHX indexable insert, external. Designation: CCHX indexable insert, external, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

2 önüm

2944

Machine tap for ISO metric threads

146 önüm

4025

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.500 mm – 25.650 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

91 önüm

2747

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

71 önüm

4113

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

152 önüm

4112

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

156 önüm

4599

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

4 önüm

4673

Machine tap for ISO metric threads

70 önüm

5593

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 önüm

6605

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 önüm

6602

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 önüm

6237

DCMT indexable insert

DCMT indexable insert. Designation: DCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 önüm

6272

CCMT indexable insert

CCMT indexable insert. Designation: CCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 önüm

6238

TCMT indexable insert

TCMT indexable insert. Designation: TCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

6239

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 önüm

6995

90° chamfering milling cutter set SpyroTec

90° chamfering milling cutter set SpyroTec. Designation: 90° chamfering milling cutter set SpyroTec, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr

1 önüm

6601

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 önüm

7654

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7652

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

4 önüm

7661

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

6994

90° chamfering milling cutter set SpyroTec

90° chamfering milling cutter set SpyroTec. Designation: 90° chamfering milling cutter set SpyroTec, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr

1 önüm

7636

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7650

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

4 önüm

7641

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 önüm

7640

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 önüm

7660

CCMT indexable insert

CCMT indexable insert. Designation: CCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 önüm

7647

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7632

CPGW indexable insert

CPGW indexable insert. Designation: CPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

5 önüm

7651

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

4 önüm

7711

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

2 önüm

724

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

12 önüm

736

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 6.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},

11 önüm

723

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"

13 önüm

7642

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 önüm

7658

CCMT indexable insert

CCMT indexable insert. Designation: CCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"at

6 önüm

7635

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 önüm

942

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 önüm

7648

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7656

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7639

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7634

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7657

CCGX indexable insert

CCGX indexable insert. Designation: CCGX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 önüm

6849

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 önüm

7638

TCGT indexable insert

TCGT indexable insert. Designation: TCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 önüm

7643

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 önüm

7653

TPGW indexable insert

TPGW indexable insert. Designation: TPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

7655

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

702

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.490 mm – 6.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

92 önüm

7637

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 önüm

7645

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

5 önüm

706

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.500 mm – 1.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 önüm

978

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 önüm

976

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 önüm

972

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 önüm

975

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 önüm

944

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 önüm

4128

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

12 önüm

3752

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

2 önüm

3751

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

4136

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 önüm

4135

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 önüm

3754

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 önüm

3768

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 önüm

4499

Micro thread milling cutter set for metric threads

Micro thread milling cutter set for metric threads. Designation: Micro thread milling cutter set for metric threads, Diameter range: M2 - M4, TABLE_INFO_PA

2 önüm

5547

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

4770

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 önüm

3744

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 önüm

3524

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 önüm

4130

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

6 önüm

3748

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

3770

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 önüm

4137

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 önüm

4162

External thread milling cutter for ISO metric threads

External thread milling cutter for ISO metric threads. Designation: External thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P",

9 önüm

3735

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

3772

Universal thread milling cutter for NPTF-threads

Universal thread milling cutter for NPTF-threads. Designation: Universal thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

2 önüm

4129

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

12 önüm

4133

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

3542

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 önüm

3769

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 önüm

3746

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

3771

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

1 önüm

3597

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

1 önüm

4134

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 önüm

3758

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 önüm

3753

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 önüm

3596

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

18 önüm

3740

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

3745

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

4780

Circular drill thread milling cutter for Whitworth pipe threads

Circular drill thread milling cutter for Whitworth pipe threads. Designation: Circular drill thread milling cutter for Whitworth pipe threads, TABLE_INFO_P

3 önüm

3750

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

4131

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 önüm

3756

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 önüm

4214

Micro thread milling cutter for MJ threads

Micro thread milling cutter for MJ threads. Designation: Micro thread milling cutter for MJ threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 önüm

3773

Universal thread milling cutter for NPTF-threads

Universal thread milling cutter for NPTF-threads. Designation: Universal thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

2 önüm

3557

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 önüm

3734

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

14 önüm

3755

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 önüm

4132

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

4700

Circular drill thread milling cutter for UNC and UNF threads

Circular drill thread milling cutter for UNC and UNF threads. Designation: Circular drill thread milling cutter for UNC and UNF threads, TABLE_INFO_PASSON:

23 önüm

3556

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 önüm

4226

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

14 önüm

4225

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

10 önüm

3541

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 önüm

3523

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 önüm

3757

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 önüm

4228

Micro thread milling cutter for BSP-threads

Micro thread milling cutter for BSP-threads. Designation: Micro thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

4 önüm

4215

Micro thread milling cutter for UNJC/UNJF- threads

Micro thread milling cutter for UNJC/UNJF- threads. Designation: Micro thread milling cutter for UNJC/UNJF- threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 önüm

3737

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

17 önüm

4001

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

14 önüm

3595

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

13 önüm

4163

External thread milling cutter for ISO metric threads

External thread milling cutter for ISO metric threads. Designation: External thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P",

12 önüm

4002

Circular drill thread milling cutter for metric ISO threads

Circular drill thread milling cutter for metric ISO threads. Designation: Circular drill thread milling cutter for metric ISO threads, TABLE_INFO_PASSON: [

16 önüm

4227

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

10 önüm

4223

Micro thread milling cutter for UNC/UNF threads

Micro thread milling cutter for UNC/UNF threads. Designation: Micro thread milling cutter for UNC/UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

23 önüm

3743

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

16 önüm

5548

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

4496

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 önüm

6486

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.35 - 12.7, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{

1 önüm

3209

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","va

7 önüm

19950

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

3598

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19951

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

3728

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 14.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val

2 önüm

3304

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

21 önüm

4372

Ratio end mill set RF 100 U (3-fluted cutter)

Ratio end mill set RF 100 U (3-fluted cutter). Designation: Ratio end mill set RF 100 U (3-fluted cutter), Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [

1 önüm

5582

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","va

5 önüm

6885

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

6834

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

11 önüm

6886

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

6845

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

12 önüm

6836

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 önüm

6853

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

11 önüm

6846

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

11 önüm

6844

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

12 önüm

6855

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

37 önüm

6852

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

17 önüm

4371

Ratio end mill set RF 100 INOX NF

Ratio end mill set RF 100 INOX NF. Designation: Ratio end mill set RF 100 INOX NF, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

1 önüm

4348

High-performance roughing end mill RS 100 F set

High-performance roughing end mill RS 100 F set. Designation: High-performance roughing end mill RS 100 F set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 önüm

3799

End mill (4-fluted) set

End mill (4-fluted) set. Designation: End mill (4-fluted) set, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

1 önüm

4347

High-performance roughing end mill RS 100 F set

High-performance roughing end mill RS 100 F set. Designation: High-performance roughing end mill RS 100 F set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 önüm

4370

Ratio end mill set RF 100 VA

Ratio end mill set RF 100 VA. Designation: Ratio end mill set RF 100 VA, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

1 önüm

6957

Ratio end mill set RF 100 5 Speed

Ratio end mill set RF 100 5 Speed. Designation: Ratio end mill set RF 100 5 Speed, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 önüm

4344

High-performance roughing end mill RS 100 U set

High-performance roughing end mill RS 100 U set. Designation: High-performance roughing end mill RS 100 U set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 önüm

6758

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 1/4 - 5/8, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

1 önüm

6755

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

2 önüm

6754

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 5.7 - 15.6, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

2 önüm

5645

Ratio end mill set RF 100 U

Ratio end mill set RF 100 U. Designation: Ratio end mill set RF 100 U, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

1 önüm

6483

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

4 önüm

6482

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

4 önüm

5634

Ratio end mill set RF 100 U

Ratio end mill set RF 100 U. Designation: Ratio end mill set RF 100 U, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

62 önüm

2472

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

156 önüm

2718

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 önüm

5611

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

147 önüm

5612

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

104 önüm

5614

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

142 önüm

8621

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

150 önüm

8611

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

150 önüm

8610

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

150 önüm

8620

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

148 önüm

1210

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 5.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

4 önüm

4386

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

6 önüm

4387

Spindle flange SK/HSK-C

Spindle flange SK/HSK-C. Designation: Spindle flange SK/HSK-C, Internal diameter: 128.57 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

4 önüm

4385

Spindle mounting flange HSK

Spindle mounting flange HSK. Designation: Spindle mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

11 önüm

4582

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

4 önüm

4665

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 1/4", Internal diameter: 15.88 mm, T

10 önüm

4581

Spindle attachment mounting flange HSK

Spindle attachment mounting flange HSK. Designation: Spindle attachment mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

7 önüm

4586

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

5 önüm

5019

Two-fluted gun drill ZB 80

Two-fluted gun drill ZB 80. Designation: Two-fluted gun drill ZB 80, Diameter range: 8.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

3 önüm

5643

Two-fluted gun drill ZB 80

Two-fluted gun drill ZB 80. Designation: Two-fluted gun drill ZB 80, Diameter range: 8.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

3 önüm

4363

Spindle attachment flange module 6x6 HSK

Spindle attachment flange module 6x6 HSK. Designation: Spindle attachment flange module 6x6 HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

6 önüm

4290

HSK-A hydro expansion chuck extra long

HSK-A hydro expansion chuck extra long. Designation: HSK-A hydro expansion chuck extra long, Internal diameter: 32.00 mm, TABLE_INFO_PASSON: [{"attr":"P","

6 önüm

4368

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 3.012 mm – 25.032 mm, Internal diame

28 önüm

4369

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 3.012 mm – 125.032 mm, Internal diam

82 önüm

4584

Spindle mounting flange HSK

Spindle mounting flange HSK. Designation: Spindle mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

6 önüm

4713

Spindle attachment flange module 4x4 HSK

Spindle attachment flange module 4x4 HSK. Designation: Spindle attachment flange module 4x4 HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

6 önüm

19971

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

4 önüm

3049

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 önüm

3024

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

11 önüm

19969

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 önüm

5533

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 4.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

6 önüm

25306

Square shank holder, 90° offset and stepped, with IC

Square shank holder, 90° offset and stepped, with IC. Designation: Square shank holder, 90° offset and stepped, with IC, TABLE_INFO_PASSON: [{"attr":"P","v

2 önüm

25312

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 önüm

25014

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 önüm

25020

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 önüm

25310

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

1 önüm

25003

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

7 önüm

25315

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 önüm

25015

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 önüm

25309

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 önüm

25303

Square shank holder, 90° offset and stepped without IC

Square shank holder, 90° offset and stepped without IC. Designation: Square shank holder, 90° offset and stepped without IC, TABLE_INFO_PASSON: [{"attr":"P

2 önüm

26103

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

17 önüm

25304

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 önüm

25004

Square shank holder, 90° offset and stepped without IC

Square shank holder, 90° offset and stepped without IC. Designation: Square shank holder, 90° offset and stepped without IC, TABLE_INFO_PASSON: [{"attr":"P

2 önüm

25010

Polygon shank holder, straight 0°

Polygon shank holder, straight 0°. Designation: Polygon shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

4 önüm

25363

Square shank holder, 45° offset, external machining without IC

Square shank holder, 45° offset, external machining without IC. Designation: Square shank holder, 45° offset, external machining without IC, TABLE_INFO_PAS

9 önüm

25364

Square shank holder, 45° offset, external machining with IC

Square shank holder, 45° offset, external machining with IC. Designation: Square shank holder, 45° offset, external machining with IC, TABLE_INFO_PASSON: [

8 önüm

25314

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 önüm

25011

HSK-T adaptor for tapping chucks

HSK-T adaptor for tapping chucks. Designation: HSK-T adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

1 önüm

25311

HSK-T adaptor for tapping chucks straight 0°

HSK-T adaptor for tapping chucks straight 0°. Designation: HSK-T adaptor for tapping chucks straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

2 önüm

25002

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

7 önüm

25013

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 önüm

25005

Square shank holder, 90° offset and stepped, with IC

Square shank holder, 90° offset and stepped, with IC. Designation: Square shank holder, 90° offset and stepped, with IC, TABLE_INFO_PASSON: [{"attr":"P","v

2 önüm

25372

Square shank holder straight, for external machining with adjustable IC

Square shank holder straight, for external machining with adjustable IC. Designation: Square shank holder straight, for external machining with adjustable

12 önüm

25313

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 önüm

25359

Square shank holder, 90° offset, external machining, with IC

Square shank holder, 90° offset, external machining, with IC. Designation: Square shank holder, 90° offset, external machining, with IC, TABLE_INFO_PASSON:

32 önüm

25365

Square shank holder, 45° offset, external machining with IC

Square shank holder, 45° offset, external machining with IC. Designation: Square shank holder, 45° offset, external machining with IC, TABLE_INFO_PASSON: [

8 önüm

25016

HSK-T adaptor for tapping chucks straight 0°

HSK-T adaptor for tapping chucks straight 0°. Designation: HSK-T adaptor for tapping chucks straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

2 önüm

25305

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 önüm

25353

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

32 önüm

25307

Polygon shank holder, straight 0°

Polygon shank holder, straight 0°. Designation: Polygon shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

4 önüm

25350

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

36 önüm

25357

Square shank holder, 90° offset, external machining, without IC

Square shank holder, 90° offset, external machining, without IC. Designation: Square shank holder, 90° offset, external machining, without IC, TABLE_INFO_P

36 önüm

25019

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 önüm

26101

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

17 önüm

25373

Square shank holder straight, for external machining with adjustable IC

Square shank holder straight, for external machining with adjustable IC. Designation: Square shank holder straight, for external machining with adjustable

12 önüm

25356

Square shank holder, 90° offset, external machining, without IC

Square shank holder, 90° offset, external machining, without IC. Designation: Square shank holder, 90° offset, external machining, without IC, TABLE_INFO_P

36 önüm

25308

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 önüm

25362

Square shank holder, 45° offset, external machining without IC

Square shank holder, 45° offset, external machining without IC. Designation: Square shank holder, 45° offset, external machining without IC, TABLE_INFO_PAS

9 önüm

26100

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

17 önüm

25012

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 önüm

26102

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

17 önüm

25352

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

32 önüm

25358

Square shank holder, 90° offset, external machining, with IC

Square shank holder, 90° offset, external machining, with IC. Designation: Square shank holder, 90° offset, external machining, with IC, TABLE_INFO_PASSON:

32 önüm

25351

Square shank holder, straight, external machining without IC

6 önüm

27052

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 önüm

27009

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 önüm

4050

MQL mounting adapter set

MQL mounting adapter set. Designation: MQL mounting adapter set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{

2 önüm

4038

Clamping force proofing instrument Senso 3000

Clamping force proofing instrument Senso 3000. Designation: Clamping force proofing instrument Senso 3000, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

10 önüm

27007

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 önüm

27008

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 önüm

27055

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 önüm

4237

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 45.500 mm, Internal diameter: 14.29 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

16 önüm

4235

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 10.000 mm – 45.500 mm, Internal diameter: 2.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

26 önüm

4335

Sealing washer

Sealing washer. Designation: Sealing washer, Internal diameter: 13.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","va

144 önüm

4236

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 45.500 mm, Internal diameter: 3.17 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

20 önüm

4302

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 10.000 mm – 45.500 mm, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

38 önüm

4212

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 39.000 mm, Internal diameter: 15.88 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

4 önüm

4973

Clamping force measuring instrument

Clamping force measuring instrument. Designation: Clamping force measuring instrument, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 önüm

4715

Angle alignment unit

Angle alignment unit. Designation: Angle alignment unit, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

2 önüm

4974

Clamping force measuring instrument

Clamping force measuring instrument. Designation: Clamping force measuring instrument, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 önüm

4970

ISO taper proofing bar SK

ISO taper proofing bar SK. Designation: ISO taper proofing bar SK, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val

2 önüm

4716

Intermediate sleeve with sealing lip

Intermediate sleeve with sealing lip. Designation: Intermediate sleeve with sealing lip, Diameter range: 14.010 mm – 238.080 mm, TABLE_INFO_PASSON: [{"attr

16 önüm

4971

HSK proofing bar

HSK proofing bar. Designation: HSK proofing bar, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

7 önüm

5772

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 3.600 - 4.399, Internal diameter: 6.

24 önüm

5770

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 24.610 - 25.609, TABLE_INFO_PASSON:

86 önüm

5752

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 2.500 - 2.599, TABLE_INFO_PASSON: [{

113 önüm

5753

Sealing washer for two-fluted drills

Sealing washer for two-fluted drills. Designation: Sealing washer for two-fluted drills, Diameter range: 17.400 - 17.899, TABLE_INFO_PASSON: [{"attr":"P","

80 önüm

4722

Hydro expansion chuck flange module 6x6

Hydro expansion chuck flange module 6x6. Designation: Hydro expansion chuck flange module 6x6, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

4 önüm

4360

Hydro expansion chuck flange module 4x4

Hydro expansion chuck flange module 4x4. Designation: Hydro expansion chuck flange module 4x4, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

4 önüm

4714

HPC clamping chuck flange module 6x6

HPC clamping chuck flange module 6x6. Designation: HPC clamping chuck flange module 6x6, Diameter range: 20 - 32, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

4 önüm

4760

Shrink fit chuck flange module 4x4

Shrink fit chuck flange module 4x4. Designation: Shrink fit chuck flange module 4x4, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

11 önüm

4717

Shrink fit chuck flange module 6x6

Shrink fit chuck flange module 6x6. Designation: Shrink fit chuck flange module 6x6, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

11 önüm

4723

Alignment adapter HSK-A module 6x6

Alignment adapter HSK-A module 6x6. Designation: Alignment adapter HSK-A module 6x6, Internal diameter: 80.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

15 önüm

4724

Alignment adapter SK module 4x4

Alignment adapter SK module 4x4. Designation: Alignment adapter SK module 4x4, Internal diameter: 35.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

10 önüm

4725

Alignment adapter SK module 6x6

Alignment adapter SK module 6x6. Designation: Alignment adapter SK module 6x6, Internal diameter: 50.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

10 önüm

4297

Alignment adapter HSK-A module 4x4

Alignment adapter HSK-A module 4x4. Designation: Alignment adapter HSK-A module 4x4, Internal diameter: 40.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

15 önüm

4709

Alignment adapter BT module 4x4

Alignment adapter BT module 4x4. Designation: Alignment adapter BT module 4x4, Internal diameter: 60.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

12 önüm

4712

Alignment adapter BT module 6x6

Alignment adapter BT module 6x6. Designation: Alignment adapter BT module 6x6, Internal diameter: 35.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

12 önüm

5513

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

45 önüm

6070

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

66 önüm

6068

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

75 önüm

6069

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

67 önüm

770

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

70 önüm

769

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

66 önüm

768

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

112 önüm

5651

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

140 önüm

5650

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

141 önüm

6026

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

189 önüm

6025

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 önüm

6023

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

206 önüm

6024

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 önüm

19989

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 önüm

19987

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 önüm

3730

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 önüm

19993

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 önüm

3059

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 önüm

19995

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

10 önüm

19983

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 önüm

19997

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

10 önüm

3296

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 önüm

3294

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

3297

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

19 önüm

19985

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

3719

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 önüm

3286

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

15 önüm

3295

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

30 önüm

3634

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

12 önüm

3720

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 önüm

3126

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 önüm

3154

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

30 önüm

3729

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 önüm

5543

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 önüm

5542

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

11 önüm

5531

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 önüm

5546

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 önüm

5502

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

13 önüm

5530

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 önüm

4096

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 4.010 mm – 16.020 mm, Internal diameter: 14.00 m

8 önüm

4097

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 4.010 mm – 8.010 mm, Internal diameter: 4.00 mm,

3 önüm

4095

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 14.020 mm – 25.032 mm, Internal diameter: 20.00

7 önüm

1438

Arbor, complete

Arbor, complete. Designation: Arbor, complete, Diameter range: 13.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

8 önüm

26201

Parting off blade with IC

Parting off blade with IC. Designation: Parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"}

4 önüm

26200

Parting off blade without IC

Parting off blade without IC. Designation: Parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

4 önüm

4312

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, Diameter range: 32 mm – 32 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

1 önüm

4316

HSK-C driving key

HSK-C driving key. Designation: HSK-C driving key, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

2 önüm

4319

SK driving key

SK driving key. Designation: SK driving key, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

7 önüm

4315

SK driving key

SK driving key. Designation: SK driving key, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

11 önüm

4355

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, Diameter range: 32 mm – 80 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

11 önüm

4975

Balancing masters

Balancing masters. Designation: Balancing masters, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

7 önüm

4991

Interchangeable disc

Interchangeable disc. Designation: Interchangeable disc, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

8 önüm

Empty case

Empty case. Designation: Empty case, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

5 önüm

4354

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 önüm

4955

RFID data carrier

RFID data carrier. Designation: RFID data carrier, Diameter range: 10.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

3 önüm

1434

Arbor without accessories

Arbor without accessories. Designation: Arbor without accessories, Diameter range: 16.000 mm – 45.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

7 önüm

4168

Without internal cooling

Without internal cooling. TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val"

4 önüm

773

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 5.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

8 önüm

3044

GF 200 B ball nose profile cutter

GF 200 B ball nose profile cutter. Designation: GF 200 B ball nose profile cutter, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 önüm

3679

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

17 önüm

3308

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

17 önüm

3030

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

7 önüm

19968

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 önüm

3014

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

7 önüm

3045

GF 200 B ball nose profile cutter

GF 200 B ball nose profile cutter. Designation: GF 200 B ball nose profile cutter, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

19970

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

7 önüm

3359

Ball nose hard profile cutter GF 300 B

8 önüm

6106

Locking disc

Locking disc. Designation: Locking disc, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

2 önüm

Plastic stand only

Plastic stand only. Designation: Plastic stand only, Diameter range: 1/16 - 1/2, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 önüm

1040

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 41.000 mm – 90.000 mm, Internal diameter: 6.00 mm, TABLE

24 önüm

1041

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 41.000 mm – 76.000 mm, Internal diameter: 6.00 mm, TABLE

24 önüm

4003

Adapter CAT to HSK-C

Adapter CAT to HSK-C. Designation: Adapter CAT to HSK-C, Diameter range: 63 mm – 63 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{

2 önüm

4076

Coolant supply measuring instrument CC 3000

Coolant supply measuring instrument CC 3000. Designation: Coolant supply measuring instrument CC 3000, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

1 önüm

4510

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, Diameter range: 63 mm – 100 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

5 önüm

4068

Flow rate measuring device PQ 3000

Flow rate measuring device PQ 3000. Designation: Flow rate measuring device PQ 3000, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

1 önüm

4512

SK / HSK-C adaptor for tapping chucks

SK / HSK-C adaptor for tapping chucks. Designation: SK / HSK-C adaptor for tapping chucks, Diameter range: 32 mm – 100 mm, TABLE_INFO_PASSON: [{"attr":"P",

10 önüm

4514

MAS/BT / HSK-C adaptor for tapping chucks

MAS/BT / HSK-C adaptor for tapping chucks. Designation: MAS/BT / HSK-C adaptor for tapping chucks, Diameter range: 40 mm – 63 mm, TABLE_INFO_PASSON: [{"att

6 önüm

4746

Cable hoist

Cable hoist. Designation: Cable hoist, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"at

1 önüm

4616

Adapter for M contour clamping sets

Adapter for M contour clamping sets. Designation: Adapter for M contour clamping sets, Diameter range: 8 mm – 11 mm, Internal diameter: 6.00 mm, TABLE_INFO

6 önüm

4968

Taper measuring gauge for HSK shank

Taper measuring gauge for HSK shank. Designation: Taper measuring gauge for HSK shank, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 önüm

4936

Adapter for M contour clamping sets

Adapter for M contour clamping sets. Designation: Adapter for M contour clamping sets, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 önüm

4948

HSK-A Mounting adapter

HSK-A Mounting adapter. Designation: HSK-A Mounting adapter, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"att

6 önüm

4922

Driver set

Driver set. Designation: Driver set, Diameter range: 16.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","

6 önüm

4978

Measuring gauge for HSK clamping shoulders

Measuring gauge for HSK clamping shoulders. Designation: Measuring gauge for HSK clamping shoulders, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

7 önüm

4769

Stop disc

Stop disc. Designation: Stop disc, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

8 önüm

4934

Adapter for MQL clamping sets

Adapter for MQL clamping sets. Designation: Adapter for MQL clamping sets, Diameter range: 4 mm – 12 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

17 önüm

4969

Measuring gauge for HSK spindles

Measuring gauge for HSK spindles. Designation: Measuring gauge for HSK spindles, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 önüm

4116

Floating holder with ER collet chuck holder

Floating holder with ER collet chuck holder. Designation: Floating holder with ER collet chuck holder, Diameter range: 3 - 20, TABLE_INFO_PASSON: [{"attr":

5 önüm

4117

Floating side lock holder

Floating side lock holder. Designation: Floating side lock holder, Diameter range: 16 - 25, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 önüm

1659

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 önüm

1673

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

60 önüm

1663

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

134 önüm

1662

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

141 önüm

1661

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 21.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

112 önüm

1660

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

135 önüm

2475

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

20 önüm

2478

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

40 önüm

2480

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

159 önüm

2479

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 2.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

202 önüm

2477

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

204 önüm

2712

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

18 önüm

2939

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PAS

25 önüm

2717

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

27 önüm

2713

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

72 önüm

2996

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 2.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

160 önüm

2711

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

106 önüm

4044

Ratio drill with coolant ducts

163 önüm

5580

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 önüm

5514

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

189 önüm

5512

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

156 önüm

5714

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

155 önüm

6596

Pilot drill with coolant ducts

Pilot drill with coolant ducts. Designation: Pilot drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

205 önüm

8521

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

155 önüm

5510 SHOPT 20260821

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 3.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 önüm

3680

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 önüm

3558

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 önüm

19982

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

19996

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

12 önüm

3314

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 önüm

3310

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 önüm

3633

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 önüm

19990

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

11 önüm

3196

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

21 önüm

3194

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 önüm

19994

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

12 önüm

19984

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

19986

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 önüm

3361

Hard profile cutter with Torus grind GF 300 T

Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO

28 önüm

3021

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

13 önüm

19988

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

15 önüm

3560

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

31 önüm

3362

Hard profile cutter with Torus grind GF 300 T

Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO

36 önüm

3358

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 5.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

6 önüm

3856

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_P

26 önüm

3309

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

13 önüm

3635

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 önüm

3011

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

13 önüm

3540

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 önüm

19992

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

11 önüm

3555

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 önüm

3193

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 önüm

3636

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

21 önüm

3559

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

20 önüm

3106

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

20 önüm

3367

Slot drill GA 200 A (3-fluted)

Slot drill GA 200 A (3-fluted). Designation: Slot drill GA 200 A (3-fluted), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

18 önüm

3195

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

33 önüm

3561

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

32 önüm

5507

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 önüm

5743

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 önüm

5730

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 önüm

6722

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [

8 önüm

5549

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

11 önüm

4268

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_P

24 önüm

5506

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 önüm

6721

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 önüm

5505

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 önüm

3396

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 önüm

5579

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 önüm

546

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

8 önüm

5649

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

7 önüm

6012

60° Chamfering milling cutter

60° Chamfering milling cutter. Designation: 60° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 önüm

6029

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 önüm

6028

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

13 önüm

6015

120° Chamfering milling cutter

120° Chamfering milling cutter. Designation: 120° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

4 önüm

6027

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 önüm

6715

120° Chamfering milling cutter

120° Chamfering milling cutter. Designation: 120° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 önüm

6811

60° Chamfering milling cutter SpyroTec

60° Chamfering milling cutter SpyroTec. Designation: 60° Chamfering milling cutter SpyroTec, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

6 önüm

3766

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

3533

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

3760

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 önüm

3538

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

3539

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

3 önüm

3544

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 önüm

3529

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

3546

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 önüm

3543

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 önüm

3545

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 önüm

4000

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

20 önüm

3366

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

6 önüm

3693

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 önüm

3894

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PAS

8 önüm

3522

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

3469

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

3896

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

6 önüm

3127

Roughing end mill GS 100 A (coarse teeth)

Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON:

9 önüm

3807

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

6 önüm

19941

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

3364

Roughing end mill GS 100 A (coarse teeth)

10 önüm

3885

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

5 önüm

3019

End mill

End mill. Designation: End mill, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 önüm

19977

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 önüm

3200

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 önüm

3508

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

19973

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 önüm

19975

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 önüm

3204

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"at

11 önüm

3721

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 önüm

3718

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

19965

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 önüm

3026

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 önüm

3892

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

21 önüm

3499

Ratio end mill RF 100 Ti

Ratio end mill RF 100 Ti. Designation: Ratio end mill RF 100 Ti, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

48 önüm

19981

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

3898

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 önüm

3298

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 önüm

3873

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

22 önüm

3871

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

19979

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 önüm

3805

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 önüm

3285

End mill

End mill. Designation: End mill, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

14 önüm

3722

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 önüm

19967

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 önüm

3630

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 önüm

3731

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 önüm

3632

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

6 önüm

3047

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 önüm

3201

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 önüm

3313

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

3803

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

22 önüm

3890

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 önüm

3299

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 önüm

3471

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

5583

Hard roughing end mill GS 100 H (fine teeth)

Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_P

6 önüm

6731

Ratio end mill RF 100 AL

9 önüm

6882

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 önüm

6702

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 önüm

6727

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

5 önüm

6890

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 önüm

6479

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 önüm

6726

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

6884

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

5655

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 önüm

6869

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

7 önüm

6703

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

5532

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 önüm

6733

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

5504

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

8 önüm

6871

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

6888

High-performance roughing end mill RS 100 U

High-performance roughing end mill RS 100 U. Designation: High-performance roughing end mill RS 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 önüm

6798

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

21 önüm

5544

Roughing end mill (3-fluted)

Roughing end mill (3-fluted). Designation: Roughing end mill (3-fluted), Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

5 önüm

6861

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

24 önüm

5535

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 önüm

6804

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

19 önüm

5584

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 önüm

5654

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

6735

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

6802

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

7 önüm

6467

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

6708

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 önüm

6800

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"at

5 önüm

5534

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 önüm

6729

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

27 önüm

6760

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 önüm

6465

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

6710

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

9 önüm

6768

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 önüm

6728

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

8 önüm

6878

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

12 önüm

6481

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 önüm

5545

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

8 önüm

6959

Ratio end mill RF 100 Speed P

Ratio end mill RF 100 Speed P. Designation: Ratio end mill RF 100 Speed P, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

6781

Ratio end mill set RF 100 Speed

Ratio end mill set RF 100 Speed. Designation: Ratio end mill set RF 100 Speed, Diameter range: 6.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

5 önüm

6971

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

25024

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 önüm

25321

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 önüm

25302

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 önüm

25006

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 önüm

25369

Round shank holder, internal machining without IC

Round shank holder, internal machining without IC. Designation: Round shank holder, internal machining without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-

24 önüm

25370

Round shank holder, internal machining with IC

Round shank holder, internal machining with IC. Designation: Round shank holder, internal machining with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

24 önüm

25371

Round shank holder, internal machining with IC

Round shank holder, internal machining with IC. Designation: Round shank holder, internal machining with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

24 önüm

25368

Round shank holder, internal machining without IC

Round shank holder, internal machining without IC. Designation: Round shank holder, internal machining without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-

24 önüm

27015

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 önüm

27016

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 önüm

27056

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 önüm

4718

Driving key

Driving key. Designation: Driving key, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"}

29 önüm

1946

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.600 mm – 14.100 mm, TABLE_INFO_PASSO

20 önüm

5578

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 4.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

17 önüm

6788

Quadrant milling cutter

Quadrant milling cutter. Designation: Quadrant milling cutter, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

12 önüm

6992

90° Chamfering milling cutter SpyroTec

90° Chamfering milling cutter SpyroTec. Designation: 90° Chamfering milling cutter SpyroTec, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

6 önüm

6817

Ball nose end mill G-Mold µ 65 B

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19 önüm

6737

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

16 önüm

6818

Ball nose end mill G-Mold µ 65 B

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19 önüm

3520

Thread milling cutter for NPT-threads

8 önüm

3526

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 önüm

3796

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

8 önüm

3778

Drill thread milling cutter for ISO metric threads

Drill thread milling cutter for ISO metric threads. Designation: Drill thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

9 önüm

3525

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 önüm

3791

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

8 önüm

3512

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 önüm

3794

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

8 önüm

3789

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

9 önüm

3790

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

10 önüm

3513

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 önüm

3767

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

3764

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

8 önüm

3528

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 önüm

3779

Drill thread milling cutter for ISO metric threads

Drill thread milling cutter for ISO metric threads. Designation: Drill thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

8 önüm

3784

Drill thread milling cutter for ISO metric threads

Drill thread milling cutter for ISO metric threads. Designation: Drill thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

9 önüm

3553

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 önüm

3780

Drill thread milling cutter for ISO metric threads

Drill thread milling cutter for ISO metric threads. Designation: Drill thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

9 önüm

3510

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 önüm

3762

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 önüm

3761

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 önüm

3793

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

9 önüm

3788

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

11 önüm

3759

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

Drill thread milling cutter for ISO metric threads. Designation: Drill thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

8 önüm

3018

Ball nose end mill

Ball nose end mill. Designation: Ball nose end mill, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

5 önüm

3897

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 önüm

3895

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

6 önüm

3363

Hard multi-tooth end mill corner radius GH 100 H

Hard multi-tooth end mill corner radius GH 100 H. Designation: Hard multi-tooth end mill corner radius GH 100 H, Diameter range: 6.000 mm – 16.000 mm, TABL

5 önüm

19966

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 önüm

3507

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 önüm

3893

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PAS

8 önüm

3889

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

8 önüm

3727

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 önüm

3473

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

3800

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

22 önüm

19978

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

15 önüm

3202

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 önüm

3509

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

19972

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

11 önüm

3637

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 önüm

3733

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

5 önüm

3839

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

19974

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 önüm

3470

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

3629

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 önüm

3198

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 önüm

3472

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 önüm

3017

Ball nose end mill

Ball nose end mill. Designation: Ball nose end mill, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

5 önüm

3312

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

3689

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

14 önüm

3012

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

13 önüm

3197

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

18 önüm

3716

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

6 önüm

19964

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 önüm

3649

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

18 önüm

3468

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 önüm

19976

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 önüm

3306

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 önüm

3599

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

27 önüm

3311

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

14 önüm

3837

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

3015

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 önüm

3691

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

3112

End mill with corner radius

End mill with corner radius. Designation: End mill with corner radius, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

22 önüm

3736

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

12 önüm

3208

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 önüm

3804

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 önüm

19980

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

3043

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 önüm

3891

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

21 önüm

3563

Multi-tooth end mill with corner radius GH 100 U

Multi-tooth end mill with corner radius GH 100 U. Designation: Multi-tooth end mill with corner radius GH 100 U, Diameter range: 3.000 mm – 20.000 mm, TABL

31 önüm

3872

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

22 önüm

19940

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 önüm

3806

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

6 önüm

3562

End mill with corner radius (4-fluted)

End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

34 önüm

3715

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

13 önüm

3631

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

6 önüm

3887

High-performance roughing end mill RS 100 U

High-performance roughing end mill RS 100 U. Designation: High-performance roughing end mill RS 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 önüm

3696

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

3498

Ratio end mill RF 100 Ti

Ratio end mill RF 100 Ti. Designation: Ratio end mill RF 100 Ti, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

48 önüm

3111

End mill with corner radius (4-fluted)

End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

22 önüm

3023

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

13 önüm

6464

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

6881

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 önüm

5653

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 önüm

6799

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"at

5 önüm

6833

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

12 önüm

6847

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

10 önüm

6870

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

6806

Kevlar end mill FR 100

Kevlar end mill FR 100. Designation: Kevlar end mill FR 100, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

12 önüm

6856

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 önüm

6734

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

6770

Kevlar end mill FR 100

Kevlar end mill FR 100. Designation: Kevlar end mill FR 100, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

14 önüm

6814

High-feed end mill G-Mold 65 HF

High-feed end mill G-Mold 65 HF. Designation: High-feed end mill G-Mold 65 HF, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 önüm

6835

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 önüm

6858

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 önüm

6725

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

7 önüm

6805

Kevlar end mill FR 100

Kevlar end mill FR 100. Designation: Kevlar end mill FR 100, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

12 önüm

6801

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

7 önüm

6719

Kevlar end mill CR 100

Kevlar end mill CR 100. Designation: Kevlar end mill CR 100, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

6 önüm

6866

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

5 önüm

6720

Kevlar end mill CR 100

Kevlar end mill CR 100. Designation: Kevlar end mill CR 100, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

6 önüm

6463

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

5 önüm

6717

Kevlar end mill CR 100

Kevlar end mill CR 100. Designation: Kevlar end mill CR 100, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

6 önüm

5556

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 önüm

6730

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 önüm

6879

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

6772

HSC end mills High Feed HF 300

HSC end mills High Feed HF 300. Designation: HSC end mills High Feed HF 300, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

8 önüm

6877

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

12 önüm

6827

Finishing end mill G-Mold μ 65 F

Finishing end mill G-Mold μ 65 F. Designation: Finishing end mill G-Mold μ 65 F, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 önüm

6797

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 önüm

6764

Ratio end mill RF 100 F 90°

Ratio end mill RF 100 F 90°. Designation: Ratio end mill RF 100 F 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 önüm

6466

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

5729

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 önüm

6867

Ratio end mill RF 100 Skyliner

Ratio end mill RF 100 Skyliner. Designation: Ratio end mill RF 100 Skyliner, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

7 önüm

6478

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

14 önüm

6821

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 önüm

6851

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

38 önüm

6868

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

7 önüm

6860

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

24 önüm

6716

Pilot end mill RF 100 P

Pilot end mill RF 100 P. Designation: Pilot end mill RF 100 P, Diameter range: 1.400 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

24 önüm

6723

End mill with corner radius (4-fluted)

End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

8 önüm

6709

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

9 önüm

6706

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 önüm

6824

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partia

31 önüm

6766

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 önüm

6838

Torus end mill G-Mold 65 T

Torus end mill G-Mold 65 T. Designation: Torus end mill G-Mold 65 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

37 önüm

6832

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

12 önüm

6822

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 önüm

6837

Torus end mill G-Mold 65 T

Torus end mill G-Mold 65 T. Designation: Torus end mill G-Mold 65 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

37 önüm

6765

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 önüm

6864

Ratio end mill RF 100 7 Speed

Ratio end mill RF 100 7 Speed. Designation: Ratio end mill RF 100 7 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 önüm

6732

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 önüm

6887

High-performance roughing end mill RS 100 U

High-performance roughing end mill RS 100 U. Designation: High-performance roughing end mill RS 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 önüm

6854

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

37 önüm

4270

Hard multi-tooth end mill corner radius GH 100 H

Hard multi-tooth end mill corner radius GH 100 H. Designation: Hard multi-tooth end mill corner radius GH 100 H, Diameter range: 3.000 mm – 16.000 mm, TABL

16 önüm

6803

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

19 önüm

6793

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 2.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 önüm

6850

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

38 önüm

6820

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 önüm

5735

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 önüm

6823

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 önüm

6831

High-feed end mill G-Mold 65 HF

High-feed end mill G-Mold 65 HF. Designation: High-feed end mill G-Mold 65 HF, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 önüm

8137

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 önüm

6948

Finishing end mill with corner radius G-Mold 65 FR

Finishing end mill with corner radius G-Mold 65 FR. Designation: Finishing end mill with corner radius G-Mold 65 FR, Diameter range: 3.000 mm – 16.000 mm,

8 önüm

8234

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 önüm

6974

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

6960

Ratio end mill RF 100 Speed P

Ratio end mill RF 100 Speed P. Designation: Ratio end mill RF 100 Speed P, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

6937

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 önüm

8136

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 önüm

8070

Micro-precision milling cutter RF 100 AL

Micro-precision milling cutter RF 100 AL. Designation: Micro-precision milling cutter RF 100 AL, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{

19 önüm

6777

Ratio end mill set RF 100 Speed

Ratio end mill set RF 100 Speed. Designation: Ratio end mill set RF 100 Speed, Diameter range: 6.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

5 önüm

8230

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

21 önüm

8069

Micro-precision milling cutter RF 100 AL

Micro-precision milling cutter RF 100 AL. Designation: Micro-precision milling cutter RF 100 AL, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{

19 önüm

6936

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 önüm

6972

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

6980

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 önüm

8248

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

38 önüm

6976

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 önüm

6935

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 önüm

6945

Finishing end mill G-Mold 65 F

Finishing end mill G-Mold 65 F. Designation: Finishing end mill G-Mold 65 F, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 önüm

6970

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 önüm

8066

Micro-precision milling cutter RF 100 AL

Micro-precision milling cutter RF 100 AL. Designation: Micro-precision milling cutter RF 100 AL, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{

30 önüm

6966

Ratio end mill RF 100 Ti

Ratio end mill RF 100 Ti. Designation: Ratio end mill RF 100 Ti, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

48 önüm

8138

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 2.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 önüm

6943

Ratio end mill G-Mold 65 U

Ratio end mill G-Mold 65 U. Designation: Ratio end mill G-Mold 65 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

9 önüm

8256

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

47 önüm

8232

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

21 önüm

6978

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 önüm

8254

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

47 önüm

6958

Ratio end mill RF 100 Speed P

Ratio end mill RF 100 Speed P. Designation: Ratio end mill RF 100 Speed P, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 önüm

6947

Finishing end mill with corner radius G-Mold 65 FR

Finishing end mill with corner radius G-Mold 65 FR. Designation: Finishing end mill with corner radius G-Mold 65 FR, Diameter range: 3.000 mm – 16.000 mm,

23 önüm

6962

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

44 önüm

6964

Ratio end mill RF 100 iMill

Ratio end mill RF 100 iMill. Designation: Ratio end mill RF 100 iMill, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial

44 önüm

8236

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

21 önüm

6982

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

22 önüm

6946

Finishing end mill G-Mold 65 F

Finishing end mill G-Mold 65 F. Designation: Finishing end mill G-Mold 65 F, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 önüm

8238

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

21 önüm

8135

End mill (single-fluted)

End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 önüm

8252

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

50 önüm

6778

Ratio end mill set RF 100 Speed M

Ratio end mill set RF 100 Speed M. Designation: Ratio end mill set RF 100 Speed M, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

7 önüm

8240

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

20 önüm

8246

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

50 önüm

8250

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

50 önüm

8242

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

20 önüm

8244

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

50 önüm

8065

Micro-precision milling cutter RF 100 AL

Micro-precision milling cutter RF 100 AL. Designation: Micro-precision milling cutter RF 100 AL, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{

30 önüm

4098

Floating holder with ER collet chuck holder

Floating holder with ER collet chuck holder. Designation: Floating holder with ER collet chuck holder, Diameter range: 2 - 16, Internal diameter: 20.00 mm,

6 önüm

4169

Floating side lock holder

Floating side lock holder. Designation: Floating side lock holder, Diameter range: 12 - 20, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

3 önüm

4174

Floating side lock holder

Floating side lock holder. Designation: Floating side lock holder, Diameter range: 4 - 10, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","va

1 önüm

4167

Floating side lock holder

Floating side lock holder. Designation: Floating side lock holder, Diameter range: 16 - 25, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

3 önüm

3574

Dovetail cutters

Dovetail cutters. Designation: Dovetail cutters, Diameter range: 16.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

4 önüm

3576

Dovetail cutters

Dovetail cutters. Designation: Dovetail cutters, Diameter range: 16.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

4 önüm

3577

Dovetail cutters

Dovetail cutters. Designation: Dovetail cutters, Diameter range: 16.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

4 önüm

3572

Dovetail cutters

Dovetail cutters. Designation: Dovetail cutters, Diameter range: 16.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

4 önüm

125

Dies for ISO metric threads

Dies for ISO metric threads. Designation: Dies for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

7 önüm

121

Dies for ISO metric threads

Dies for ISO metric threads. Designation: Dies for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 önüm

181

Dies for UNC threads

Dies for UNC threads. Designation: Dies for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"a

1 önüm

185

Dies for UNF threads

Dies for UNF threads. Designation: Dies for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"a

10 önüm

171

Dies for BSW threads

Dies for BSW threads. Designation: Dies for BSW threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

1 önüm

140

Dies for ISO metric threads

Dies for ISO metric threads. Designation: Dies for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

Dies for ISO metric fine threads. Designation: Dies for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

52 önüm

176

Dies for BSP threads

Dies for BSP threads. Designation: Dies for BSP threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"a

11 önüm

1433

Hand taper reamer

Hand taper reamer. Designation: Hand taper reamer, Diameter range: 3.000 mm – 23.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

5 önüm

428

Hand taper reamer

Hand taper reamer. Designation: Hand taper reamer, Diameter range: 2.500 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

2 önüm

414

Bridge reamer

Bridge reamer. Designation: Bridge reamer, Diameter range: 6.400 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

29 önüm

429

Hand taper reamer

Hand taper reamer. Designation: Hand taper reamer, Diameter range: 1.200 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

23 önüm

412

Hand reamer

Hand reamer. Designation: Hand reamer, Diameter range: 1.000 mm – 49.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

53 önüm

416

Expanding hand reamer

Expanding hand reamer. Designation: Expanding hand reamer, Diameter range: 24.00 - 27.50, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"

19 önüm

413

Hand reamer

Hand reamer. Designation: Hand reamer, Diameter range: 1.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

67 önüm

415

Adjustable hand reamer

Adjustable hand reamer. Designation: Adjustable hand reamer, Diameter range: 4.000 mm – 59.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

56 önüm

1682

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 6.000 mm – 40.000 mm, Internal diameter: 4.20 mm, TABLE_

19 önüm

1683

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 6.000 mm – 40.000 mm, Internal diameter: 2.00 mm, TABLE_

19 önüm

131

Dies for ISO metric fine threads

96 önüm

6020

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 12.030 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

75 önüm

6019

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

28 önüm

4364

Length adjustment screw for hydraulic synchro tapping chucks

Length adjustment screw for hydraulic synchro tapping chucks. Designation: Length adjustment screw for hydraulic synchro tapping chucks, Internal diameter:

17 önüm

301

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.050 mm – 1.950 mm, TABLE_INFO_PA

231 önüm

646

Straight shank core drill

Straight shank core drill. Designation: Straight shank core drill, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"}

2 önüm

660

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.160 mm – 1.900 mm, TABLE_INFO_PA

111 önüm

1681

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 6.000 mm – 40.000 mm, Internal diameter: 5.00 mm, TABLE_

11 önüm

1680

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 6.000 mm – 40.000 mm, Internal diameter: 5.00 mm, TABLE_

11 önüm

1036

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

18 önüm

1037

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

18 önüm

1678

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 önüm

1449

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

91 önüm

1679

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 önüm

1427

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 0.980 mm – 12.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

80 önüm

4103

Deburring reamer

Deburring reamer. Designation: Deburring reamer, Diameter range: 4.00 - 4.49, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"att

7 önüm

5527

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 0.970 mm – 12.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

80 önüm

6016

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

27 önüm

6017

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

99 önüm

6018

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 0.970 mm – 12.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

80 önüm

1549

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 14.000 mm – 42.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

30 önüm

1548

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 14.000 mm – 42.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

30 önüm

1018

AeroX split point drill

AeroX split point drill. Designation: AeroX split point drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

133 önüm

6030

Short flute drill set

Short flute drill set. Designation: Short flute drill set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

1 önüm

693

Short flute drill

Short flute drill. Designation: Short flute drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

30 önüm

1137

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 6.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

3 önüm

311

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 1.100 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

25 önüm

634

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 7.800 mm – 49.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

25 önüm

635

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 8.000 mm – 31.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

6 önüm

623

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 10.000 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{

45 önüm

6999

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 6.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

1 önüm

6996

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 8.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

3 önüm

9502

Jobber drill StepPower

Jobber drill StepPower. Designation: Jobber drill StepPower, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

43 önüm

464

Pilot for fine tolerances

Pilot for fine tolerances. Designation: Pilot for fine tolerances, Diameter range: 8.400 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

18 önüm

465

Pilot for medial tolerances

Pilot for medial tolerances. Designation: Pilot for medial tolerances, Diameter range: 9.000 mm – 39.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

19 önüm

466

Pilot for tapping size holes

Pilot for tapping size holes. Designation: Pilot for tapping size holes, Diameter range: 6.800 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

24 önüm

533

Straight shank core drill

Straight shank core drill. Designation: Straight shank core drill, Diameter range: 3.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 9.400 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

14 önüm

514

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 5.900 mm – 17.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

10 önüm

505

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 4.200 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"

52 önüm

541

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 9.000 mm – 22.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

7 önüm

539

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 10.000 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

9 önüm

569

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 7.500 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

5 önüm

540

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

7 önüm

536

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

6 önüm

576

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 14.000 mm – 40.000 mm, TABLE

6 önüm

537

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 11.000 mm – 29.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

6 önüm

574

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 8.000 mm – 40.000 mm, TABLE_

9 önüm

555

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 5.000 mm – 31.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

31 önüm

538

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

7 önüm

561

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 2.400 mm – 5.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr

22 önüm

575

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 8.000 mm – 20.000 mm, TABLE_

6 önüm

534

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 7.400 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

126 önüm

578

Aircraft extension drill, 12 inches long

Aircraft extension drill, 12 inches long. Designation: Aircraft extension drill, 12 inches long, Diameter range: 1.500 mm – 8.500 mm, TABLE_INFO_PASSON: [{

49 önüm

570

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 12.000 mm – 23.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

4 önüm

577

Aircraft extension drill, 6 inches long

Aircraft extension drill, 6 inches long. Designation: Aircraft extension drill, 6 inches long, Diameter range: 1.500 mm – 8.500 mm, TABLE_INFO_PASSON: [{"a

58 önüm

554

Straight shank drills double-ended

Straight shank drills double-ended. Designation: Straight shank drills double-ended, Diameter range: 1.450 mm – 10.500 mm, TABLE_INFO_PASSON: [{"attr":"P",

68 önüm

551

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 5.500 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

91 önüm

637

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 11.500 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

4 önüm

638

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"}

2 önüm

639

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 10.000 mm – 26.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

5 önüm

579

Aircraft extension drill, 6 inches long

Aircraft extension drill, 6 inches long. Designation: Aircraft extension drill, 6 inches long, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"a

58 önüm

580

Aircraft extension drill, 12 inches long

Aircraft extension drill, 12 inches long. Designation: Aircraft extension drill, 12 inches long, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{

54 önüm

6403

Vent hole drill

Vent hole drill. Designation: Vent hole drill, Diameter range: 0.500 mm – 2.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"}

55 önüm

636

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.600 mm – 17.200 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

5 önüm

656

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 6.200 mm – 20.640 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

20 önüm

666

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

100 önüm

531

Taper pin drills

Taper pin drills. Designation: Taper pin drills, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 önüm

1839

Machine combination drill taps for ISO metric threads

Machine combination drill taps for ISO metric threads. Designation: Machine combination drill taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P",

7 önüm

4684

StepPower combination drill tap

StepPower combination drill tap. Designation: StepPower combination drill tap, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

6 önüm

303

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.160 mm – 1.950 mm, TABLE_INFO_PA

153 önüm

741

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 15.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

1 önüm

729

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 19.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr

14 önüm

716

Masonry drill

Masonry drill. Designation: Masonry drill, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

8 önüm

707

Carbide tipped spade drill

Carbide tipped spade drill. Designation: Carbide tipped spade drill, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

8 önüm

1149

Kevlar drill

Kevlar drill. Designation: Kevlar drill, Diameter range: 2.380 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

15 önüm

4100

Deburring fork

Deburring fork. Designation: Deburring fork, Diameter range: 2.10 - 2.34, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"

15 önüm

3899

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.100 mm – 3.000 mm, TABLE_INFO_PA

289 önüm

6408

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 önüm

5652

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.100 mm – 3.000 mm, TABLE_INFO_PA

27 önüm

6400

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

55 önüm

6405

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 önüm

6401

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

55 önüm

6412

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 önüm

750

Straight shank core drill

Straight shank core drill. Designation: Straight shank core drill, Diameter range: 3.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

11 önüm

701

Micro-precision drill AL without coolant ducts

Micro-precision drill AL without coolant ducts. Designation: Micro-precision drill AL without coolant ducts, Diameter range: 0.200 mm – 3.000 mm, TABLE_INF

65 önüm

739

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 4.500 mm – 11.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

5 önüm

738

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

6 önüm

4101

Deburring fork

Deburring fork. Designation: Deburring fork, Diameter range: 3.70 - 4.24, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"

15 önüm

8352

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

11 önüm

8371

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

11 önüm

2873

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

5 önüm

2883

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 önüm

2885

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

11 önüm

2857

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

8 önüm

8266

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

8 önüm

4526

CAT hydraulic chucks for internal cooling

CAT hydraulic chucks for internal cooling. Designation: CAT hydraulic chucks for internal cooling, Diameter range: 2.8 - 10.0, Internal diameter: 32.00 mm,

6 önüm

4576

Synchro tapping chuck SK

Synchro tapping chuck SK. Designation: Synchro tapping chuck SK, Diameter range: 2.5 - 5.0, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

7 önüm

28002

High feed milling cutter with indexable inserts, shell milling cutter

High feed milling cutter with indexable inserts, shell milling cutter. Designation: High feed milling cutter with indexable inserts, shell milling cutter,

6 önüm

4598

MAS/BT DC hydro expansion chuck with axial plane

MAS/BT DC hydro expansion chuck with axial plane. Designation: MAS/BT DC hydro expansion chuck with axial plane, Internal diameter: 18.00 mm, TABLE_INFO_PA

8 önüm

4577

Synchro tapping chuck MAS/BT for internal cooling

Synchro tapping chuck MAS/BT for internal cooling. Designation: Synchro tapping chuck MAS/BT for internal cooling, Diameter range: 6.0 - 16.0, Internal dia

7 önüm

28001

High feed milling cutter with indexable inserts, screw-in thread

High feed milling cutter with indexable inserts, screw-in thread. Designation: High feed milling cutter with indexable inserts, screw-in thread, Diameter r

9 önüm

4597

SK hydro expansion chuck, slim design 3°

SK hydro expansion chuck, slim design 3°. Designation: SK hydro expansion chuck, slim design 3°, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P

16 önüm

4601

Synchro tapping chuck HSK-A for internal cooling

Synchro tapping chuck HSK-A for internal cooling. Designation: Synchro tapping chuck HSK-A for internal cooling, Internal diameter: 32.00 mm, TABLE_INFO_PA

9 önüm

4561

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 10.00 mm, TABLE_INFO_

10 önüm

4564

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 14.

27 önüm

4563

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 18.00 mm, TABLE_INFO_

27 önüm

4560

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

10 önüm

4362

HSK-A milling arbor

HSK-A milling arbor. Designation: HSK-A milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

48 önüm

4562

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 32.

10 önüm

28487

Aluminium milling cutter with indexable inserts, screw-in threads

Aluminium milling cutter with indexable inserts, screw-in threads. Designation: Aluminium milling cutter with indexable inserts, screw-in threads, Diameter

3 önüm

28486

Aluminium milling cutter with indexable inserts, shell milling cutter

Aluminium milling cutter with indexable inserts, shell milling cutter. Designation: Aluminium milling cutter with indexable inserts, shell milling cutter,

4 önüm

4230

MAS/BT milling arbor

MAS/BT milling arbor. Designation: MAS/BT milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

31 önüm

4869

Pull stud

Pull stud. Designation: Pull stud, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

6 önüm

4889

Pull stud

Pull stud. Designation: Pull stud, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

6 önüm

4203

Coolant distribution screw

Coolant distribution screw. Designation: Coolant distribution screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

8 önüm

8170

Mounting key BT 800

Mounting key BT 800. Designation: Mounting key BT 800, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

17 önüm

8192

Countersink holder with depth stop

Countersink holder with depth stop. Designation: Countersink holder with depth stop, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

1 önüm

8358

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 önüm

8357

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 önüm

8336

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

8359

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

11 önüm

8343

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 önüm

8344

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 önüm

8334

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 önüm

8335

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 önüm

8364

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 önüm

8366

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 önüm

25930

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

3 önüm

4490

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

12 önüm

4706

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

9 önüm

4707

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

8 önüm

4708

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

9 önüm

4704

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

9 önüm

4199

Holder for screw-in milling cutter HSK-A

Holder for screw-in milling cutter HSK-A. Designation: Holder for screw-in milling cutter HSK-A, Internal diameter: 8.50 mm, TABLE_INFO_PASSON: [{"attr":"P

24 önüm

25914

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

3 önüm

4703

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 önüm

4705

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

8 önüm

8276

Fluteless tap with coolant ducts for UNF threads

Fluteless tap with coolant ducts for UNF threads. Designation: Fluteless tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 önüm

8275

Fluteless tap with coolant ducts for UNC threads

Fluteless tap with coolant ducts for UNC threads. Designation: Fluteless tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 önüm

8327

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

9 önüm

8278

Fluteless tap with coolant ducts for UNF threads

Fluteless tap with coolant ducts for UNF threads. Designation: Fluteless tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 önüm

8313

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

8277

Fluteless tap with coolant ducts for UNC threads

Fluteless tap with coolant ducts for UNC threads. Designation: Fluteless tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 önüm

8325

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

11 önüm

8328

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

10 önüm

8314

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

8087

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 önüm

8274

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

20 önüm

8273

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

19 önüm

8326

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

10 önüm

8086

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 önüm

28401

Clamping screw

Clamping screw. Designation: Clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

3 önüm

6174

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 önüm

6176

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 önüm

6175

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 önüm

6924

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

19 önüm

28485

Aluminium milling cutter with indexable inserts, straight shank

Aluminium milling cutter with indexable inserts, straight shank. Designation: Aluminium milling cutter with indexable inserts, straight shank, Diameter ran

2 önüm

28000

High feed milling cutter with indexable inserts, straight shank Weldon

High feed milling cutter with indexable inserts, straight shank Weldon. Designation: High feed milling cutter with indexable inserts, straight shank Weldon

4 önüm

4525

Synchro tapping chuck with straight shank for internal cooling

Synchro tapping chuck with straight shank for internal cooling. Designation: Synchro tapping chuck with straight shank for internal cooling, Diameter range

8 önüm

4873

Interchangeable shank for modular fluteless taps

Interchangeable shank for modular fluteless taps. Designation: Interchangeable shank for modular fluteless taps, Diameter range: 9.000 mm – 18.000 mm, TABL

14 önüm

6121

Interchangeable shank for modular taps

Interchangeable shank for modular taps. Designation: Interchangeable shank for modular taps, Diameter range: 9.000 mm – 22.000 mm, TABLE_INFO_PASSON: [{"at

16 önüm

8351

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

7 önüm

8346

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 önüm

8341

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 önüm

8349

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

9 önüm

8347

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 önüm

8342

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 önüm

8348

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

9 önüm

8319

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

11 önüm

8350

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

4 önüm

8337

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 önüm

8333

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 önüm

8332

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 önüm

8355

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 önüm

8345

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 önüm

8339

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 önüm

8320

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

11 önüm

8321

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 önüm

8322

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

4 önüm

8338

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 önüm

8340

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

16 önüm

1904

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

10 önüm

8368

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 önüm

8370

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","v

7 önüm

8365

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 önüm

8362

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 önüm

2853

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

26 önüm

2863

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 önüm

4795

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

7 önüm

4796

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 önüm

313

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 önüm

4859

Machine tap for BSP threads

Machine tap for BSP threads. Designation: Machine tap for BSP threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 önüm

2993

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

9 önüm

2992

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

18 önüm

4798

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

17 önüm

805

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

12 önüm

6571

Fluteless machine tap for BSP-threads

Fluteless machine tap for BSP-threads. Designation: Fluteless machine tap for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

5 önüm

6573

Fluteless tap with coolant ducts for BSP threads

Fluteless tap with coolant ducts for BSP threads. Designation: Fluteless tap with coolant ducts for BSP threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

5 önüm

8264

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

5 önüm

8286

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

12 önüm

852

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

29 önüm

8265

Tap with coolant ducts for UNF threads

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

5 önüm

6567

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

4 önüm

6557

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 önüm

8282

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

17 önüm

6565

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

10 önüm

6568

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

12 önüm

6562

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 önüm

6572

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

9 önüm

8100

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"full

9 önüm

6555

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

17 önüm

8284

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

12 önüm

8280

Fluteless tap for EG/STI UNF threads

Fluteless tap for EG/STI UNF threads. Designation: Fluteless tap for EG/STI UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

12 önüm

8101

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"full

11 önüm

8269

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

4 önüm

6558

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

9 önüm

8092

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 önüm

8268

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"f

7 önüm

8272

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

9 önüm

8263

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

7 önüm

8090

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 önüm

6561

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 önüm

8288

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

17 önüm

8082

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 önüm

8080

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 önüm

8290

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

17 önüm

8354

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

25 önüm

8330

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

26 önüm

6570

Fluteless machine tap for ISO metric fine threads

Fluteless machine tap for ISO metric fine threads. Designation: Fluteless machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-

9 önüm

8270

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

6 önüm

8289

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

17 önüm

8287

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

17 önüm

8285

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

13 önüm

8279

Fluteless tap for EG/STI UNC threads

Fluteless tap for EG/STI UNC threads. Designation: Fluteless tap for EG/STI UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

13 önüm

6559

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

11 önüm

6563

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

9 önüm

6564

Machine tap for EG/STI threads

Machine tap for EG/STI threads. Designation: Machine tap for EG/STI threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

11 önüm

8271

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

6 önüm

6560

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

17 önüm

6569

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

9 önüm

8262

Fluteless machine tap for UNC-threads

Fluteless machine tap for UNC-threads. Designation: Fluteless machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 önüm

6556

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 önüm

8093

Fluteless tap with coolant ducts for BSP threads

Fluteless tap with coolant ducts for BSP threads. Designation: Fluteless tap with coolant ducts for BSP threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

5 önüm

8283

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

13 önüm

8281

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

17 önüm

8091

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

7 önüm

6566

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 önüm

8088

Fluteless machine tap for ISO metric threads

Fluteless machine tap for ISO metric threads. Designation: Fluteless machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

11 önüm

8089

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

11 önüm

8081

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 önüm

8363

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

33 önüm

5691

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

44 önüm

5694

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 önüm

5693

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

42 önüm

5692

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

51 önüm

5682

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 önüm

5688

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

44 önüm

5164

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

51 önüm

5681

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 önüm

28504

SOLX indexable insert, single-sided external

SOLX indexable insert, single-sided external. Designation: SOLX indexable insert, single-sided external, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 önüm

28505

SOLX indexable insert, single-sided external

SOLX indexable insert, single-sided external. Designation: SOLX indexable insert, single-sided external, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 önüm

26605

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 önüm

28508

XOLX indexable insert single-sided, internal

XOLX indexable insert single-sided, internal. Designation: XOLX indexable insert single-sided, internal, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 önüm

26608

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

1 önüm

26814

Indexable insert for back turning

Indexable insert for back turning. Designation: Indexable insert for back turning, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},

5 önüm

26826

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 önüm

27291

Cutting insert for drilling and boring

Cutting insert for drilling and boring. Designation: Cutting insert for drilling and boring, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 önüm

26818

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 önüm

26802

Indexable insert for radial grooving and copying

Indexable insert for radial grooving and copying. Designation: Indexable insert for radial grooving and copying, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

8 önüm

28509

XOLX indexable insert single-sided, internal

XOLX indexable insert single-sided, internal. Designation: XOLX indexable insert single-sided, internal, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 önüm

26822

Cutting insert

Interchangeable head for modular fluteless taps. Designation: Interchangeable head for modular fluteless taps, Diameter range: 12.000 mm – 24.000 mm, TABLE

14 önüm

495

90° Front/back deburrer

90° Front/back deburrer. Designation: 90° Front/back deburrer, Diameter range: 2.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

29 önüm

6166

Ball nose end mill G-Mold 55 B short shank

Ball nose end mill G-Mold 55 B short shank. Designation: Ball nose end mill G-Mold 55 B short shank, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON

6 önüm

8292

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

7 önüm

6578

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 önüm

6577

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 önüm

6581

Fluteless tap for ISO metric threads

9 önüm

8085

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

9 önüm

6829

Micro-precision milling cutter MicroMill µ 55 U

Micro-precision milling cutter MicroMill µ 55 U. Designation: Micro-precision milling cutter MicroMill µ 55 U, Diameter range: 0.200 mm – 3.000 mm, TABLE_I

45 önüm

28488

XDHT indexable insert

XDHT indexable insert. Designation: XDHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

7 önüm

6149

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

10 önüm

4477

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 önüm

6148

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

10 önüm

4880

Micro thread milling cutter for UNC/UNF threads

Micro thread milling cutter for UNC/UNF threads. Designation: Micro thread milling cutter for UNC/UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

24 önüm

6469

Ratio end mill set RF 100 Sharp extra short

Ratio end mill set RF 100 Sharp extra short. Designation: Ratio end mill set RF 100 Sharp extra short, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"at

1 önüm

6808

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

19 önüm

6167

Ball nose end mill G-Mold 55 B short shank

Ball nose end mill G-Mold 55 B short shank. Designation: Ball nose end mill G-Mold 55 B short shank, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON

6 önüm

6165

Ratio end mill RF 100 Sharp short shank

Ratio end mill RF 100 Sharp short shank. Designation: Ratio end mill RF 100 Sharp short shank, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"a

5 önüm

6468

Ratio end mill set RF 100 Sharp extra short

Ratio end mill set RF 100 Sharp extra short. Designation: Ratio end mill set RF 100 Sharp extra short, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"at

1 önüm

6164

Ratio end mill RF 100 Sharp short shank

Ratio end mill RF 100 Sharp short shank. Designation: Ratio end mill RF 100 Sharp short shank, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"a

5 önüm

6691

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

54 önüm

6163

Ratio end mill RF 100 Sharp extra short short shank

Ratio end mill RF 100 Sharp extra short short shank. Designation: Ratio end mill RF 100 Sharp extra short short shank, Diameter range: 0.800 mm – 3.000 mm,

11 önüm

6809

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

15 önüm

6692

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

52 önüm

9039

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 önüm

9033

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 önüm

9029

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

7 önüm

9031

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 önüm

9026

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 önüm

9051

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 önüm

9042

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 önüm

9047

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 önüm

9046

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 önüm

9030

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 önüm

9035

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 önüm

9045

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 önüm

9041

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 önüm

9034

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 önüm

9002

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 önüm

9014

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 önüm

9038

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 önüm

9010

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

10 önüm

9032

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 önüm

9006

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 önüm

9022

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

10 önüm

9037

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

11 önüm

9018

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 önüm

9043

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 önüm

9044

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 önüm

9036

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

12 önüm

9040

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

8 önüm

9197

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

42 önüm

9195

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 önüm

9194

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 önüm

9198

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

42 önüm

9193

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 önüm

9191

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P

33 önüm

9190

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P

22 önüm

9196

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 önüm

9192

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P

41 önüm

6060

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

64 önüm

5234

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

97 önüm

5689

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

97 önüm

5690

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

64 önüm

5812

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

93 önüm

9021

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

2 önüm

9027

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

2 önüm

9008

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

5 önüm

9012

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

5 önüm

9013

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

2 önüm

9015

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 1.000 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

3 önüm

9005

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

3 önüm

9050

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

1 önüm

9017

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

3 önüm

9019

End mill

End mill. Designation: End mill, Diameter range: 2.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"

2 önüm

9028

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

2 önüm

9048

End mill

End mill. Designation: End mill, Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"

2 önüm

9004

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

5 önüm

9011

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

2 önüm

9049

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 1.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

1 önüm

9003

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

6 önüm

9009

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

3 önüm

9025

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

2 önüm

9007

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

6 önüm

9020

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

3 önüm

9023

End mill

End mill. Designation: End mill, Diameter range: 1.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"

2 önüm

9024

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

5 önüm

9016

End mill (multiple fluted)

End mill (multiple fluted). Designation: End mill (multiple fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

5 önüm

5639

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 önüm

5669

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 önüm

5641

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 önüm

5460

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 önüm

5023

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 önüm

5018

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 önüm

6061

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 önüm

5022

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 önüm

5642

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 önüm

5640

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 önüm

4605

Reduction sleeve for hydro synchro tapping chucks

Reduction sleeve for hydro synchro tapping chucks. Designation: Reduction sleeve for hydro synchro tapping chucks, Diameter range: 4.005 mm – 32.000 mm, In

84 önüm

4606

Reduction sleeve for hydro synchro tapping chucks

Reduction sleeve for hydro synchro tapping chucks. Designation: Reduction sleeve for hydro synchro tapping chucks, Diameter range: 12.000 mm – 32.000 mm, I

77 önüm

26700

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 önüm

26702

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

5 önüm

26703

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

5 önüm

26104

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 önüm

26701

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 önüm

26106

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

6 önüm

26105

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 önüm

26107

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 önüm

26202

Reinforced parting off blade without IC

Reinforced parting off blade without IC. Designation: Reinforced parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 önüm

26207

Reinforced parting off blade with IC

Reinforced parting off blade with IC. Designation: Reinforced parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

2 önüm

26203

Reinforced parting off blade without IC

Reinforced parting off blade without IC. Designation: Reinforced parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 önüm

26206

Reinforced parting off blade with IC

Reinforced parting off blade with IC. Designation: Reinforced parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

2 önüm

28902

Eccentric bushing

Eccentric bushing. Designation: Eccentric bushing, Diameter range: 20.000 mm – 40.000 mm, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val

4 önüm

6095

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 5.556 mm, TABLE_INFO_PASSON: [{"att

44 önüm

6094

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"att

55 önüm

6092

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

79 önüm

6091

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

79 önüm

6093

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 10.319 mm, TABLE_INFO_PASSON: [{"at

71 önüm

5633

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

35 önüm

5647

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

50 önüm

5024

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 0.900 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

26 önüm

5684

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 0.900 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

15 önüm

5020

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

35 önüm

5632

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

25 önüm

5026

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

29 önüm

5648

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

37 önüm

5021

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

38 önüm

5638

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

38 önüm

6075

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 6.500 mm, TABLE_INFO_PASSON: [{"attr":"P"

51 önüm

5685

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

77 önüm

5687

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

37 önüm

5686

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

50 önüm

5646

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

77 önüm

6072

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 önüm

6071

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 önüm

5637

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

29 önüm

6074

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 8.731 mm, TABLE_INFO_PASSON: [{"attr":"P"

64 önüm

6073

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 önüm

8154

Drill head holder BT 800

Drill head holder BT 800. Designation: Drill head holder BT 800, Diameter range: 25.000 - 25.499, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

66 önüm

6062

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

146 önüm

6063

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

146 önüm

6064

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

138 önüm

6407

Step ratio drill with coolant ducts

Step ratio drill with coolant ducts. Designation: Step ratio drill with coolant ducts, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P

16 önüm

7052

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

127 önüm

6591

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [

124 önüm

6589

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

191 önüm

8512

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 önüm

8514

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 önüm

8518

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

148 önüm

8513

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 önüm

6590

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

191 önüm

6592

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [

124 önüm

4870

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

18 önüm

6939

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 3.500 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

22 önüm

6459

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

83 önüm

6461

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

83 önüm

6457

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

77 önüm

6065

Flat bottom drill with coolant ducts, 3-fluted

Flat bottom drill with coolant ducts, 3-fluted. Designation: Flat bottom drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_IN

125 önüm

6066

Flat bottom drill with coolant ducts, 3-fluted

Flat bottom drill with coolant ducts, 3-fluted. Designation: Flat bottom drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_IN

125 önüm

6951

Circular milling cutter full radius

Circular milling cutter full radius. Designation: Circular milling cutter full radius, Diameter range: 3.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"attr":"P

13 önüm

6815

Ball nose end mill G-Mold µ 65 B

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19 önüm

6949

Circular milling cutter corner chamfer

Circular milling cutter corner chamfer. Designation: Circular milling cutter corner chamfer, Diameter range: 3.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"at

12 önüm

6950

Circular milling cutter corner radius

Circular milling cutter corner radius. Designation: Circular milling cutter corner radius, Diameter range: 7.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"attr

11 önüm

6172

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

13 önüm

6713

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 önüm

6173

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

13 önüm

6932

Circular segment milling cutter G-Mold 55 CS

Circular segment milling cutter G-Mold 55 CS. Designation: Circular segment milling cutter G-Mold 55 CS, Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_P

5 önüm

8221

Ratio end mill RF 100 AL µF

Ratio end mill RF 100 AL µF. Designation: Ratio end mill RF 100 AL µF, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

14 önüm

8220

Ratio end mill RF 100 AL µF

Ratio end mill RF 100 AL µF. Designation: Ratio end mill RF 100 AL µF, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

14 önüm

6931

Circular segment milling cutter G-Mold 55 CS

Circular segment milling cutter G-Mold 55 CS. Designation: Circular segment milling cutter G-Mold 55 CS, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_P

4 önüm

6933

Circular segment milling cutter G-Mold 55 CS

Circular segment milling cutter G-Mold 55 CS. Designation: Circular segment milling cutter G-Mold 55 CS, Diameter range: 10.000 mm – 16.000 mm, TABLE_INFO_

3 önüm

8222

Ratio end mill RF 100 AL µF

Ratio end mill RF 100 AL µF. Designation: Ratio end mill RF 100 AL µF, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

14 önüm

6930

End mill CR 200 for fibre-reinforced plastics

End mill CR 200 for fibre-reinforced plastics. Designation: End mill CR 200 for fibre-reinforced plastics, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO

9 önüm

6923

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

14 önüm

6552

Micro HPC milling cutter

Micro HPC milling cutter. Designation: Micro HPC milling cutter, Diameter range: 0.300 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 önüm

6456

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 0.800 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

135 önüm

6458

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

119 önüm

6550

Micro HPC milling cutter

Micro HPC milling cutter. Designation: Micro HPC milling cutter, Diameter range: 0.300 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 önüm

6925

End mill CR 200 for fibre-reinforced plastics

End mill CR 200 for fibre-reinforced plastics. Designation: End mill CR 200 for fibre-reinforced plastics, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO

9 önüm

6460

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

119 önüm

6938

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 0.800 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

33 önüm

8151

Drill head holder BT 800

Drill head holder BT 800. Designation: Drill head holder BT 800, Diameter range: 25.000 - 25.499, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

66 önüm

8152

Drill head holder BT 800

Drill head holder BT 800. Designation: Drill head holder BT 800, Diameter range: 25.000 - 25.499, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

66 önüm

8150

Drill head holder BT 800

Drill head holder BT 800. Designation: Drill head holder BT 800, Diameter range: 25.000 - 25.499, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

66 önüm

8153

Drill head holder BT 800

Drill head holder BT 800. Designation: Drill head holder BT 800, Diameter range: 25.000 - 25.499, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","v

66 önüm

28503

Indexable insert drills GMD

Indexable insert drills GMD. Designation: Indexable insert drills GMD, Diameter range: 14.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

63 önüm

28500

Indexable insert drills GMD

Indexable insert drills GMD. Designation: Indexable insert drills GMD, Diameter range: 14.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

63 önüm

28502

Indexable insert drills GMD

Indexable insert drills GMD. Designation: Indexable insert drills GMD, Diameter range: 14.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

63 önüm

28501

Indexable insert drills GMD

Indexable insert drills GMD. Designation: Indexable insert drills GMD, Diameter range: 14.000 mm – 60.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

63 önüm

6130

Machine reamer

Machine reamer. Designation: Machine reamer, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial

1 önüm

1676

High-performance reamer, fixed-size series

High-performance reamer, fixed-size series. Designation: High-performance reamer, fixed-size series, Diameter range: 1.950 mm – 20.050 mm, TABLE_INFO_PASSO

308 önüm

1685

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

75 önüm

1686

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

75 önüm

1675

High-performance reamer, fixed-size series

High-performance reamer, fixed-size series. Designation: High-performance reamer, fixed-size series, Diameter range: 1.950 mm – 20.050 mm, TABLE_INFO_PASSO

308 önüm

4196

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 3.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

4195

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 3.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

21 önüm

7285

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 önüm

7286

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 önüm

8148

Promotion – Modular drill with interchangeable head BT 800 3xD

Promotion – Modular drill with interchangeable head BT 800 3xD. Designation: Promotion – Modular drill with interchangeable head BT 800 3xD, Diameter range

161 önüm

8149

Promotion – Modular drill with interchangeable head BT 800 5xD

Promotion – Modular drill with interchangeable head BT 800 5xD. Designation: Promotion – Modular drill with interchangeable head BT 800 5xD, Diameter range

161 önüm

9500

Jobber drill StepPower

Jobber drill StepPower. Designation: Jobber drill StepPower, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

57 önüm

6162

Micro-precision drill without coolant ducts with short shank

Micro-precision drill without coolant ducts with short shank. Designation: Micro-precision drill without coolant ducts with short shank, Diameter range: 0.

55 önüm

6161

Micro-precision drill without coolant ducts with short shank

Micro-precision drill without coolant ducts with short shank. Designation: Micro-precision drill without coolant ducts with short shank, Diameter range: 0.

55 önüm

6488

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

52 önüm

7053

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.800 mm – 3.000 mm, TABLE_INFO_PA

45 önüm

6489

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 önüm

6487

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

66 önüm

6493

Micro-precision drill XL with coolant ducts

Micro-precision drill XL with coolant ducts. Designation: Micro-precision drill XL with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASS

47 önüm

6491

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 önüm

6490

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 önüm

6494

Micro-precision drill XL with coolant ducts

Micro-precision drill XL with coolant ducts. Designation: Micro-precision drill XL with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASS

47 önüm

8525

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

61 önüm

8526

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 önüm

8528

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 önüm

8527

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 önüm

6045

Straight-fluted drill, 4-fluted VB 100 P

Straight-fluted drill, 4-fluted VB 100 P. Designation: Straight-fluted drill, 4-fluted VB 100 P, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [

77 önüm

6044

Straight-fluted drill, 4-fluted VB 100 P

Straight-fluted drill, 4-fluted VB 100 P. Designation: Straight-fluted drill, 4-fluted VB 100 P, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [

77 önüm

6497

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 önüm

DEMO-3420

End mill 4-flute, 45 degree helix

Universal 4-flute end mill for roughing and finishing of steel and stainless steel. Unequal helix reduces chatter.

5 önüm

DEMO-6497

Solid carbide drill 5xD, internal coolant

High-performance solid carbide drill for steel and cast iron. Four-facet point, internal coolant channels, TiAlN coating. Suitable for depths up to 5xD.

5 önüm

DEMO-RT100U

Machine tap RT 100 U, universal

Universal machine tap for through and blind holes in a wide range of materials. Spiral point and spiral flute versions available.

5 önüm